manual de utilizador(Windows 7)
operating the cleaner _21
03 OPERATING THE CLEANER
Installing the charger
Power Lamp
Charging Lamp
1. Install the charger on a flat surface.
2. There should be no obstacles 0.5m to the left and right
and within 1m of the front.
about 1m
about 0.5m
about 0.5m
3. Install the charger in a location where it can be easily
accessed by the robotic vacuum cleaner.
4. Arrange the power cord along the wall.
5. When the floor is made of wood, install the charger in the
same direction as the grain of the wood.
NOTE
Always keep the power cord of the charger plugged into
the power outlet.
- If no power is supplied to the charger, the robotic vacuum
will not be able to find the charger and will not be able to
charge automatically.
- If the robotic vacuum cleaner is separated from the
charger, the battery is automatically discharged.