manual de utilizador(Windows 7)

safety information _11
01 SAFETY INFORMATION
NOTE
Vacuum cleaning Robot may not be able to continue its
operation if it is stuck at the entrance or veranda doorsill.
- Vacuum cleaning Robot stops operating for safety reasons if it
cannot move for more than 5 minutes.
- To resume operating, turn the Power Switch o and then on again
after moving it to a location where it can continue cleaning.
NOTE
Vacuum cleaning Robot cannot completely clean locations
that it cannot reach, such as corners, and spaces between
sofas and walls.
- Please clean these locations occasionally.
NOTE
Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to
pick up dust clusters that were formed while cleaning.
- In this case, sweep up the dust with another cleaning tool.
CLEANING AND MAINTENANCE
CAUTION
When cleaning the product, do not spray water directly onto
the exterior or wipe it with a volatile material such as benzene,
thinner or alcohol.
- This may result in critical damage to the product.
CAUTION
Do not forcefully press the bumper on the Vacuum cleaning
Robot.
- If the bumper sensor gets damaged, the Vacuum cleaning Robot
may bump into walls or furniture.
CAUTION
The unit must not be disassembled or reconstructed by
anyone other than a qualified service engineer.
- This may result in damage to the product.