Vacuum Cleaning Robot user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. Thank you for purchasing a Samsung product.
safety information Safety information WARNING • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. CAUTION/WARNING SYMBOLS USED WARNING caution Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists.
Important safety instructions When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANING ROBOT. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fire, electric shock, or injury: GENERAL • Use only as described in this manual. • Do not operate the vacuum cleaning robot or charger if it has been damaged in any way.
• Do not use extension cords or outlets with inadequate current carrying capacity. • Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. • Do not mutilate or incinerate batteries as they will explode at high temperatures. • Do not attempt to open the charger. Repairs should only be carried out by a qualified customer care centre. • Do not expose the charger to high temperatures or allow moisture or humidity of any kind to come into contact with the charger.
contents safety information 02 06 07 10 11 Power Related Before Use In Use Cleaning and Maintenance product features 13 assembling the cleaner 15 operating the cleaner 20 maintain tools and filters 34 troubleshooting 40 15 Components 16 Name of each part 20 Installing the vacuum cleaning robot 20 Installation order 20 Turning the Power Switch on or off 21 Installing the charger 22 Charging 23 About the Battery 24 Installing the virtual guard (option) 25 Installing the air freshener 26 Using t
safety information Power Related WARNING WARNING Do not bend the power cord forcefully or place a heavy object on it that could break it. -- This may result in fire or electric shock. Make sure to remove any dust or water from the power plug. -- Failing to do so may result in a malfunction or electric shock. WARNING Do not pull the power plug by the cord or touch the plug with wet hands. -- This may result in fire or electric shock. WARNING Do not use multiple plugs in a single socket.
Before Use CAUTION CAUTION CAUTION CAUTION CAUTION Never use vacuum cleaning robot in locations with combustible material such as. -- Locations with candles or desk lamps on the floor. -- Locations with unattended fires (fire or embers). -- Locations with gasoline, distilled alcohol, thinner, ashtrays with burning cigarettes, etc. Vacuum cleaning Robot is for domestic use only. Do not use it in the following locations.
CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION Remove small objects or brittle items from the area to be cleaned in advance. -- Make sure to clear any objects before cleaning. -- Make sure to remove fragile items such as china, glass objects, flowerpots, and etc. -- Robotic vacuum cleaner does not recognize coins, rings or other valuable items such as jewelry. Remove objects scattered on the floor before cleaning. -- Vacuum cleaning robot is designed to detect obstacles 5cm away from it.
CAUTION CAUTION Objects in front of the charger will prevent the vacuum cleaning robot from auto-charging itself. -- Clear the area. ut abo 0.5 t1 Make sure that there is no trace of liquids on the charger station. -- Failing to do so may result in fire or electric shock. warning CAUTION warning m m .5 m ut 0 abo .5 m ut 0 warning 0.5 ou abo Do not short-circuit the charge pins with metal objects such as chopsticks, screwdrivers, and etc.
In Use CAUTION Do not lie down around the Robot Vacuum that is running. -- Your hair may be caught between the power brush and the side brush, resulting in physical injury. CAUTION You cannot use the vacuum cleaning robot on thick carpets. -- This may result in problems with the vacuum cleaning robot. -- This may result in damage to carpets. CAUTION Do not use the vacuum cleaning robot on a table or other high locations. -- This may result in damage when the unit accidentally drops.
note note Vacuum cleaning Robot cannot completely clean locations that it cannot reach, such as corners, and spaces between sofas and walls. -- Please clean these locations occasionally. Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to pick up dust clusters that were formed while cleaning. -- In this case, sweep up the dust with another cleaning tool.
WARNING Remove any foreign substances accumulated on the Obstacle and Cliff sensors on a regular basis. -- Dirt accumulated on the sensors will result in inaccurate functioning of the sensors. Cliff sensor Obstacle sensor WARNING When removing foreign substances, always use the cleaning brush after turning the Power Switch off. -- Failing to do so may result in sudden operation of the unit and cause an injury or critical damage to the product.
product features Convenient VIRTUAL GUARD Function You can confine the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode. • What is ceiling shape recognition (Visionary mapping plus™)? This function recognizes the shape of the ceiling using the camera on top to identify the area to be cleaned and determines the best way to pass over and clean every section of the floor.
Auto Charging When the battery is low, the robotic vacuum cleaner is automatically guided to the charger to enable it to perform a quick auto charge. Edge-Cleaning Side ROTATING Brush The edge-cleaning side rotating brush cleans dust from the edges. Doorsill Crossing About 1.5 cm Stair type Vertical type The robotic vacuum cleaner’s innovative driving system makes it possible for it to cross over doorsills with a height of about 1.5 cm and clean all rooms.
assembling the cleaner Components 02 assembling the cleaner ■■ Main Body ■■ Remote Control ■■ Charger ■■ Others Components ❈❈ Option User Manual (CD-ROM) / 2 Batteries VIRTUALGUARD Cleaning Brush Air Freshener ❈❈ Option Spare Filter assembling the cleaner _15
Name of each part [ Main unit ] Air freshener compartment cover Display Panel Operating Button VIRTUAL GUARD Sensor Remote Control Sensor Obstacle Sensor Obstacle Sensor Bumper Sensor Front Dust bin Eject Button Dust bin Remote Control Sensor Air freshener compartment cover Side Cliff Sensor Driving Wheel Side Brush Charge Pin Battery Cover Cliff Sensor Power Brush Charge Pin Power Brush Cover Roller Power Switch Driving Wheel Cliff Sensor Bottom 16_ assembling the cleaner
[ Charger ] Power Lamp Charging Lamp Vents Catching Sill [ VIRTUAL GUARD (OPTION) ] Power Button Mode Lamp Main Body Detection Sensor Distance Detection Sensor ■■ Installing the batteries Batteries are not supplied with the product. You have to purchase the batteries additionally. Install the batteries (type D) before use. 1 Lift the cover of the VIRTUAL GUARD while pressing the locking tab. 2 3 Install the batteries into the VIRTUAL GUARD as shown by the figure below.
■■ Remote Control Power Recharging Auto Max Spot Directional Buttons Start/Stop Manual Delay Start Edge ■■ Installing the Batteries Batteries are not installed in the remote control when purchasing the product. Install the batteries (type AAA) before use. 1 Lift the battery compartment cover at the back of the remote control, while pressing the locking tab. 2 3 Install the batteries into the remote control as shown by the figure below.
■■ Display panel 6 1 02 assembling the cleaner 3 5 A 7 B C 8 2 4 D 9 Display Part 1. -2. --3. -4. -5. -- Number Display Shows the timer display, progress status, and error codes using numbers, letters and graphics. Battery Level Indicator Charging: Shows the charging progress in 3 steps. In Use: Shows the battery charge level. The battery charge level is reduced by each level from FULL while operating. (When the battery is fully discharged, one level will flash to display “LO”.
operating the cleaner Installing the vacuum cleaning robot Installation order 1. Turning the Power Switch on or off To use the robotic vacuum cleaner, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the Charger To charge the robotic vacuum cleaner, you must first install the charger. Since the battery is discharged when the product is purchased, you must fully charge the battery before use. 3.
Installing the charger Power Lamp Charging Lamp 2. There should be no obstacles 0.5 m to the left and right and within 1 m of the front. .5 m ut 0 .5 m ut 0 abo abo ab ou t1 m 3. Install the charger in a location where it can be easily accessed by the robotic vacuum cleaner. 4. Arrange the power cord along the wall. 5. When the floor is made of wood, install the charger in the same direction as the grain of the wood.
Charging When the product is initially purchased, the battery is fully discharged, and you must charge the robotic vacuum cleaner manually. Power lamp Charging lamp Turn on the Power Switch at the bottom of the product. 1. After aligning the charge pins of the main unit with the charge pin of the charger, press the main unit until you hear a “Recharging power” sound from the charger. -- The Charging Lamp turns green. Charging Lamp Power Lamp 2. Check the charge status of the robotic vacuum cleaner.
About the Battery -- This battery is only for Samsung vacuum cleaning robot. It is strictly prohibited to use it for other appliances or for other purposes. -- Do not disassemble or modify the battery. -- Charge it in a location with good ventilation. -- Do not expose the battery to fire and do not heat it. -- Do not connect any metallic objects to the (+) or (-) terminals of the battery. -- Keep it indoors (0 °C~40 °C). -- Before you discard product, dispose of batteries in an environmentally safe manner.
Installing the virtual guard (option) You can confine the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode. Power Button Mode Lamp Main Unit Detection Sensor Distance Detection Sensor Button operations 1. Lamp operations -- Fence (virtual wall) Mode : The red lamp flashes. -- Off : The lamp is turned off. 2. Turn the Power Button on -- Whenever you press the Power button, Fence (virtual wall) mode → Power off is selected in this sequence.
caution Installing the air freshener Please install the air freshener before using the robotic vacuum cleaner. If the air freshener is installed, the robotic vacuum cleaner will give off a pleasant fragrance. Air freshener compartment 1. Remove the plastic bag containing the air freshener. 2. Open the air freshener compartment cover at the top of the Dust bin and put the air freshener in the compartment. 3. Close the air freshener compartment cover.
Using the vacuum cleaning robot Starting / Stopping Cleaning You can run or stop all robotic vacuum functions. ■■ Each robotic vacuum function only runs when the Power Switch is turned on. ■■ When the robotic vacuum is operating, press the ( ) button to cancel the operation and select a function. Turning the power on or off Turning the power on -- Remote control: Press the [Power] button. -- Main unit: Press the ( ) button.
Recharging You can have the robotic vacuum cleaner return to the charger to charge the battery by using the Recharging button. ■■ When the robotic vacuum cleaner is operating, press the ( ) button to cancel the operation and press the Recharging button. 03 operating the cleaner 1. Press the Recharging button. -- The main unit icon ( ) is turned on and the robotic vacuum cleaner will return to the charger. 2. To stop the robotic vacuum cleaner while it is returning to the charger, press the ( ) button. 3.
Auto Cleaning The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once. ■■ If cleaning begins when the robotic vacuum cleaner is docked with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.
Spot Cleaning Remote control button Configuration Sequence ▼ 1. Set the mode. 2times 2. Cancel the mode. While cleaning -- In Spot cleaning mode, the robotic vacuum cleaner cleans an area with a length of 1.5m and a width of 1.5m. -- When cleaning is completed, the robotic vacuum cleaner will display End, Stop, and Stand by. note When the robotic vacuum cleaner is docked with the charger station, spot cleaning is not supported.
Max Cleaning The robotic vacuum cleaner automatically moves and cleans until the battery runs out and the battery level flashes only one level. ■■ If cleaning begins when the robotic vacuum cleaner is docked with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.
Manual Cleaning You can move the robotic vacuum cleaner to clean a particular location directly by using the remote control. ■■ Move the robotic vacuum cleaner to the location where you want to perform manual cleaning. ■■ You can manually clean using the remote control only. Remote control button Configuration Sequence ▼ 1. Set the mode. 4times 2. Cancel the mode. While cleaning note When the robotic vacuum cleaner is docked with the charger station, manual cleaning is not supported.
Edge Cleaning When the Obstacle Sensor detects an obstacle during the cleaning, the Robotic vacuum Cleaner reduces its speed to minimize the bumping impact and the Bumper Sensor also helps it lower the bumping impact. It cleans the corners by reaching to them as close as possible. (This Robotic vacuum Cleaner is a touching type cleaner.) The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once.
Scheduled Cleaning You can schedule robotic vacuum cleaner to start cleaning from a particular time. (Time delay: Up to 23 hours) ■■ Scheduled cleaning is only performed when robotic vacuum cleaner is docked with the charger station. Remote control button Configuration Sequence (Example) To clean 5 hours Later from now 1. Enter the Scheduled Cleaning mode. The icon is turned on. ▼ low up 2. Whenever the button is pressed, the time is increased or decreased. Flash 3. Finish the setting. 4.
maintain tools and filters Cleaning the vacuum cleaning robot Please keep the cleaning and maintenance methods in mind ■■ When the Power Switch is damaged, please contact the service agent so that it does not cause any accidents. ■■ Do not use any means or mechanical devices not installed by the manufacturer that could accelerate the deformation of the robotic vacuum cleaner. ■■ Always turn off the power switch at the bottom of the main unit before cleaning the robotic vacuum.
Cleaning the Dust Bin and the Filters First, empty the dust bin before cleaning it. ■■ When separating the Dust bin, take care not to spill the dust out of the Dust bin. ■■ Empty the Dust bin in the following cases. 1. When dust has accumulated inside the Dust bin. 2. When the suction power suddenly becomes weak. 3. When the noise suddenly increases. 04 maintain tools and filters 1. Press the Dust Bin Eject (PUSH) button and pull the dust bin to separate the dust bin. 2.
Cleaning the Power Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. caution Because the dust in the Dust bin may come out, separate the Dust bin first before cleaning the power brush. 1. Separate the Dust bin by pressing the Dust bin Eject (PUSH) button. 2. After checking whether there are any foreign substances, press the hook that is fixing the brush cover to separate it. 3. Lift the power brush up from the main unit. 4.
6. After inserting the 3 tips at the top of the cover, push the other end in until it “clicks” into place. • To prevent the robotic vacuum cleaner from becoming clogged, be careful not to vacuum tooth picks or cotton swabs. • When removing foreign substances becomes difficult, contact a customer care center. • Because the power brush vacuums the dust on the floor, long strings or hair can become wrapped around the brush. Check and clean the power brush regularly.
Cleaning the Edge-Cleaning Side rotating Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush. 2. Wearing rubber gloves, wrap the side rotating brush with a cloth using hot water for about 10 seconds and wipe it on the cloth. 3. Turning the side rotating brush, repeat the procedures in Step 2. 4.
Cleaning the Driving Wheel You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic. ■■ If the robotic vacuum cleaner suddenly starts to zigzag, there may be foreign substances stuck on the driving wheel. 04 maintain tools and filters 1. When cleaning the driving wheel, place a soft cloth on the floor and flip the main unit, placing it down carefully. 2. Check for foreign substances and remove them using a stick or a pair of blunt nippers if necessary.
troubleshooting Checklist before SVC Calls Symptom Vacuum cleaning Robot does not operate at all before cleaning. Vacuum cleaning Robot stopped operating while cleaning. Checklist Measure to Take • Is the Power Switch turned on? • Turn on the Power Switch. • Is cleaning mode ( ) in the display panel turned on? • Press the ( ) button. (To turn it off, press and hold the ( ) button down for 3 seconds or longer.
Symptom Checklist Measure to Take 05 troubleshooting Vacuum cleaning • Check whether the power plug of Robot cannot find the the charger is plugged correctly charger. into the outlet. • If there are any obstacles within a range of about 1 m in front of the charger and about 0.5 m range to the left and right of the charger, you should remove the obstacles. • If there are any foreign substances on the change pin, wipe them off with a dry towel.
Troubleshooting for Error Codes ERROR CODE CAUSE SOLUTION • Vacuum cleaning Robot is caught, • Turn off the Power Switch at the bottom and stuck or trapped while navigating. move the robotic vacuum cleaner to a different location. • A foreign substance (string, paper, • Turn off the Power Switch at the bottom and toy etc.) is caught in the power remove the foreign substance from the power brush. brush. • A foreign substance (string, paper, • Turn off the Power Switch at the bottom and toy etc.
Warnings about battery WARNING FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO REMOVE THE BATTERY ON YOUR OWN OR DISPOSE OF IT IN FIRE. DO NOT DISASSEMBLE, CRUSH OR PUNCTURE THE BATTERY. How to remove the battery Take off the vacuum cleaning robot from the charger (station) for disassemble this product. Must turn off your vacuum cleaning robot for safety before disassemble. 1. Lay down and invert vacuum cleaning robot and then Remove 2 screws. 2. Disassemble the COVER BATTERY.
3. Disassemble the ASSY BATTERY. 4. Keep finger pushing connector and then disassemble.
Correct disposal of batteries in this product (Applicable in countries with separate battery return systems.) The battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. Do not attempt to remove the battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery.
product specification 93 mm (Height) 355 mm (Length) 355 mm (Width) Main Body 122 mm (Height) 275 mm (Width) 161 mm (Length) Charger 46_ product specification
Classification Electrical Specifications Cleaning Specifications Detail Diameter 355 mm Height 90 mm Weight 3.5 kg Power voltage AC 220-240 V~, 50-60 Hz Charge power consumption 50 W Main unit power consumption 40 W Battery specifications 14.4 V / 2,000 mA Dust bin capacity About 0.
Open Source Announcement The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to: oss.request@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution may be charged.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w’ and `show c’; they could even be mouse-clicks or menu items--whatever suits your program.
a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License.
which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
