User Manual (Windows 7)

24_ Operating the cleaner
Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER
RECHARGING
1. Press the Recharging button.


vacuum cleaner will return to the charger.
2. To stop the robotic vacuum cleaner while it is
returning to the charger, press the (
) button.
3. To test the auto charge function, press the
Recharging button when the robotic vacuum cleaner
is less than 1.5 m from the charger.
You can have the robotic vacuum cleaner return
to the charger to charge the battery by using the
Recharging button.
■
When the robotic vacuum cleaner is operating, press


Recharging button.
Troubleshooting when the robotic vacuum cleaner does not return to the
charger
● Check the installation of the charger

charger cannot guide the robotic vacuum cleaner
to the charger.

robotic vacuum cleaner.

vacuum cleaner to return to the charger.
● Manually charge the robotic vacuum cleaner in the following cases.




where the charger is installed.
Using the main unit
buttons
1.5 m ahead