SR8730 SR8750 SR8751 Vacuum Cleaning Robot user manual This manual is made with 100 % recycled paper. ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register DJ68-00682F(0.0).indd 01 2012.9.
safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your WARNING vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED WARNING CAUTION Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANING ROBOT. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fire, electric shock, or injury: GENERAL • Use only as described in this manual. • Do not operate the vacuum cleaning robot or charger if it has been damaged in any way.
safety information VACUUM CLEANING ROBOT • Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc. • Do not use without a filter in place. When servicing the unit, never put fingers or other objects into the fan chamber in case the unit accidentally turns on. • Do not put any objects into openings. Do not use with any openings blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
contents SAFETY INFORMATION 02 06 07 10 11 Power Related Before Use In Use Cleaning and Maintenance PRODUCT FEATURES 13 ASSEMBLING THE CLEANER 15 Components 16 Name of each part 15 OPERATING THE CLEANER 20 MAINTAIN TOOLS AND FILTERS 30 TROUBLESHOOTING 20 Installing the vacuum cleaning robot 20 Installation order 20 Turning the Power Switch on or off 21 Installing the charger 22 Charging 23 About the Battery 24 Using the vacuum cleaning robot 24 Starting/Stopping Cleaning 25 Recharging 26 Auto Cl
safety information POWER RELATED WARNING WARNING Do not bend the power cord forcefully or place a heavy object on it that could break it. - This may result in fire or electric shock. Make sure to remove any dust or water from the power plug. - Failing to do so may result in a malfunction or electric shock. WARNING Do not pull the power plug by the cord or touch the plug with wet hands. - This may result in fire or electric shock. WARNING Do not use multiple plugs in a single socket.
BEFORE USE CAUTION CAUTION CAUTION CAUTION CAUTION 01 SAFETY INFORMATION CAUTION Before activating the vacuum cleaning robot, make sure that the dust bin is assembled. - If the dust bin is not inserted, vacuum cleaning robot will not operate. Never use vacuum cleaning robot in locations with combustible material such as. - Locations with candles or desk lamps on the floor. - Locations with unattended fires (fire or embers).
CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION Remove small objects or brittle items from the area to be cleaned in advance. - Make sure to clear any objects before cleaning. - Make sure to remove fragile items such as china, glass objects, flowerpots, etc. - Vacuum cleaning robot does not recognize coins, rings or other valuable items such as jewelry. Remove objects scattered on the floor before cleaning. - Vacuum cleaning robot is designed to detect obstacles 5cm away from it.
CAUTION Objects in front of the charger will prevent the vacuum cleaning robot from auto-charging itself. - Clear the area. m 0.5 ut abo m 0.5 ut abo ab ou t1 m WARNING There should be no obstacles and cliffs 0.5m to the left and right and within 1m of the front. .5m ut 0 abo u m t 0.5 abo 01 SAFETY INFORMATION CAUTION Install the charger in a location that can be easily accessed by the vacuum cleaning robot.
IN USE CAUTION You cannot use the vacuum cleaning robot on thick carpets. - This may result in problems with the vacuum cleaning robot. - This may result in damage to carpets. CAUTION Do not use the vacuum cleaning robot on a table or other high locations. - This may result in damage when the unit accidentally drops. CAUTION CAUTION CAUTION WARNING Vacuum cleaning robot may bump into furniture such as chair legs, table legs, thin and long furniture, etc. while operating.
NOTE NOTE Vacuum cleaning Robot cannot completely clean locations that it cannot reach, such as corners, and spaces between sofas and walls. - Please clean these locations occasionally. Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to pick up dust clusters that were formed while cleaning. - In this case, sweep up the dust with another cleaning tool.
WARNING When removing foreign substances, always use the cleaning brush after turning the Power Switch off. - Failing to do so may result in sudden operation of the unit and cause an injury or critical damage to the product. Edge-cleaning side brush Power brush WARNING WARNING WARNING If the power cord is damaged, have it replaced by a qualified service engineer from the customer care center. - Failing to do so may result in fire or electric shock.
product features • What is ceiling shape recognition (Visionary mapping plus™)? This function recognizes the shape of the ceiling using the camera on top to identify the area to be cleaned and determines the best way to pass over and clean every section of the floor. DELICATE CLEANING OF EVERY CORNER Since the vacuum cleaning robot cleans the floor in a sequential way ( ) along the map determined by the ceiling shape recognition function, it cleans every corner of the floor.
AUTO CHARGING When the battery is low, the Vacuum cleaning Robot is automatically guided to the charger to enable it to perform a quick auto charge. EDGE-CLEANING SIDE ROTATING BRUSH The edge-cleaning side rotating brush cleans dust from the edges. DOORSILL CROSSING About 1.5 cm Stair type Vertical type The Vacuum cleaning Robot’s innovative driving system makes it possible for it to cross over doorsills with a height of about 1.5 cm and clean all rooms.
assembling the cleaner COMPONENTS ■ Main Body 02 ASSEMBLING THE CLEANER ■ Charger (Station) ■ Others Components ❈ Option User Manual Cleaning Brush Remote Control / 2 Batteries assembling the cleaner _15 DJ68-00682F(0.0).indd 15 2012.9.
NAME OF EACH PART ■ Main unit Display panel Operating Button Remote Control Sensor Obstacle Sensor Obstacle Sensor Bumper Sensor Front Dust Bin Eject Button Dust Bin Remote Control Sensor Side Cliff Sensor Driving Wheel Side Brush Charge Pin Power Brush Roller Power Brush Cover Cliff Sensor Battery Cover Charge Pin Power Switch Cliff Sensor Driving Wheel Bottom 16_ assembling the cleaner DJ68-00682F(0.0).indd 16 2012.9.
■ Charger (Station) Power Lamp Charge Lamp 02 ASSEMBLING THE CLEANER Vents Charge Pin assembling the cleaner _17 DJ68-00682F(0.0).indd 17 2012.9.
■ Remote Control (Option) Power Recharging Auto Max Spot Directional Buttons Start/Stop (moving backwards is not supported.) Manual ■ Installing the Remote Control Batterise Batteries are not installed in the remote control when purchasing the product. Install the batteries (type AAA) before use. 1 Lift the battery compartment cover at the back of the remote control, while pressing the locking tab. 2 3 Install the batteries into the remote control as shown by the figure below.
■ Display panel 3 1 A 5 B 6 02 ASSEMBLING THE CLEANER 4 2 C 7 DISPLAY PART 1. Battery Level Indicator - Charging: Shows the charging progress in 3 steps. - In Use: Shows the battery charge level. The battery charge level is reduced by each level from FULL while operating. 2. Recharging - This icon turns on when the Vacuum cleaning Robot returns to the charger station to charge its battery. 3.
operating the cleaner INSTALLING THE VACUUM CLEANING ROBOT Installation order 1. Turning the Power Switch on or off To use the vacuum cleaning robot, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the Charger To charge the vacuum cleaning robot, you must first install the charger. Since the battery is discharged when the product is purchased, you must fully charge the battery before use. 3.
Installing the charger Power Lamp Charging Lamp 2. There should be no obstacles and cliffs 0.5m to the left and right and within 1 m of the front. .5m ut 0 abo .5m ut 0 abo 03 OPERATING THE CLEANER 1. Install the charger on a flat surface. ab ou t1 m 3. Install the charger in a location where it can be easily accessed by the vacuum cleaning robot. 4. Arrange the power cord along the wall. 5. When the floor is made of wood, install the charger in the same direction as the grain of the wood.
operating the cleaner Charging When the product is initially purchased, the battery is fully discharged, and you must charge the vacuum cleaning robot manually. Power lamp Charging lamp Turn on the Power Switch at the bottom of the product. 1. After aligning the charge pins of the main unit with the charge pin of the charger station, press the main unit until you hear a Recharging power sound from the charger. - The Charging Lamp turns green. Power lamp Charging lamp 2.
NOTE 03 OPERATING THE CLEANER • When the product is initially purchased, it will take about 120 minutes to fully charge the battery and will run for about 90 minutes. • When charging the battery while the battery is over-heated, the charging time can increase. • Measures to take when charging is not smooth. When the Vacuum cleaning Robot cannot be automatically charged, check the following: - Turn the Power Switch at the bottom of the Vacuum cleaning Robot off and on (Reset).
USING THE VACUUM CLEANING ROBOT Starting/Stopping Cleaning You can run or stop all vacuum cleaning robot functions. ■ Each vacuum cleaning robot function only runs when the Power Switch is turned on. ■ When the robotic vacuum is operating, press the ( ) button to cancel the operation and select a function. Turning the power on or off ❈ Option Turning the power on - Remote control: Press the [Power] button. (Option) - Main unit: Press the ( ) button. - Cleaning mode icons are turned on.
Recharging 03 OPERATING THE CLEANER You can have the Vacuum cleaning Robot return to the charger to charge the battery by using the Recharging button. ■ When the Vacuum cleaning Robot is operating, press the ( ) button to cancel the operation and press the Recharging button. ❈ Option 1. Press the Recharging button. - The main unit icon ( ) is turned on and the Vacuum cleaning Robot will return to the charger. 2. To stop the Vacuum cleaning Robot while it is returning to the charger, press the ( ) button.
Auto Cleaning The Vacuum cleaning Robot will move by itself and automatically clean the house until cleaning is completed once. ■ If cleaning begins when the Vacuum cleaning Robot is docked with the charger station, the time to return to the charger is decreased since the Vacuum cleaning Robot remembers its original position while moving.
Spot Cleaning Main unit button Remote control button (Option) Configuration Sequence About 1.5m About 1.5m 03 OPERATING THE CLEANER You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc. ■ Move the Vacuum cleaning Robot to the location where you want to perform a spot clean. Flash 1. Set the mode. ➧ 2time 2. Cancel the mode. - While cleaning In Spot cleaning mode, the Vacuum cleaning Robot cleans an area with a length of 1.5m and a width of 1.5m.
Max Cleaning The Vacuum cleaning Robot automatically moves and cleans until the battery runs out and the battery level flashes only one level. ■ If cleaning begins when the Vacuum cleaning Robot is docked with the charger station, the time to return to the charger is decreased since the Vacuum cleaning Robot remembers its original position while moving.
Manual Cleaning (Option) Remote control button (Option) Configuration Sequence Flash 1. Set the mode. 2. Cancel the mode. NOTE 03 OPERATING THE CLEANER You can move the Vacuum cleaning Robot to clean a particular location directly by using the remote control. ■ Move the Vacuum cleaning Robot to the location where you want to perform manual cleaning. ■ You can manually clean using the remote control only.
maintain tools and filters CLEANING THE VACUUM CLEANING ROBOT Please keep the cleaning and maintenance methods in mind ■ When the Power Switch is damaged, please contact the service agent so that it does not cause any accidents. ■ Do not use any means or mechanical devices not installed by the manufacturer that could accelerate the deformation of the Vacuum cleaning Robot. ■ Always turn off the power switch at the bottom of the main unit before cleaning the robotic vacuum.
Cleaning the Dust Bin and the Filters Filter 04 MAINTAIN TOOLS AND FILTERS First, empty the dust bin before cleaning it. ■ When separating the dust bin, take care not to spill the dust out of the dust bin. ■ Empty the dust bin in the following cases. 1. When dust has accumulated inside the dust bin. 2. When the suction power suddenly becomes weak. 3. When the noise suddenly increases. Dust Bin Cover 1. Press the Dust Bin Eject (PUSH) button and pull the dust bin to separate the dust bin. 2.
CLEANING THE VACUUM CLEANING ROBOT Cleaning the Power Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. • Because the dust in the dust bin may come out, separate the CAUTION dust bin first before cleaning the power brush. 1. Separate the dust bin by pressing the Dust Bin Eject (PUSH) button. 2. After checking whether there are any foreign substances, press the hook that is fixing the brush cover to separate it. 3.
6. After inserting the 3 tips at the top of the cover, push the other end in until it “clicks” into place. • To prevent the Vacuum cleaning Robot from becoming clogged, be careful not to vacuum tooth picks or cotton swabs. • When removing foreign substances becomes difficult, contact a customer care center. • Because the power brush vacuums the dust on the floor, long strings or hair can become wrapped around the brush. Check and clean the power brush regularly.
Cleaning the Edge-Cleaning Side rotating Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush. 2. Wearing rubber gloves, wrap the side rotating brush with a cloth using hot water for about 10 seconds and wipe it on the cloth. 3. Turning the side rotating brush, repeat the procedures in Step 2. 4.
Cleaning the Driving Wheel 04 MAINTAIN TOOLS AND FILTERS You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic. ■ If the vacuum cleaning robot suddenly starts to zigzag, there may be foreign substances stuck on the driving wheel. 1. When cleaning the driving wheel, place a soft cloth on the floor and flip the main unit, placing it down carefully. 2. Check for foreign substances and remove them using a stick or a pair of blunt nippers if necessary.
troubleshooting CHECKLIST BEFORE SVC CALLS Symptom Vacuum cleaning Robot does not operate at all before cleaning. Checklist Measure to Take • Is the dust bin assembled? • Install the dust bin. • Is the Power Switch turned on? • Turn on the Power Switch. • Is cleaning mode ( display panel turned on? ) in the • Press the ( ) button. (To turn it off, press and hold the ( ) button down for 3 seconds or longer.
Symptom Measure to Take • Check whether the power plug of the charger is plugged correctly into the outlet. 05 TROUBLESHOOTING Vacuum cleaning Robot cannot find the charger. Checklist • If there are any obstacles within a range of about 1m in front of the charger and about 0.5m range to the left and right of the charger, you should remove the obstacles. • If there are any foreign substances on the change pin, wipe them off with a dry towel. troubleshooting _37 DJ68-00682F(0.0).indd 37 2012.9.
TROUBLESHOOTING FOR ERROR CODES ERROR CODE Flash Flash Flash Flash Flash CAUSE SOLUTION • Vacuum cleaning Robot is caught, stuck or trapped while navigating. • Turn off the Power Switch at the bottom and move the Vacuum cleaning Robot to a different location. • A foreign substance (string, paper, toy etc.) is caught in the power brush. • Turn off the Power Switch at the bottom and remove the foreign substance from the power brush. • A foreign substance (string, paper, toy etc.
product specification 90 mm (Height) 355 mm (Length) 355 mm (Width) 275 mm (Width) 161 mm (Length) Main Body Classification Mechanical Specifications Electrical Specifications Cleaning Specifications Charger (Station) Item Detail Diameter 355mm Height 90mm Weight 3.5kg Power voltage AC 220-240V~, 50-60Hz Charge power consumption 50 W Main unit power consumption 40 W Battery specifications 14.4V / 2,000 mA Dust bin capacity About 0.
Open Source Announcement The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to: oss.request@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution may be charged.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.
type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w’ and `show c’; they could even be mouse-clicks or menu items--whatever suits your program.
a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License.
which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site U.K 0330 SAMSUNG (7267864) www.samsung.com SOUTH AFRICA 0860 7267864 (SAMSUNG) www.samsung.com AUSTRALIA 1300 362 603 www.samsung.com HONG KONG (852) 3698-4698 www.samsung.com/hk www.samsung.com/hk_en/ MALAYSIA 1800-88-9999 www.samsung.com SINGAPORE 1800-SAMSUNG (7267864) www.samsung.com Code No. DA68-00682F REV(0.0) DJ68-00682F(0.
