User manual

34_ operating
Weekly Reservation
In this mode, you can schedule the cleaner to start a once-off
cleaning run from the specified time on the specified days of
the week.
■
A scheduled cleaning run is only performed when the cleaner is
docked to the charging station.
Remote Control Configuration Sequence
Standby mode
- In Standby mode, the
scheduled days of the week
are displayed.
Blinks
When there is no reservation
Blinks
When there is a reservation
Decrease
Increase
1. Hold down the Timer/Weekly
button for more than 3
seconds. Press the

or

buttons to set the day of the
week.
- If there is no reservation set
previously, the current day of
the week is displayed.
- If there is no scheduled time,
--:-- is displayed.
Blinks
Blinks
Decrease
Increase
2. Press the Timer/Weekly
button. Press the

or

buttons to set the hour.
❈
If there is a scheduled hour, it
is displayed.
❈
Cleaning Mode
- If there is no reservation set
previously, the cleaning mode
is set to Auto mode. If there
is a reservation, it is set to the
configured mode.
Blinks
Decrease
Increase
3. Press the Timer/Weekly
button.
- The time increases/decreases
by 5 minutes. Press the

or

button to set the minutes.
Mon
Tue
Wed
Thu
Fri
Sat
Sun
~