REFRIGERATOR Model : SR(G)-V57, 569MV, 569LV Model : SR(G)-V52, 519MV, 519LV GREEN SERVICE SRG-V57 SRG-569MV SRG-569LV SRG-V52 SRG-519MV SRG-519LV [NON-CFC] Manual REFRIGERATOR CONTENTS 1. Warning For Safety 2. Product Specifications 3. Electrical Part Specifications & Standard 4. Circuit Diagram 5. Function & Operating Instruction 6. Cool Air Circulation 7. Exploded View And Parts List 8. Disassembling The Freezer Compartment 9. Disassembling Fresh Food Compartment 10.
1. Warning for safety This is to prevent users or other persons from being wounded or injured, by using the present product properly. Be sure to observe these contents for safely. (After reading these contents, please keep in such a safe place as to look up) Contents of caution/warning Contents of indication Represents the contents of prohibition Represents the contents that death Warning or heavy injury of a person is Represents the prohibition of disassembly. foreseen.
Warning Do not put a container filled with water Do not install the refrigerator in the wet Do not insert the power plug with the on the product. place or the place which water wet hand. • If water poured, it cause bad insulation splashes. • May cause electric shock. of the electric parts which may lead to fire or electric shock. • Deterioration of insulation of electric parts may cause electric shock or fire. Do not disassemble, repair or alter.
Caution Do not store too much foodstuffs therein. Do not store narrow and lengthy bottles or foods in a small • Opening of the door may cause pouring over which may inflict multi-purpose room. a wound. • It may hurt you when refrigerator door is opened and closed resulting in falling stuff down. If the hole of the power plug socket is loose, do not insert Do not put bottles or kinds of glass in the freezing room. the power plug. • Freezing of the contents may inflict a wound.
Caution Do not touch the container and the food stuffs of the Do not enter the hand into the bottom surface of the product. freezing room with the wet hand. • Sharp edge may inflict a wound. • It may cause frostbite. Please wipe out foreign materials of the metal option of the If you want to insert the power plug again, please insert it five power plug cleanly. minutes after pulling out of the plug socket. • Use of it as it is may cause fire.
2. Product Specifications NON-CFC Model name (NON-CFC) SRG-V57 SRG-569MV SRG-569LV SRG-V52 Option High Middle Low High SRG-519MV SRG-519LV Middle Type 2-Door Freezer/Refrigerator Power source AC 110V/60Hz, 220V/50Hz, 230~240V/50Hz Freezer Low 120LT (4.2 cu.ft) Capacity Refrigerator 344LT (12.1 cu.ft) 304LT (10.7 cu.ft) Total 464LT (16.3 cu.ft) 424LT (14.9 cu.
Model name (NON-CFC) SRG-V57 SRG-569MV SRG-569LV SRG-V52 SRG-519MV SRG-519LV Option High Middle Low High Middle Low Accessory Inside Parts storage R 2 Slide-out 2 Slide-out 2 Slide-out 2 Slide-out shelves wire shelves shelves wire shelves 1 Tray chilled room 1 vegetable ware 1 Guide vegetable Interior lamp Movable caster Angle adjustment 6 2 (Refrigerator), 1 (Freezer) 2 (Rear), 2 (Front) 2 Legs (Front) Samsung Electronics
CFC Model name (CFC) SR-V57 SR-569MV SR-569LV SR-V52 SR-519MV SR-519LV Option High Middle Low High Middle Low Type 2-Door Freezer/Refrigerator Power soruce 115V/60Hz, 220V/50, 60Hz, 230~240V/50Hz Freezer 120LT (4.2 cu.ft) Capacity Refrigerator 344LT (12.1 cu.ft) 304LT (10.7 cu.ft) Total 464LT (16.3 cu.ft) 424LT (14.9 cu.
Model name (CFC) SR-V57 SR-569MV SR-569LV SR-V52 SR-519MV SR-519LV Option High Middle Low High Middle Low Accessory Parts Inside storage R 2 Slide-out 2 Slide-out 2 Slide-out 2 Slide-out shelves wire shelves shelves wire shelves 1 Tray chilled room 1 vegetable ware 1 Guide vegetable Interior lamp Movable caster Angle adjustment 8 2 (Refrigerator), 1 (Freezer) 2 (Rear), 2 (Front) 2 Legs (Front) Samsung Electronics
5. Function & Operating Instruction 5-1 Product Dimension 1367.4 10 10 695.5 605.5 740 10 79 11 552 44.5 8 A B 70 11 12 MODEL A B SR(G)-V52, 519MV, 519LV 1703.5 1062.5 SR(G)-V57, 569MV, 569LV 1791.5 1150.
5-2 Identifying and disassembling the parts To remove bio deodorizer To remove shelves in the freezer compartment • While pushing the front end knob of the bio deodorizer, pull it downward to disengage. • First remove the icemaking molds. Tilt the shell up at front, then lift it up pull it out of the tracks. To remove shelves in the fresh food compartment • Hold the shelf by the front and pull it forward ot of the rack.
5-3 Circuit diagram of the circulation of coolant gas COMPRESSOR Æ Æ SUB CONDENSER Æ R-EVAPORATOR Æ CLUSTER PIPE Æ ACCUMULATOR Æ SUCTION PIPE Æ SUCTION PIPE HOT PIPEÆ DRYER Æ CAPILLARY TUBE COMPRESSOR CLUSTER PIPE ACCUMULATOR R-EVAPORATOR CAPILLARY TUBE HOP PIPE COMP.
8. Disassembling the freezer compartment 8-1 Replacing light bulb in the freezer compartment 1. Push the knob on the light cover as shown ( 1 ) and remove the cover downward ( 2 ). 2 1 2. Replace the bulb (Before replacing, check the voltage and current of the bulb. Use rated bulbs only.) 8-2 Disassembling temperature control and the cooling system 1. Before disassembling, first remove all shelves and food from the freezer compartment. 2. Remove two screws on the front end of the bulb cover. 3.
4. Unscrew the cap screws using a driver(–) or an appropriate tool, remove two screws on the cooling system cover, then disengage five mounting hooks. 5. Disassemble the wire housing on the upper right corner of the cooling system cover. 6. Remove two screws on the cover. (Caution : Keep screws or foreign substances entering from the cold air passage because it could cause malfunctioning of the temperature control.) 7.
9. Disassembling fresh food compartment 1. Remove the super fresh compartment cover and its shelf. 1 • Lift up the cover, push the cover (as shown) until the mounting hook ( 1 ) disengages, then disengage the other mounting hook ( 2 ) and pull out the 2 cover. • Pull the shelf forward until it stops, then lift it up and pull it out. 2. Remove the shelves from the fresh food compartment. • First remove food from the compartment. With shelf front raised slightly, pull it forward to disengage. 3.
5. Remove the two screws holding the damper cover in place. 6. Pull the lower part of the damper cover together with the insulation material as shown to disengage the hooks. 7. Disconnect wire connection on the right side of the damper cover. 8. Specifications for damper insulation assembly EPS.
10. Assembly of mechanic compartment in the refrigerator 1. Remove the screws securing the mechanic compartment cover of the back bottom of the refrigerator 2.
11. Disassembling and assembling the electrical equipment box 1. Unplug the refrigerator. 2. Remove the screw using a driver (–) and detach the electrical equipment box. 3.
4. Circuit Diagram 4-1 [110V/60Hz, 115V/60Hz] [SR(G)-V57, 569MV, 569LV, SR(G)-V52, 519MV, 519MV] GRY YEL BLK F-TEMP CONTROL L 3 M 1 2 L L R/LAMP WHT BRN F/LAMP PNK BIMETAL 4 DEFROST-TIMER RED TEMP.
12. Troubleshooting 12-1 The refrigerator does not operate Is the interior light on when the door switch is pushed? No at the wall outlet. Yes Does the compressor operate? Make sure the refrigerator is plugged in Yes No Make sure that the thermometer in the freezer compartment is electrically connected. No Replace the defective part Yes Check the defrost timer No If the fan operates when you push the door switch, it is normal (Replace if it is defective) Yes Yes Check the P.T.C.
12-2 Defrosting mechanism does not work Check that the defrost timer operates properly No Replace the defrost timer Yes Check the temperature fuse No Replace the temperature fuse Yes Check the bimetal thermometer No Replace the bimetal thermometer Yes Check the defrost heater No Replace the defrost heater 12-3 Defrosting mechanism does not work Does the cooling fan operate? No • Check the cooling fan motor • Check the door switch Yes Is the freezer defrosted normally? No • Defrost timer •
12-4 Trouble check for the cooling cycle Symptom Cause Suggestions • The EVAP cools down and warms again. • The condenser warms in proportion as the EVAP cools. • The process continues to repeat. Moisture in the refrigerant causes the malfunction. Replace the refrigerant • The condenser is cold. • The EVAP is not cold. • The temperature of the compressor is high. Foreign substances hamper the cooling cycle.
12-5 Diagnosing the main components Components Diagnosing methods and criteria • Use the tester to measure the Compressor resistance. – Bring the component to cool down completely before measuring. • Use the tester to measure the P.T.C Relay resistance. – Bring the component to cool down completely before measuring. • Use the tester to measure the Condenser Overload relay resistance. – Bring the component to cool down completely before measuring. • Use the tester to measure the resistance.
7.
SRG-V57 SR-V57 OPTION (SRG-V52) (SR-V52) NO NON-CFC DESCRIPTION CFC Q ’ TY SPECIFICATION REMARKS H M L CODE-NO 1 DA67-10410D CASE-THERMO, FRE ASS’Y 110V/60Hz 1SET DA67-10410B “ 220V/50, 60Hz 1SET DA67-10410C “ 240V/50Hz 1SET 1-1 DA67-10119 CASE-THERMO, FRE ABS 1 1-2 DA63-10337C COVER-LAMP, FRE MIPS 1 1-3 DA47-10107F THERMOSTAT PFN 174S O5B 1 1-4 DA66-30122B LEVER-THERMO, FRE PC/ABS 1 1-5 DA47-40112L LAMP-HOLDER E14 1 1-6 4713-000178 LAMP 110V/15W 1 4713-
SRG-V57 SR-V57 OPTION (SRG-V52) (SR-V52) NO NON-CFC DESCRIPTION CFC Q ’ TY SPECIFICATION REMARKS H M L CODE-NO 18 7-3 DA63-10364A COVER-MOTOR, FAN P.P 1 7-4 DA63-40119A GROMMET-FAN, MOTOR NBR 2 7-5 6002-000224 SCREW-TAP TH2, 4X12 2 7-6 DA31-20002A FAN 7-7 DA61-20128C SPRING-FAN STS 27 ID7.
7-2 Refrigeration room 2 4 3 12 2-1 2-2 11 2-3 5 9-5 14 9-6 9-4 1 5-3 9-3 9-2 9-1 9 13 5-2 5-1 5 9-11 9-9 10 9-7 9-8 8 6-3 8-1 6 6-1 7-3 7-2 7-1 6-2 7 15 9-5 9-6 17-2 6-3 9-3 17-1 16 16-1 16-2 17 9-9 Samsung Electronics 19
NO SRG-V57 SR-V57 (SRG-V52) (SR-V52) NON-CFC CFC OPTION DESCRIPTION Q’TY SPECIFICATION REMARKS H M L CODE-NO 1 DA63-10238A COVER CHILLED-ROOM ASS’Y HIPS + P.P 1SET 2 DA67-40286A TRAY CHILLED-ROOM ASS’Y HIPS 1SET 2-1 DA67-40285A TRAY CHILLED ROOM GPPS 1 2-2 DA66-10104A ROLLER FREE POM 4 2-3 DA71-20145A FIXER ROLLER NY-66 2 3 DA63-10461B CAP-PURIFIER ABS 87068 B LF.
NO SRG-V57 SR-V57 (SRG-V52) (SR-V52) NON-CFC CFC OPTION DESCRIPTION Q’TY SPECIFICATION REMARKS H M L CODE-NO 9-7 DA31-20124D BLADE-DAMPER(A) HIPS 1 – – 9-8 DA31-20124C BLADE-DAMPER(B) HIPS 1 – – 9-9 DA47-40114C LAMP-HOLDER 250V/1A 9-10 DA60-40104B WASHER-PLAIN T1.
7-3 Cabinet Parts & Unit 18 20 19 14 13 15 16 21 25 26 1 27 17 22 26-1 23 2 26-2 24 3 28 4 32 29 31 34 35 30 33 5 6 36 37 38 41 7 8 39 40 9 12 10 11 22 Samsung Electronics
NO SRG-V57 SR-V57 (SRG-V52) (SR-V52) NON-CFC CFC OPTION DESCRIPTION Q ’ TY SPECIFICATION REMARKS H M L CODE-NO 1 DA90-10172E ASS’Y-CABI, FOAM 110V 1SET DA90-10172C “ 220V 1SET DA90-10172D “ 240V 1SET 2 DA63-10399A COVER-HINGE, UPP HIPS 1 3 DA61-10151A HINGE-UPP SHP1 T3.2 1 4 DA63-50145A SHIM-HINGE UPP RD-PVC T1.0 1 5 DA60-10004A SCREW-TAP PH M5 L10 1 6 DA67-30218B CAP-SCREW P.P 1 7 DA34-10122C SWITCH-DOOR 250V/0.
NO SRG-V57 SR-V57 (SRG-V52) (SR-V52) NON-CFC CFC OPTION DESCRIPTION Q ’ TY SPECIFICATION REMARKS H M L CODE-NO 26-1 DA63-10722A COVER-RELAY NORYL 1 SD362C ONLY 26-2 DA65-20113A CLAMP-RELAY COVER STC5 1 SD362C ONLY 27 DA73-10314B PIPE-SUB, COND ASS’Y 28 DA63-40128A GROMMET-SUB, COND NR 2 29 DA60-10105A SCREW-TAPPING PH 4X20 2 30 DA65-20101A CLAMP-COMP STC5 T0.6 2 31 DA67-40176B TRAY-DRAIN, WATER ASS’Y P.P 32 DA73-30102A DRYER CU O, D18.
7-4 Door parts 1-2 3 1-1 1 1-3 4 6 1-4 1-5 1-6 3 2-1 2-2 4 2 5 4 2-4 2-5 2-3 Samsung Electronics 25
NO SRG-V57 SR-V57 (SRG-V52) (SR-V52) NON-CFC CFC OPTION DESCRIPTION Q’TY SPECIFICATION REMARKS H M L CODE-NO 1 DA91-10250A ASS’Y FOAM DOOR FRE 1 (DA91-10250C) 1-1 DA70-10282A PLATE DOOR FRE CR 1 1-2 DA72-20183A PANEL-DOOR FREE ABS+SAN 1 1-3 DA68-50118B INLAY-MASCOT 1 OPTION (DA68-50118T) 1-4 DA71-40119A STOPPER DOOR FRE POM 1 1-5 DA71-40133A STOPPER DOOR. C SCP1 T2.0 1 1-6 6001-000061 SCREW.
13. Specifications of Package (Export Model) Door, Inside storage [OPTION : HIGH, MID] Tape: W50x100(2EA) [OPTION : LOW] Tape: W50x100(2EA) Tape:W50x150 FOAM-PE: T17xw50x175 Tape:W50x150 FOAM-PE: T17xw50x175 FOAM-PE: T5xW40xL60 (4EA) Tape: W50x100(6EA) Tape : W50x100(6EA) FOAM-PE: T17xw50x175 FOAM-PE: T17xw50x175 Tape:W50x150 Tape:W50x150 Cabinet CUSHION:3EA Tape : W50XL150 Tape:W50XL100 P.
3.
Overload- Model protector 4TM444 4TM308 4TM232 4TM419 4TM293 4TM232 NHBYY-53 PHBYY-53 SHBYY-53 NHBYY-53 SHBYY-53 SHBYY-53 68±9˚C Close Temp. Open Temp. Condenser 115±5˚C 125±5˚C 135±5˚C 120±5˚C 135±5˚C 135±5˚C Starting 125µF/125VAC – – 100µF/125VAC – – Running 12.0µF/250VAC 5µF/350VAC 12.
6. Cool Air Circulation • Cold air generated from the cooling system is distributed to the freezer compartment and the Bio deodorizer fresh food compartment by the air circulation fan. Cold air suction • In the freezer compartment, cold air is distributed to the compartment as well as to the shelves the freezer compartment by cold air shower. • Cold air that comes out of the freezer compartment is absorbed back to the lower part Freezer compartment from the cold air exhaust port.