Specifications

254  Integrated Payment Appendix SPS 1000 Operation Manual
DataTran Operation Menu
1. Choose
DATATRAN
OPERATION from
the X-Mode menu.
2. Review the
explanations that
follow and select
the appropriate
operation.
DATATRAN OPERATION L1
1. INITAILIZE EFT
2. OPEN BATCH
3. CLOSE CURRENT BATCH
4. CLOSE BATCH WITH DEBIT
5. CHANGE BATCH NUMBER
6. ISSUE LOCAL TOTAL
7. ISSUE LOCAL TRANSACTION
8. ISSUE LOCAL BATCH STATUS
9. ENABLE DIAL IN LOAD
10.ENABLE DIAL OUT LOAD
11.GRATUITY ENTRY
12 INITIALIZE PINPAD
13 GET GIFT CARD BALANCE
t ESC Y/N ENTER PAGE UP/DN 
Initialize EFT
Select Initialize EFT to verify communications, software versions and installed
networks.
DATE 5/24/2004 THU TIME 16:15
** LIST INSTALLED NETWORRKS **
CHK DEN --- --- VER:3.89
OFF ON OFF OFF
EMPLOYEE1 NO.000019 REG 01
Change Batch Number
The change batch number command is used to assign a new batch number to an
existing batch. It is used with certain credit card processors to rectify settlement
problems. It is used infrequently. (Attempt to change batch number will be denied if
bank does not allow the feature.)
List of Installed Networks
Status of Installed
Software Version