Specifications
16 Display SPS 1000 Operation Manual
MULTIPLICATION LIMIT
EXCEEDED
The maximum digits for multiplication (set in general function
options) has been exceeded.
NEGATIVE
This sale has gone negative. Negative sales are not allowed.
NO CHECK #
Can not find this guest check number.
NO DATA
PLU can not be found (does not appear in Register Mode).
NO DRAWER!
The employee currently signed on is not assigned to a drawer, and is
not allowed to perform cash sales, or drawer is no longer attached
and is required in order to continue.
NO FOOD STAMP AMOUNT
The food stamp subtotal must be displayed before food stamps can
be tendered.
NO FUNCTION KEY
The selected key (when promped to select a function key) is not a
function key.
NO MANUAL ENTRY
Manual entry is not allowed (scale function).
NO PAPER
Slip printer is out of paper.
NO PLU!
The number entered is not a valid PLU. This message will also
appear if a PLU number “built” using modifier keys recalls an
invalid PLU number.
NO PROGRAMMABLE KEY
There is no programming on the key.
NONADD# REQUIRED
This operation requires the entry of a Non-Add number.
NOT DISCOUNTABLE
The preceding entry is not discountable.
NOT PROGRAMMED!
This key has not been programmed.
NOT READY!
Remote printer is not ready.
NOT ZERO
Displayed when trying to delete a PLU which still has sales counts
and amounts. PLU must first be reset in Z Mode.
OFF LINE!
IRC communications have gone off line.
OPEN DRAWER
The register has been programmed not to operate with the cash
drawer open.
OVERRIDE NOT ALLOWED
X-Mode override is not allowed.
OVER WEIGHT
The weight on the scale exceeds the capacity of the scale.
P/BAL REQUIRED!
This register has been programmed to require a previous balance
entry.
PAPER END
The guest check printer has reached the end of the form, or the
Receipt/Journal paper is at, or near, the end of its roll.
PRICE LEVEL MISMATCH
PLU does not have the selected price level programmed.
PRINTER OFF LINE
A printer is turned off.
RANGE OVER
The number entered is out of range.
REMOVE PAPER
Validation is complete and the form must now be removed.