Specifications

SPS 1000 Operation Manual Reports & Balancing  203
8. After selecting a report, the Z-REPORT OPTIONS screen displays.
Z-REPORT OPTIONS
REPORT#: 1 FINANCIAL
1. REPORT TYPE: DAILY (Z1)8
2. IRC OPTIONS IRC ALL8
3. REPORT OUTPUT: PRINT8
ESC ENTER  DONE:GENERATE REPORT
9. Press the  or  keys to select a field.
10. The arrow indicates that the selections for the field are made from a pop-up window.
Press ENTER to open the selection window.
11. Press the  or  keys to make your choice, then press ENTER to close the pop-up
window. Your new choice is displayed.
12. After completing selections, press DONE to generate the report, or press ESC to return
to the X-REPORTS screen.
13. If the system option "CONFIRM PRINTING BEFORE RESETTING TOTALS ON Z" is
selected, then the following message will display upon completion of each Z report.
CLICK ON THE ARROW TO
SELECT THE REPORT TYPE.
THE NUMBER OF REPORT
LEVELS (X2-X5) VARIES
BY MEMORY ALLOCATION
OPTIONS SELECTED ON
THIS SCREEN ARE SAVED
FOR THE NEXT TIME THE
SAME REPORT IS TAKEN
CLICK ON THE ARROW TO SELECT
STANDALONE, IRC ALL, OR IRC
SELECTED. IF IRC SELECTED IS
CHOSEN, THE REGISTER SELECTION
SCREEN DISPLAYS.
CHOOSE PRINT OR
DISPLAY FOR THE
REPORT OUTPUT
Z REPORT COMPLETED
SUCCESSFULLY.
DO YOU WISH TO RESET
TOTALS?
PRESS DONE TO RESET AND
END THIS REPORT
PRESS ESC TO EXIT REPORT
WITHOUT RESETTING TOTALS