Specifications

14  Display SPS 1000 Operation Manual
Display Messages
AGE RESTRICTION
The item cannot be registered due to age verification.
AMOUNT REQUIRED
This operation requires an amount entry.
AVAILABLE ONLY IN
CHECK
A guest check must be opened for this operation.
BAD VALUE
The number entered is wrong.
BUFFER EMPTY
No information in the buffer.
BUFFER FULL
The buffer for soft check, hard check, or buffered receipt has
reached capacity. For hard checks, the operator must press the
SERVICE key to print the items and clear the buffer. The operator
must then pick up the previous balance again in order to continue.
In a soft check environment, this message will appear when the
check has reached capacity (maximum lines stored). The register
will maintain the correct balance, but does not print additional items
and will give the BUFFER FULL error after each additional item.
BUSY
Destination register is busy (pre poll memory is in use). Requires a
clear command from the PC or register.
CASH DECLARATION
REQUIRED
Cash declaration has been programmed as compulsory, and must
first be performed before reports may be generated.
CASH-IN-DRAWER LIMIT
EXCEEDED
The programmed Cash-In-Drawer limit has been exceeded.
CHECK KEY POSITION
The key lock is in the wrong position.
CHECK TRACKING ERROR
The register is not able to communicate with the check track master
register, or the register is not set in system options.
CHECK# IS ASSIGNED
AUTO
The operator has attempted to open a new guest check by assigning
a check number. The register has been programmed to generate its
own check numbers.
CHECK# REQUIRED!
This register has been programmed to require a check number entry
to begin a guest check transaction. An existing guest check must be
recalled, or a new one started.
CONDIMENT REQUIRED!
This PLU has been programmed to require a condiment entry.
CRC ERROR
An error has occurred in the block check sum while transferring
data in IRC mode.
DUPLICATE!
This check already exists. May also apply to secret code
programming.