Specifications

SPS-2000 Program Manual v1.39 Software Installation & SD Memory Utilities  39
6. The PLEASE WAIT message displays as images are loading. After successful transfer, the new
images will display. Note that when the image file exceeds 10 images, additional image pages are
used. Touch the PAGE UP/PAGE DN keys to view all available images.
7. Click OK to close the Button Image Select dialog.
Screen Saver Logo
When the screen saver is engaged, the default SAM4s logo moves in a pattern across the screen (this is the
FLOATING Logo.) This logo can be replaced with a custom logo. Name the custom logo “logo.jpg”. The
maximum logo size is 600 (wide) X 400 (height). (logo.jpg works best if under 100K in size.)
Beginning with software version 2.01n, a second screen saver option is available. Set SYSTEM
OPTION/GENERAL FUNCTION OPTION #58 to ROTATING to allow up to fifty images to sequence on
the screen. These images must be named “logo##.jpg” where ## is 01 through 50.
Follow these steps to implement a custom logo.
1. Make a “logo.jpg” file for a FLOATING logo or “logo##.jpg” files for ROTATING logos.
NOTE: files must be lower case “logo.jpg” not “LOGO.jpg”
2. Make a folder on the SD card named \image. (This is the same folder that is used to contain key
images.)
3. Copy the logo files to this directory.
4. Move the SD card to the SPS-2000.
5. From the SPS-2000 S Mode menu, choose Key Relocation, then Image, then Copy and confirm.
6. The new image(s) will replace the SAM4s logo as the screen saver.