SPH-i700 Series Portable Tri-Mode Telephone User’s Guide Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating thereto (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Samsung Telecommunications America (STA), Inc. Headquarters: 1130 E. Arapaho Road Richardson, TX 75081 Tel: 972-761-7000 Fax: 972-761-7001 Customer Care Center: 1601 E. Plano Parkway Suite 150 Plano, TX 75047 Tel: 888-987-HELP (4357) Fax: 972-761-7501 Internet Address: http://www.samsungtelecom.com ©2002-2003 Samsung Telecommunications America, Inc. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Samsung Telecommunications America, Inc.
Table of Contents Chapter 1 - Getting Started ......................13 Turning the i700 On ...................................................... 14 Entering the Owners Information .........................................14 Setting up Voicemail ..................................................... 15 Contacting Customer Care ............................................ 15 Chapter 2 - Understanding your Phone ........17 Front View of the I700 ..................................................
Chapter 3 - Personal Settings ..................29 Personal Settings .......................................................... 30 Buttons ................................................................................31 Input ....................................................................................32 Menus ..................................................................................37 Password .............................................................................39 Phone ...........
Chapter 6 - Security Settings ...................59 Accessing the Security Options .................................... 60 Special Numbers ..................................................................60 Locking the i700 ..................................................................61 Unlocking the i700 ...............................................................61 Chapter 7 - Understanding Roaming ..........63 Roaming .......................................................................
Chapter 9 - Call Logs .............................77 Call Logs ....................................................................... 78 Making a Call from the Call Log ...........................................78 Call Log Options ..................................................................79 Creating a New Contact from the Call Log ...........................79 Deleting Call Log Entries ......................................................80 Sending a SMS Message from a Call Log Entry ...........
Chapter 12 - Calendar ............................91 Today ............................................................................ 92 Date and Time Settings ........................................................92 Scheduling an Alarm ............................................................93 Owner Information ...............................................................93 Calendar ....................................................................... 94 Scheduling an Appointment .............
Note Options ......................................................................107 Chapter 14 - ActiveSync ....................... 109 ActiveSync .................................................................. 110 Installing the ActiveSync Software .....................................110 Creating a New Partnership ...............................................111 Performing ActiveSync using IR ........................................112 Scheduling an ActiveSync ....................................
Games ...............................................................................127 Calculator ...........................................................................128 Infrared Receive .................................................................129 Chapter 17 - Managing Applications ........ 131 Application Management ............................................ 132 Installing New Applications ................................................132 Deleting an Application ......................
Chapter 20 - Windows Media Player ........ 155 Media Player ............................................................... 156 Launching the Media Player ...............................................156 Media Player Controls ........................................................156 Loading Media Player Files ................................................157 Chapter 21 - Safety and Warranty ............ 159 Safety Information ...................................................... 160 Warranty .......
Chapter 1 - Getting Started The following topics are discussed in this Chapter: • Turning the Phone On • Entering the Owner Information • Setting up Voicemail • Contacting Customer Care
Turning the i700 On To power up the i700, press located on the upper right side of the phone. Follow the steps on the display screen to align or calibrate the device. This procedure insures that when you press the screen using the stylus, the desired action occurs properly. Entering the Owners Information The owners information identifies the owner or user of the device. Name, company, address, phone number, email address, and note information fields are available. To enter the owners information: 1.
Setting up Voicemail All unanswered calls to your phone are sent to voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your phone is activated. To set up voicemail: 1. Press the button located on the bottom front of the phone to display the phone screen. 2. Tap and hold to dial the voicemail system. Note: One has been automatically reserved in speed dial for your voicemail.
Chapter 1 - Getting Started 16
Chapter 2 - Understanding your Phone The following topics are discussed in this Chapter: • Front View of the i700 • Viewing the Phone Screen Icons • Features of the i700 • Battery and Charger Accessories • Displaying your Phone Number • Making/Answering Calls
Front View of the I700 Chapter 2 - Understanding your Phone 18
Viewing the Phone Screen Icons Icon Definition This icon represents the signal strength. The more bars displayed, the better the signal. This icon is displayed when the phone is Off or cannot find service. Indicates that GPS (Global Positioning System) is active. Indicates that GPS is inactive. Indicates that the ringer is On. Indicates that the ringer is Off. Indicates that the vibrate function is turned On. Indicates that the i700 supports the 1X high speed data transfer protocol.
Indicates missed calls. If you tap the icon a window is displayed indicating the amount of call missed. It also gives you the ability to view the missed call information. Indicates that a new voicemail messages. If you tap this icon a window is displayed that allows you to listen to new voicemail messages. Indicates that a new SMS text message is available. If you tap this icon, a window is displayed that allows you to access the Inbox.
Features of the i700 The i700 uses the Microsoft Windows CE operating system, which supports thousands of applications. Using the ActiveSync operation, you can keep your PC and your i700 synchronized at all times.
Battery and Charger Accessories Your i700 comes with a Li-Ion battery, charger, and headset. It is very important to use only Samsung approved accessories to avoid damage to your phone. Battery Capacity Your phone is equipped with a Lithium Ion (Li-Ion) battery. The battery can be recharged before it is fully drained without causing battery damage. When the battery becomes low, a warning window is displayed and the unit automatically turns off the LCD.
Installing the Battery 1. Place the battery on the back of the phone, making sure that the plastic tabs are aligned with the corresponding holes in the phone. 2. Gently push the battery up until it snaps into place.
Removing the Battery 1. Push the battery release latch and slide the battery down from the phone.
Charging the Battery Your PCS Phone comes with a rechargeable battery. You should charge the battery as soon as possible so you can begin using your phone. Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off and you’ll lose everything you were just working on. For a quick check of your phone’s battery level, tap the time located in the upper right corner of the screen.
Automatic Ringer Mode When Charging When the phone is in Vibrate mode and is placed in the craddle or plugged into the charger, it automatically switches to a ringer mode. This is done to allow you to hear any incoming calls while the unit is charging. Displaying your Phone Number To display your phone number: 1. Press to display the phone screen. 2. Tap Tools and select Options. 3. The Settings screen is displayed. Your phone number is displayed at the top of the screen. 4. Tap to exit.
Note: Always use the stylus when touching the screen to avoid scratching or damage caused by other instruments. 3. Tap . One Handed Dialing One handed dialing allows you to make a call while using just one hand. To make a call: 1. Press located on the side of the phone. 2. Press the Contacts 3. Press the OK/Navigation key up or down to select the desired address book entry. 4. Press the OK/Navigation key to display the entry information and phone number. 5.
Chapter 2 - Understanding your Phone 28
Chapter 3 - Personal Settings The following topics are discussed in this Chapter: • Buttons • Input • Menus • Password • Phone • Sounds & Notifications
Personal Settings The personal settings allow you to set the following options on your i700: • Buttons • Input • Menus • Password • Phone • Sounds and Notifications • Today • Owner Information These settings allow you to control the look and feel of the i700. To access the Personal Settings: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab.
Buttons The Buttons setting allows you to configure which application launches when the record, contacts, or calendar buttons are pressed. The following table gives you the default settings and available applications for each button: To access the Button settings: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap the Buttons icon.
(Same list as above) Contacts (default) (Same list as above) Calendar (default) Input There are four different character input methods available. They are: • Block Recognizer • Keyboard • Letter Recognizer • Transcriber Each of these methods allow you to input alphanumeric characters and symbols into the i700. In addition to the input methods, there is Word Completion and other options associated with the input selected. To access the Input settings: 1.
Block Recognizer This input method uses the traditional writing area box split in the middle. The left side is used to write letters and the right side is for number entry. Symbols and common functions are located in other smaller boxes located to the right of the writing box area. There are no options associated with this type of input method. Keyboard This input method displays an on-screen keyboard that can be used to input characters by tapping the screen using the stylus.
Letter Recognizer This option allows you to enter text using your own handwriting. The screen is divided into three different areas. A capitol letter area, small letter area, and a number area. Characters are entered by printing letters in each area. The character is then analyzed and typed on the screen automatically.
There are also some transcriber recognizer options. They are: • Add space after - Automatically adds a space after each writing. • Separate letters mode • Speed of recognition vs Quality - Determines the speed at which the writing sample is analyzed. The faster the setting the less likely to get all words correct. Better quality is achieved with longer processing. • Recognition start time - Allows you to set the time of recognition between new writings.
Options The options settings only apply when writing or recording is supported.
- 150% - 200% - 300% • Default zoom level for typing - 75% - 100% - 150% - 200% - 300% • Capitalize the first letter of a sentence • Scroll upon reaching the last line Menus There are two menus available in the i700 menu options. They are: • Start Menu • New Menu The Start menu options allow you to configure what is displayed when you tap the Start menu located in the upper left corner of the screen.
Start Menu To access the Start menu: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap the Menus icon. 5. Tap the Start Menu tab. 6. Check the items that you want to be displayed in the Start menu. Items that are not checked are displayed in the Programs menu. 7. Press to exit. New Menu To access the New menu options: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4.
Password The password option allows you to enable or disable a password. The available settings are: • No password - This setting disables the password. • Simple 4-digit password - Allows you to set a four digit password using the on-screen keypad. • Strong alphanumeric password - Allows you to enter a password that contains letters, numbers, or both. When a password is configured, there is a “prompt if device unused” option that allows a length of time range from 0 minutes - 24 hours.
8. Confirm the password setting by tapping Yes in the Password dialog box. Phone The phone options displays all the available options for the phone. The options are divided into the following tabs: • Phone - Allows you to configure a voicemail phone number. View your existing phone number. Select the desired sounds associated with the phone. Volume notification settings are also included. • Roam - Allows you to configure the roaming settings associated with your carrier.
Phone Tab These options allow you to configure several different settings that are specific to the phone including: • Changing the Voicemail Dialup Number • System Volume • Notifications • System Sounds Voicemail settings To access the voicemail settings: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap the Phone icon. 5. Tap the Phone tab. 6. The number to call your voicemail is displayed in the Voicemail box.
Sounds These options allow you to configure the sounds for the i700. These include the ring type, ring tone, keypad sounds, and other sound settings. To access the sound settings: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap the Phone icon. 5. Tap the Phone tab. 6. Tap the Ring Type drop down arrow and select one of the following ring types: 7.
• OldPhone • RoaringGuitar • Trio • Welcome Note: To hear the ring tone, use the player controls located to the right of the ring tone box. Tap the arrow to play the tone and then tap the square to stop. 8. Tap the Keypad drop down arrow and select: 9. • Short Tones - When the on-screen keypad for the phone is tapped, a short tone is played. • Long Tones - When the on-screen keypad for the phone is tapped, a long tone is played.
3. Tap the Personal tab. 4. Tap the Phone icon. 5. Tap the Phone tab. 6. Tap the Other Settings box. 7. Tap the Volume tab. 8. Tap the slider and select the desired System volume between Silent and Loud. 9. Tap the desired check boxes under “Enable sounds for”. Note: Some choices are greyed out unless the proper check box is selected above the item. 10. Tap the Notifications tab. 11. Tap the event drop down arrow and select the desired event. 12.
Chapter 4 - Windows Applications and Text Entry The following topics are discussed in this Chapter: • Navigating your PDA • Shortcuts • Menu Options
Navigating your PDA Your i700 provides the power of a personal computer with exceptional portability and integration. Unlocking its power begins with customizing the i700 so that it becomes an extension of your desktop or laptop computer. The i700 is Pocket PC 2002 Windows Powered, providing the power and familiarity of Windows that you are used to. Pocket versions of popular Microsoft applications such as Word, Excel, Windows Media Player® and Outlook® eliminate the need to learn new software.
Shortcuts New Command The New command located in the bottom left side of the screen allows you to create a new: • Appointment • Contact • E-mail Message • Excel Workbook • Note • Task • Word Document To access the new command: 1. Tap New located in the bottom left corner of the screen. 2. Select any of the choices to launch the application. Time & Appointments To view the next upcoming appointment and battery indicator without launching the calendar or today screen: 1.
Chapter 4 - Windows Applications and Text Entry 48
Chapter 5 - Phone Settings The following topics are discussed in this Chapter: • Setting the Desired Volume Level • Tone Length • Alerts Sounds & Notifications • Turning the Ringer Off
Setting the Volume Levels There are several different volume levels that can be configured on the i700. They are: • Voice Volume • Record Volume • Ring Volume • System Volume Voice Volume The voice volume determines the volume setting of the incoming caller. This setting can be set quickly by pressing the up or down volume button located on the side of the phone. To access the voice volume settings in the phone: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3.
Record Volume The record volume determines the recording levels for voice memo’s, notes, or recorded conversations. The higher the setting, the more sensitive the microphone. There is also a 20db gain setting that allows an extra sensitive level for recording. To access the record volume settings: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the System tab. 4. Tap Volume. 5. Using the stylus, tap the desired level on the slider located under Record Volume.
Ring Volume The ring volume determines the volume setting for the ringer associated with the phone. You can also set the ringer silent if needed to avoid disturbing others in a quiet setting. To access the ring volume settings: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the System tab. 4. Tap Volume. 5. Using the stylus, tap the desired level on the slider located under Ring Volume. 6. Tap to exit.
System Volume The system volume determines the volume settings for the operating system installed on the i700. A beep or other sound is heard while navigating through the menus. To access the system volume setting: setting. To access the ring volume settings: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap Sounds & Notifications. 5. Using the stylus, tap the desired level on the slider located under System Volume. 6. Tap to exit.
Setting the Tone Length When dialing a phone number, tones are emitted each time a key is tapped. These tones can be set up to be short, long, or turned off. In some cases, longer tone lengths may be required for accessing automated systems or voicemail. To set the tone length: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap Phone. 5. Tap the drop down arrow next to Keypad and select Short Tones, Long Tones, or Off. 6. Tap to exit.
Alert Sounds & Notifications Alert sounds can be configured for the following events: • ActiveSync: Begin sync • ActiveSync: End sync • Beam: Autoreceive • Inbox: New e-mail message • Inbox New SMS message • MSN Messenger: Contact online • MSN Messenger: New message • Phone: Incoming call • Phone: Missed call • Phone: Voice mail • Reminders Selecting a Ringer for Incoming, Missed, or Voice Calls To select a ringer for incoming calls: 1. Tap Start located in the upper left corner of the screen. 2.
7. 8. Tap the drop down arrow next to Ring Type and select one of the following: • Ring • Increasing Ring • Ring Once • Vibrate • Vibrate and ring • Vibrate then ring • None If you selected Ring, Increasing ring, or Ring Once, tap the drop down arrow next to Ring Tone and select the desired ringer. Note: To play the selected ringer, tap the play button arrow located under the ring tone box. 9. Tap to exit.
Turning the Ringer Off In some cases, it may be necessary to turn off the ringer to avoid causing a problem for those around you. To turn off the ringer or set it to vibrate: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap Phone. 5. Tap the drop down arrow next to Ring Type and select: 6. • Vibrate • None Tap to exit.
Chapter 5 - Phone Settings 58
Chapter 6 - Security Settings The following topics are discussed in this Chapter: • Accessing the Security Options • Special Numbers • Locking the i700 • Unlocking the i700
Accessing the Security Options The i700 has several security options associated with the phone that help guard against unauthorized usage. The security options allow you to configure special numbers, change the password, and reset the phone. Special Numbers Special numbers are numbers that can be called when the phone is placed in lock mode. Up to 10 numbers can be assigned in the special numbers dialog box. To set up the special numbers: 1. Tap Start located in the upper left corner of the screen. 2.
Locking the i700 When you lock your phone, it requires a password to return to normal operation. When a password is set up, the phone can be locked immediately or configured to lock when the screen blanks out. To lock the phone: 1. Tap Start located in the upper left corner of the screen. 2. Tap Settings. 3. Tap the Personal tab. 4. Tap Password. 5. Select one of the following options: 6.
Chapter 6 - Security Settings 62
Chapter 7 - Understanding Roaming The following topics are discussed in this Chapter: • Roaming Overview • Roaming Options
Roaming Roaming occurs when you travel outside the designated coverage area. Your phone automatically switches to roaming and the roaming icon is displayed on the screen. Your phone can roam on digital or analog networks. When you are roaming, extra charges may apply when making or receiving a call. To avoid any unwanted charges, there is a Call Guard option.
Roaming Options The following roaming options are available: • Home only - Your phone is available for normal operation only in the designated coverage area. • Automatic-A - The preferred roaming list is used to acquire service. If no preferred systems are found, any digital or analog “A” system is acquired. • Automatic-B - The preferred roaming list is used to acquire service. If no preferred systems are found, any digital or analog “B” system is acquired.
Chapter 7 - Understanding Roaming 66
Chapter 8 - Messaging The following topics are discussed in this Chapter: • Message Types • Voicemail • Text Messaging
Message Types Your phone can send and receive the following types of messages: • Voicemail • SMS Text Messages • Numeric Pages Messages are received at all times, even when the phone is powered off or locked. When a new message is received, a notification is displayed and a tone is sounded. If a message is received during a call, the ringer notification is muted to avoid disturbing the call.
Voicemail If a new voicemail is received, a notification screen is displayed alerting you that a new message is available. If multiple voicemail messages are received, the notification screen displays the number of new messages received. Connecting to the Voicemail System To connect to voicemail: 1. Tap the alert icon at the top of the screen. Note: The alert icon is displayed when more than one alert is available. 2. Tap the voice mail icon Note: You can also tap and hold . to speed dial voicemail.
Text Messaging The i700 allows you to create and send text messages to other users with SMS capability. Text messaging, also known as SMS (Short Message Service) allows short text messages to be received and displayed on your phone. 2-Way Text Messaging, also known as MO-SMS (Mobile-Originated Short Message Service,) allows messages to be sent from your phone. Messages can be sent from one phone to another by addressing the message to the recipient's phone number. Creating a New Message 1. 2.
check box next to Request SMS text message delivery notification. 7. Tap to send the message. Note: Please be advised that there is a 160-character limit for SMS text messages. This 160-character limit applies only to messages sent using the SMS function and not to messages sent using Pocket Outlook or other Email clients. The SMS software does not provide a character counter and you will not be alerted if you exceed the 160-character limit.
• Yes. • No. • I can’t talk right now. • I’ll be right there. • I’m running late. • Where are you? • Hi. • Goodbye. • Call me later.
Using My Text Messages 1. Create a new SMS Message. 2. Tap My Text and select the desired message from the list. 3. Tap to send the message. Editing My Text Messages To edit My Text Messages: 1. Create a new SMS Message. 2. Tap Edit and select Edit My Text Messages. 3. Select the message that you would like to edit. 4. Delete the old message from the box and enter the new message. 5. Tap to save and exit. Performing a Spell Check To perform a spell check: 1. Create a new SMS Message. 2.
1. Create a new message from the Inbox. 2. Tap Edit and select Language. 3. Select the desired language from the list. Cancel a Message To cancel a message: 1. From the new message screen, tap Edit and select Cancel Message. Inbox SMS & E-mail messages are saved in the Inbox. If the memory is full, a warning message is displayed and new messages are rejected. Older messages can be deleted to free up space for the incoming messages. To access the Inbox: 1.
3. Tap the drop down arrow next to Inbox and select Outbox. Sent Items Sent Items keeps a record of all the messages sent from your phone. To access sent items: 1. Tap Start located in the upper left corner of the screen. 2. Tap Inbox. 3. Tap the drop down arrow next to Inbox and select Sent Items. Drafts Drafts contain all the messages that were not completed and saved to send at a later time. These messages are accessed from the drafts folder in the Inbox. To access the stored folder: 1.
Deleted Items Deleted items keeps a copy of all the messages that were deleted. Once the messages are removed from the deleted items folder, they are permanently erased. To access the deleted folder: 1. Tap Start located in the upper left corner of the screen. 2. Tap Inbox. 3. Tap the drop down arrow next to Inbox and select Deleted Items.
Chapter 9 - Call Logs The following topics are discussed in this Chapter: • Call Logs
Call Logs When a call is received, made, or missed a record of the call is saved with all the available information in a call log. The call logs are: • All - Displays all call received, sent, or missed. • Missed - Displays any missed calls. • Outgoing - Displays all outgoing calls made from your phone. • Incoming - Displays all the incoming comes that were answered. • By Caller - Allows you to select an entry from the contacts and then displays any call information related to the contact.
Call Log Options Call log options allows you to view the call times for all calls and recent calls. You can also set the amount of time to keep call log items before they are deleted. To access the call log options: 1. From the phone screen, tap 2. Tap Tools and select Options. 3. Tap the drop down arrow under Delete call log items older than and select one of the following: 4. . • 1 week • 1 month • 2 months • 3 months • 6 months • 1 year • never Tap to exit.
Deleting Call Log Entries To delete the call log entries: 1. From the phone screen, tap . 2. Tap the drop down arrow in the upper left corner and select the desired call log list to delete. Note: To delete all call log entries, select All Calls. 3. Tap Tools and select Delete All Calls. 4. Tap Yes to confirm the deletion. 5. Tap to exit. Sending a SMS Message from a Call Log Entry SMS or Short Messages can be sent to other users that support SMS capabilities.
Chapter 10 - Call Features The following topics are discussed in this Chapter: • Caller ID • Call Waiting • Call Forwarding • Three-Way Calling
Caller ID Caller ID alerts you to who’s calling by displaying the phone number of the person calling when you receive an incoming call. Similarly, if you call someone who has this feature, your phone number displays on their phone. If the caller’s name and number are already stored in your Internal Phone Book, the corresponding name appears with the number. To block caller ID from displaying when you call another user: 1. Tap and then dial the phone number.
Call Forwarding Call Forwarding allows you to forward all your incoming calls to another phone number - even when your phone is turned off. You can still make calls from your phone with Call Forwarding activated. To activate call forwarding: 1. Tap . 2. Enter the area code and phone number where the incoming calls are forwarded. 3. Tap . A confirmation recording confirms the feature change. To deactivate call forwarding: 1. Tap 2. A confirmation recording confirms the feature change.
Three Way Calling Three way calling allows you to talk to two different people at the same time. When using this feature, normal airtime rates apply for each of the two calls. To use three way calling: 1. Enter the number you wish to call and tap . 2. During the conversation, tap 3. Dial the second person and tap . 4. When the person answers, tap all three parties. again to connect . If one of the people you called hangs up, you and the remaining caller stay connected.
Chapter 11 - Contacts The following topics are discussed in this Chapter: • Contacts • Notes • Making calls from Contacts • Speed Dialing • Beaming Contacts
Contacts Contacts is used to save important information regarding your friends, colleagues, or business acquaintances.
Microsoft ActiveSync application. For more information on ActiveSync, see “ActiveSync” on page 110. Adding a New Contact To add a new contact: 1. Tap Start located in the upper left corner of the screen and select Contacts. Note: You can also press the Contacts button front on the upper left corner of the i700. located in the 2. Tap New. 3. Enter the desired information in the spaces provided. When finished, tap . Finding a Contact To locate a specific contact, you can use the find feature.
Editing a Contact To edit an existing contact entry: to open Contacts. 1. Press 2. Locate the desired contact using find or scrolling through the contact list with the navigation key. 3. Tap the desired contact to view the summary screen. 4. Tap Edit. 5. Change or update the desired information. 6. Tap to save and exit. Deleting a Contact To delete a contact: to open Contacts. 1. Press 2. Tap the desired contact from the list. 3. Tap Tools and select Delete Contact. 4.
3. Tap the Notes tab. 4. To record a note, tap record icon located in the command bar. Tap to begin the voice recording. Tap when finished. 5. To write a note, tap the pen icon using the desired entry method. 6. To exit and save, tap and enter the note . Deleting a Note To delete a note: to open Contacts. 1. Press 2. Tap the desired contact from the list. 3. Tap the Notes tab. 4. Tap Edit and select Select All. 5. Tap Edit and select Clear.
Speed Dialing Speed dial can be used to the dial contacts that you talk to the most. Speed dial allows you to press either one or two keys and connect to the contact. Memory locations 2-99 are available for speed dialing. To speed dial: to open Contacts. 1. Press 2. Tap the desired contact from the list. 3. Tap Tools and select Add Speed Dial. 4. Tap the up or down arrows next to Location to select the desired memory location. 5. To save, tap 6. To exit the contact summary screen, tap . again.
Chapter 12 - Calendar The following topics are discussed in this Chapter: • Today • Scheduling an Alarm • Calendar • Scheduling an Appointment • Changing the Calendar View • Calendar Options • Tasks
Today The Today screen is used as a default information screen on the Pocket PC. When the i700 is powered on, the Today screen is displayed. Information displayed relates to the current day. The today screen displays the following information on the screen: • Current Date and Time • Owner Information • Current Appointments • Message Status • Current Tasks Date and Time Settings The clock settings can be accessed from the Today screen by tapping the clock icon next to the day and date entry on the screen.
Scheduling an Alarm Your phone has four programable alarm clocks that can be configured to ring daily at a desired time. To set up the alarm clock: 1. From the Today screen, tap the clock icon . 2. Tap the Alarms tab. 3. Tap the box next to the desired alarm. 4. Tap the day of the week. 5. Tap the time to display the time settings. Tap the up or down arrows to select the desired time. Note: Tap the AM or PM to cycle between them. 6. Tap when finished. 7. Tap again to save and exit.
Calendar The calendar allows you to create appointments and reminders for the day, week, month, or year. Scheduling an Appointment An entry in the calendar is called an appointment or reminder. When you schedule something, a description is displayed on the time line, and the duration is set to 1 hour by default. You can easily change the start time and duration for any event.
Scheduling a Timed Appointment You can schedule timed appointments for the current date or for future dates. To schedule a timed appointment for the current date: 1. Press the Calendar button on your phone to open the calendar to the current schedule. 2. Tap New. 3. Enter the Subject of the appointment or tap the drop down arrow and select a preset subject. 4. Enter the Location if necessary. 5. Tap the drop down arrow next to the Starts: and select the desired starting time of the appointment. 6.
12. Tap the Status box and select Free, Tentative, Busy, or Out of Office. 13. Tap the Sensitivity box and select either Normal or Private. 14. Tap to save the new appointment. Changing the Calendar View When you open the calendar, you can change the view to one of the following: • Appointments - Displays a list of the current days appointments. • Day - Displays the day with times and any appointments. • Week - Displays the week. • Month - Displays the month. • Year - Displays the year.
Calendar Options The calendar options allow you to configure: • 1st day of week - Allows you to select which day to begin the calendar. • Week View - Allows you to select a five, six, or seven day week view. • Show half hour slots - If this option is selected, half hour increments are displayed on the calendar. • Show week numbers - If this option is selected, the week numbers are displayed in the calendar. • Use large font - If this option is selected, a larger font is displayed on the calendar screen.
Tasks A task is something that needs to be done in a certain amount of time that requires a reminder to inform the user that the deadline has been reached. Once the task has been completed, it can be checked off and another task can be started. A task list can be set up to keep track of all the tasks that need to be done. They can be prioritized, so that higher priority items are finished first. Creating a new Task To create a new task: 1. Tap Start located in the upper left corner of the screen. 2.
11. Tap the Categories box and select Business or Personal. Tap . 12. Tap the Sensitivity box and select Normal or Private. 13. Tap to save the task. When the task is saved, it is added to the task list. The task list allows you to sort the tasks based on priority level, subject, start date, due date, or status. Marking a Task Complete When a task is completed, a check is used to indicate the item is done. To mark a task complete: 1. Tap Start located in the upper left corner of the screen. 2.
Task Options The following task options are available in the task list: • Set reminders for new items - If this option is selected, an alert is automatically created when a new task is created. • Show start and due date - If this option is selected, the start and due date is displayed in the task list. • Use large font - If this option is selected, a larger font is used on screen. To access the task options: 1. Tap Start located in the upper left corner of the screen. 2. Select Tasks. 3.
Editing a Task To edit a task: 1. Tap Start located in the upper left corner of the screen. 2. Select Tasks. 3. Select the desired task from the task list. 4. Tap Edit. 5. When finished, tap to save and exit. Beaming a Task You can beam a task to another Pocket PC using the IR port. This operation requires that both users have the Pocket PC software. To beam a task: 1. Tap Start located in the upper left corner of the screen. 2. Select Tasks. 3. Select the desired task to beam. 4.
Adding a Note to a Task To add a recorded or written note to a task: 1. Tap Start located in the upper left corner of the screen. 2. Select Tasks. 3. Select the desired task from the task list. 4. Tap Edit. 5. Tap the Notes tab. 6. When finished adding the note, tap to save and exit. Deleting a Task When a task is competed, it can be deleted from the task list. To delete the task: 1. Tap Start located in the upper left corner of the screen. 2. Select Tasks. 3.
Chapter 13 - Notes The following topics are discussed in this Chapter: • Recording a New Note • Writing a New Note • Saving Notes • Beaming a Note • E-mailing a Note
Notes Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. Notes can be attached to contacts, appointments, messages, and tasks. Notes can also be created in the Notes application. Notes can be either recorded or written. Recording a Note To record a note: 1. Tap Start located in the upper left corner of the screen. 2. Select Notes. 3. Tap New. 4. Tap the recording icon 5. Tap to begin recording. 6. Tap to stop recording.
Recording a Caller During a call you can record a note of the caller to get directions or a phone number, without looking at the device. To record a caller: 1. Make a call to the desired person. 2. During the conversation, press 3. When finished, press 4. End the call. to begin recording. again to stop recording. Note: The call needs to be disconnected to listen to the recording. If the caller is still connected, there is no audio. 5. To listen to the recording, tap the entry from the notes list.
Writing a new Note To write a new note: 1. Tap Start located in the upper left corner of the screen. 2. Select Notes. 3. Tap New. 4. Tap the writing icon 5. Select the desired character input method by tapping the up arrow located in the right bottom corner. 6. Enter the note and tap . when finished. Deleting a Note To delete a note: 1. Tap Start located in the upper left corner of the screen. 2. Select Notes. 3. Select the desired note from the list. 4.
Note Options The following options are available for Notes: • Default Mode - This option allows you to select a default mode of Writing or Typing. • Default Template - Allows you to select Blank Note, Meeting Notes, Memo, Phone Memo, or To Do as the default note. • Save To - Allows you to select Main memory or a Storage card (if available) as the default note storage location.
Chapter 13 - Notes 108
Chapter 14 - ActiveSync The following topics are discussed in this Chapter: • ActiveSync Setup Options • Creating a Partnership • IR ActiveSync Options • Scheduling ActiveSync
ActiveSync Microsoft ActiveSync is installed on your desktop/ laptop PC and the i700. It is used to synchronize data between the two devices. The ActiveSync application is already installed on your i700, but is required to be installed on the desktop/laptop PC before any synchronization can occur.
• Keyboard • Microsoft Mouse or compatible input device To install to your desktop/laptop computer: 1. Place the CD in the drive and wait for the Installation window to display. 2. Click on Install ActiveSync and USB Drivers. 3. Reboot your system when the installation is finished. Creating a New Partnership After you install ActiveSync and the USB drivers required for the i700 to connect properly, you need to create a new partnership. You can setup a standard or guest partnership.
5. Select or deselect the desired applications that you want to synchronize and click Next. 6. Click Finish. The i700 and the PC should perform the first ActiveSync. This may take some time, depending on the amount of information that needs to be synchronized. When the process is complete, disconnect the data cable from the i700 and close ActiveSync. Performing ActiveSync using IR If you do not have your data cable and you need to perform a ActiveSync operation, you can use the IR port.
Scheduling an ActiveSync You can also schedule the following ActiveSync options: • When connected to my PC, synchronize with the server every 5 min, 15 min, 30 min, 60 min, 2 hours, or 4 hours. • When not connected to my PC, synchronize with the server every 5 min, 15 min, 30 min, 60 min, 2 hours, or 4 hours. • When synchronizing remotely with my PC, disconnect when complete. These options are available on both the PC and i700. To access the scheduling options on the i700: 1.
Chapter 14 - ActiveSync 114
Chapter 15 - Microsoft Pocket Applications The following topics are discussed in this Chapter: • Using Pocket Word • Using Pocket Excel
Pocket Word Pocket Word works with Microsoft Word on your computer to give you easy access to copies of your documents. You can create new documents or copy documents from your computer to your i700. Synchronize the documents between your computer and your i700 to insure you have the most up-to-date content in both locations. Use Pocket Word to create documents, such as letters, meeting minutes, and trip reports. Creating a New Document To create a new file: 1.
• Rich Text Format (.rtf) • Plain Text (.txt). Pocket Word Options The following options are available in Pocket Word: • Default Template - Allows you to select Blank Document, Meeting Notes, Memo, Phone Memo, and To Do as the default document. • Save To - Allows you to select Main memory or a Storage card (if available) as the default document storage location. • Display in list view - Allows you to display Pocket Word only, Pocket Word & Text, and Known Types in the document list view.
Attaching a Recording You can attach a recording to a word document using the Record option. To attach a recording to an existing document: 1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap Pocket Word. 4. Select the desired document form the list. 5. Tap View and select Recording. 6. Tap 7. When finished, tap 8. Tap to start recording. . to save and exit. Deleting a Document To delete a Pocket Word document: 1.
Beaming a Document To beam a document to another Pocket PC user: 1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap Pocket Word. 4. Select the desired document from the list. 5. Tap Tools and select Beam Document. 6. When the document is transferred, tap Close. 7. Tap to exit the IR screen.
Pocket Excel Pocket Excel works with Microsoft Excel on your computer to give you easy access to copies of your workbooks. You can create new workbooks or copy workbooks from your computer to your i700. Synchronize workbooks between your computer and your i700 to insure that you have the most up-to-date content in both locations. Pocket Excel also provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering.
1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap Pocket Excel. 4. Select the desired workbook from the list. 5. Tap Tools and select Delete Workbook. 6. Tap Yes to confirm the deletion.
Beaming a Workbook To beam a document to another Pocket PC user: 1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap Pocket Excel. 4. Select the desired workbook from the list. 5. Tap Tools and select Beam Document. 6. When the workbook is transferred, tap Close. 7. Tap to exit the IR screen.
Chapter 16 - Other Applications The following topics are discussed in this Chapter: • Using File Explorer • Microsoft Reader • MSN Messenger • Terminal Services Client • Calculator • Games • Find • Help
Program Application There are several applications that come with Pocket PC 2002. You can also download and install other desired applications as needed. The i700 contains 60MB of memory to allow for continued expandability.
File Explorer The file explorer application allows you to open an explorer window similar to a desktop Windows based system. The explorer window allows you to navigate through the i700 to locate desired folders and files. Launching the File Explorer To launch the file explorer: 1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap File Explorer. Microsoft Reader Use Microsoft Reader to read or listen to electronic books.
To launch the Microsoft Reader application: launch the file explorer: 1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap Microsoft Reader. MSN Messenger MSN Messenger on your i700 provides the same chat environment as MSN Messenger on your PC. These features include: • Seeing who is online. • Sending and receiving instant messages. • Having an instant message conversation with a group of contacts. • Telling contacts you are unavailable.
Terminal Services Client The Terminal Services Client enables you to log on to a desktop computer running terminal services or remote desktop and use all the applications on the computer from your mobile device. For more information, refer to the help file in the Pocket PC. Games Pocket PC Solitaire is installed in the Games folder. To open the solitaire game: 1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap Games. 4. Tap Solitaire.
Calculator The calculator allows you to perform general mathematical functions, such as addition, subtraction, multiplication, and division. You can use the calculator to: • Perform basic calculations. • Store and retrieve values. • Display the last series of calculations. To open the calculator: the solitaire game: 1. Tap Start located in the upper left corner of the screen. 2. Select Programs. 3. Tap Calculator.
negative number, enter the number first and then press the +/- button. • M+ - The “M+” button places the current number in memory. Each new number you enter with the M+ button is added to the total stored in memory. The number that you add can be either a calculated value or any number you enter by pressing the number buttons. Pressing this button has no effect on the current calculation (or series of calculations); it merely places the value into memory until it is recalled.
Receiving a File To receive a file: 1. Prepare a file from another IR device and initiate a send command. 2. On the i700, tap Start located in the upper left corner of the screen. 3. Select Programs. 4. Tap Infrared Receive. 5. Aim the two devices at each other and wait for confirmation that the file has been received. 6. Tap Close.
Chapter 17 - Managing Applications The following topics are discussed in this Chapter: • Installing New Applications • Deleting Applications • Memory Allocation
Application Management Your i700 is running the Pocket PC 2002 operating system. This allows you to install or remove any Pocket PC 2002 compatible application on your device. Pocket PC applications can be downloaded from the web, purchased at retail outlets, or beamed from a friend using the IR feature. Installing New Applications Applications are installed using the ActiveSync application.
Deleting an Application Some applications are large and take up space on your i700. To help manage space and memory requirements for other software that may need to be installed, you can delete any application not stored in ROM. ROM applications are those that were installed at the factory and are required for the device to operate correctly. To delete an application: 1. Tap Start located in the upper left corner of the screen. 2. Select Settings. 3. Tap the System tab. 4. Tap Memory. 5.
Memory Allocation Memory is managed automatically, but can be temporarily adjusted using the memory slider. Memory is allocated to storage and programs. Usually the amount given to each is divided into equal amounts. It may become necessary to adjust one or the other to install or use another application requiring higher memory usage. To temporarily modify the memory settings: 1. Tap Start located in the upper left corner of the screen. 2. Select Settings. 3. Tap the System tab. 4. Tap Memory. 5.
Chapter 18 - Internet Explorer The following topics are discussed in this Chapter: • Launching Internet Explorer • Saving Favorites
Pocket Internet Explorer You can use Internet Explorer to view web pages on your i700 in two different ways: • By downloading pages and then performing a ActiveSync operation. • By connecting to the Internet Directly. While browsing you can also download new files and programs. If you are using Microsoft Internet Explorer version 4 or later, your favorites can be synchronized to your i700. Launching Internet Explorer To launch Internet Explorer: 1.
Saving Favorites When you find a web page that contains useful or interesting information, it can be saved as a favorite. To save a favorite: 1. Tap Start located in the upper left corner of the screen. 2. Tap Internet Explorer. 3. Navigate to the desired website. 4. Tap the yellow folder icon in the command bar. 5. Tap the Add/Delete tab. 6. Select the desired folder and tap Add. 7. Tap Add again. 8. Tap to save and exit.
Chapter 18 - Internet Explorer 138
Chapter 19 - Camera The following topics are discussed in this Chapter: • Launching the Camera Application • Camera Settings • Taking Pictures • Viewing Pictures • Beaming Pictures
Camera The i700 comes with a built-in camera mounted on a swivel integrated into the upper left corner of the phone. To use the camera, simply use the thumb wheel on the side and rotate to the desired angle. When you take a picture, it is saved into the phone’s memory. Pictures can also be saved on the desktop/laptop PC using ActiveSync. Launching the Camera Application To launch the camera application: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera.
Camera Settings The following camera settings are available: • Size - Allows you to select the desired image. The choices are 640x480, 320x240, and 160x120. The smaller the image size, the smaller the image file size. • Quality - Allows you to select the quality of the image. The choices are Normal, Fine, and Best. • Whitebalance - Allows you to select the white balance or how bright the image. The choices are Auto, Daylight, CoolWhite, Horizon, TL84, and Incandescent.
Timer The timer can be set to take pictures automatically after 3, 6, 9, or 12 seconds. When the timer reaches zero, a picture is taken and saved into memory. To set the timer: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap the timer button located to the right of the picture button: 4. • Once for three seconds. • Twice for six seconds. • Three times for nine seconds. • Four times for twelve seconds.
Viewing Pictures To view your pictures: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select: • View Image - Views the images one by one. • View Thumbnails - Views the entire library using small thumbnail pictures. Still View Navigation When you are viewing images in still view, the following options are available: • Actual Size dialog box - Display the image in a full screen format at regular size.
Actual Size Dialog Box The actual size dialog box allows you to view the captured image on screen at the size it was taken. The navigation screen is automatically displayed in the lower right corner of the screen. A small red box illustrates the viewable portion of the image. You can move the box by sliding it around to display the other portions of the image. To view the image in actual size: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Image.
Zoom 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Image. 4. Tap 5. Tap the plus magnifying glass icon to zoom in or tap the minus magnifying icon to zoom out. . Voice Record 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Image. 4. Tap box. to display the Voice Memo recording dialog 5. Tap to begin recording. 6. When finished, tap 7. To listen to the memo, tap 8.
Text Memo You can also attach a text memo to the image. To attach a text memo: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Image. 4. Select the desired image and tap 5. Tap the Memo tab. 6. Tap the area under Text Memo and enter the memo using the desired input method. 7. When finished, tap . to save and exit.
4. Select the desired image and tap 5. Tap the Information tab. 6. Tap . to exit. Thumbnail View When you are viewing images in thumbnail view, the following options are available: • Capture • View Image • Slideshow • Rename/Move • Delete • Tools Capture When you are viewing the thumbnails, you can return to the camera screen by using the capture command. To access the capture command: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3.
View Image To view the image on screen from the thumbnail: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Thumbnails. 4. Press the navigation key left or right to select the desired thumbnail. 5. Tap View and select View Image. Note: You can also tap the thumbnail to view it on screen. Slideshow To view a slide show of all the images that are stored in memory: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera.
Rename/Move The rename/move command allows you to rename the image and move it to a different folder. To rename/ move: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Thumbnails. 4. Tap Edit and select Rename/Move. 5. Enter the new name and folder using the desired input method. When finished, tap to save and exit. Deleting a Thumbnail To delete a thumbnail: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3.
Sending an Image Images can be beamed to another Pocket PC user using the built-in IR port. Images can also be sent by attachment using the email function. To access the send menu: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Thumbnails. 4. Tap Tools and select Send. Sort Type Images can be sorted by name or date using the sort type feature. To access sort type: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera.
Refresh Thumbnails To refresh the thumbnail screen: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Thumbnails. 4. Tap Tools and select Refresh Thumb. Change Folder To change the folder where the thumbnail images are saved: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Thumbnails. 4. Tap Tools and select Change Folder. 5. Browse to the desired new folder or create a new one.
sections of the scene. Adaptive Sensitivity combines the two images into a one dynamic image and reduces the image to a normal size to display on the screen without loosing any details. Activating AS Mode To turn on the AS mode: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap Settings and select AS Mode. AS Mode Icons When AS Mode is enabled, an icon is displayed in the upper right corner of the screen. This icon represents the image conditions.
Beaming Pictures To beam pictures: 1. Tap Start located in the upper left corner of the screen. 2. Tap Camera. 3. Tap View and select View Image. 4. Select the desired image by tapping the navigation arrows left or right. 5. Tap Send and select Beam Files. 6. Tap Close when finished.
Chapter 19 - Camera 154
Chapter 20 - Windows Media Player The following topics are discussed in this Chapter: • Launching the Media Player • Media Player Controls • Opening Media Files
Media Player You can use the Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your device or downloaded from the web. You can play files in either Windows Media or MP3 format, including files with extensions .asf, .wma, .wmv, and .mp3. Launching the Media Player To launch the Media Player: 1. Tap Start located in the upper left corner of the screen. 2. Tap Windows Media.
• - Displays the WindowsMedia.com web page. Loading Media Player Files Media player files must be copied to the i700 using the ActiveSync application. The files are copied to the Local Content folder on the i700 after the ActiveSync operation. To load a file: 1. Tap Start located in the upper left corner of the screen. 2. Tap Windows Media. 3. Tap Select. 4. Select the desired file from the list and tap 5. Tap to play the file. Chapter 20 - Windows Media Player 157 .
Chapter 20 - Windows Media Player 158
Chapter 21 - Safety and Warranty The following topics are discussed in this Chapter: • Safety Information • Warranty
Safety Information Battery Precautions Your phone is powered by a rechargeable Li-polymer standard battery. The read the following cautions concerning the battery: • Never use any charger or battery that is damaged in any way. • Use the battery only for its intended purpose. • If your phone has a strong signal, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.
• Always try to keep the battery at room temperature. A phone with a hot or cold battery may not work correctly, even if the battery is fully charged. Lilon batteries are sensitive to temperatures below 0 °C (32 °F). • Do not short-circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip, or pen) causes a direct connection between the positive and negative terminals of the battery. • Dispose of used batteries in accordance with local regulations. Always recycle.
3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving.
emergency number, as you would want others to do for you. 10. Call roadside assistance or a special non emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special nonemergency wireless number.
RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.
adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.
atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.
at the scene of an accident; do not cut off the call until given permission to do so. Other Important Safety Information • Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. • Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
obligations and allow you to enjoy this product for many years. • Keep the phone and all its parts and accessories out of the reach of small children’s. • Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. • Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged. • Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
Warranty STANDARD LIMITED WARRANTY What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
damaged due to normal use; (d) malfunctions resulting from the use of Product in conjunction with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada.
888-987-4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days.
·WARRANTIES OF TITLE OR NON-INFRINGEMENT; ·DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT; ·THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR ·COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.
THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
binding on SAMSUNG. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by SAMSUNG and should not be relied upon. Samsung Telecommunications America, L.P. 1130 East Arapaho Road Richardson, Texas 75081 Phone: 1-800-SAMSUNG Phone: 1-888-987-HELP (4357) ©2002 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval.
Chapter 21 - Safety and Warranty 176
Index A ActiveSync 110 ActiveSync - ActiveSync using IR 112 ActiveSync - Creating a New Partnership 111 ActiveSync - Installing 110 ActiveSync - Scheduling 113 Alert Sounds & Notifications 55 Application - Deleting 133 Application - Installing 132 Application - Memory Allocation 134 Application Management 132 B Battery - Charging 25 Battery - Installing 23 Battery - Removing 24 Battery and Charger Accessories 22 Battery Capacity 22 C Calendar 94 Calendar - Options 97 Calendar - Scheduling an Appointment 9
Call Log - Options 79 Call Log - SMS Message 80 Call Logs 78 Calls - Making and Answering 26 Camera 140 Camera - Beaming Pictures 153 Camera - Launching 140 Camera - Settings 141 Camera - Viewing Pictures 143 Contacts 86 Contacts - Adding 87 Contacts - Adding a Note 88 Contacts - Beaming 90 Contacts - Deleting 88 Contacts - Deleting a Note 89 Contacts - Editing 88 Contacts - Finding 87 Contacts - Making a Call 89 Contacts - Speed Dialing 90 Customer Care 15 I i700 - Buttons 31 i700 - Features 21 I700 - Fro
Media Player - Controls 156 Media Player - Loading Media Player Files 157 Message Options 71 Message Types 68 Messages - Deleted Items 76 Messages - Drafts 75 Messages - Inbox 74 Messages - Language 73 Messages - Outbox 74 Messages - Sent Items 75 Messages - Spell Check 73 N Navigating your PDA 46 Notes 104 Notes - Deleting 106 Notes - Options 107 Notes - Recording 104 Notes - Recording a Caller 105 Notes - Recording a Personal Note 105 Notes - Writing 106 O One Handed Dialing 27 P Password 39 Personal S
Pocket Internet Explorer 136 Pocket Internet Explorer - Launching 136 Pocket Internet Explorer - Saving Favorites 137 Pocket Word 116 Pocket Word - Attaching a Recording 118 Pocket Word - Beaming a Document 119 Pocket Word - Deleting a Document 118 Pocket Word - New Document 116 Pocket Word - Options 117 Program Applications 124 Programs - Calculator 128 Programs - File Explorer 125 Programs - Games 127 Programs - Infrared Receive 129 Programs - Microsoft Reader 125 Programs - MSN Messenger 126 Programs - T
Start Menu 46 System Volume 53 T Tasks 98 Tasks - Beaming 101 Tasks - Creating 98 Tasks - Editing 101 Tasks - Entry Bar 100 Tasks - Marking Complete 99 Tasks - Options 100 Text Messages 71 Text Messages - Editing 73 Text Messaging 70 Today 92 Today - Date and Time 92 Today - Owner Information 93 Today - Scheduling 93 Tone Length 54 V Voice Volume 50 Voicemail 69 Voicemail - Setting Up 15 Volume Levels 50 W Warranty 169 181
