SPD-3750T/3750/3350 37X/33X High Resolution WDR PTZ Dome Camera 37x/33x Ultra-Low Light & WDR SPEED DOME CAMERA SPD-3750T/3750/3350 User’s Manual Before installing and operating the camera, please read this user’s manual carefully.
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Contents • Features…………………………………………………………………………… 6 ■ Sequence Setting…………………………………………………………… 49 • Cautions for Using Auto Track (SPD-3750T)…………………………… 7 49 50 54 55 56 57 58 • Warnings & Cautions… ……………………………………………………… 9 • Components and Accessories……………………………………………… 12 • Component Names and Functions………………………………………… 13 • Installing Your Camera………………………………………………………… 15 ■ Speed Dome Camara and Appliances Wiring Diagram………… 15 ■ Communication DIP Switch Settings (SW2)………………………… 17 ▶ Protocol Settings………
Cautions for Using Auto Track (SPD-3750T) Features A/F 37x/33x Optical Zoom Smart P/T The built-in 37x(SPD-3750T/3750)/33x(SPD-3350) optical zoom lens with auto-focus is combined with a 12x digital zoom, providing a maximum of 444x/396x zoom. Versatile Protocol Processing This camera supports a total of 8 types of communication protocols: Samsung Techwin, Pelco-D, Pelco-P, Samsung Electronics, Panasonic, Honeywell, AD and Vicon.
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Warnings & Cautions Warnings & Cautions Warnings Stop using the camera if smoke or abnormal heat is detected. Do not install on your own.
Warnings & Cautions Warnings & Cautions Detailed Warnings and Cautions Cautions Do not install under extreme temperature conditions. Do not install under unstable lighting conditions. Use only under temperature conditions between -0ºC and +50ºC to prevent low graphics quality and product malfunctions. When using in high temperature conditions, provide good ventilation. Severe lighting changes or flickering may hinder normal camera operation. Do not drop the camera or subject it to physical shock.
Component Names and Functions Components and Accessories * Components Front Power Adapter (AC 24V, Peak 2.5A) Side User’s Manual * Accessories The following items are sold separately from the camera.
Installing Your Camera Component Names and Functions Speed Dome Camara and Appliances Wiring Diagram Camera Wiring Interface Board (Sold Separately) For the camera wiring, please refer to the picture below. The camera’s wiring interface board is equipped to a housing that is sold separately.
Installing Your Camera Note! * The following DVR models support all functions of the camera. - 16Ch : SVR-1680/1660/1645/1650E/1640A - 9Ch : SVR-960/945/950E - 4Ch : SVR-440 * The following DVR models support only the Pan, Tilt, Zoom, and Focus functions of the camera. - 9Ch : SVR-940 - 4Ch : SVR-450 Installing Your Camera Communication Protocol DIP Switch Settings (SW2) SW2 Pin No.
Installing Your Camera Installing Your Camera Baud Rate Settings • Select the transfer speed of a selected communication protocol. No. 1 2 3 4 Baud Rate(BPS) 2,400 4,800 9,600 19,200 SW2-#5 ON ON OFF OFF • Camera Backup Settings SW2-#6 ON OFF OFF ON Select a communication method for the camera.
Installing Your Camera Installing Your Camera • Camera ID Chart ID 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 SW1-#1 ON/OFF OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON SW1-#2 OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF SW1-#3 OFF OFF OFF O
Installing Your Camera ID 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 SW1-#1 ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON SW1-#2 OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON SW1-#3 ON ON
Installing Your Camera ID 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 SW1-#1 ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON SW1-#2 ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF O
Installing Your Camera Installing Your Camera Preparing and Installing Camera Bracket Preparing Adapter and Cables – Power Adapter Power adapter has the capacity of AC24V 2.5A. For the installation guidelines for the brackets and housings, refer to the user’s manual enclosed with the bracket or housing that is sold separately. • Camera Wiring Diagram 1 – Video Cable A BNC coaxial cable shown in the picture is required to connect Speed Dome’s video output terminal to the monitor.
Installing Your Camera Installing Your Camera On-Ceiling Mount Type Installation Example • Camera Wiring Diagram 2 1. Attaching Template and Installing STB-370PC Attach the enclosed template to the ceiling, then drill a hole in the ceiling according to the diameter marked on the template. Drop the camera cables down from the ceiling through the hole. Next, install the exposed bracket STB-370PC to the ceiling as shown in the picture.
Installing Your Camera 3. Setting Up Camera DIP Switches DIP switches for communication and ID protocols are located on the bottom of the camera. For the switch settings, refer to the dip switch settings of this manual. ID(SW1) Protocol(SW2) Installing Your Camera ✽ To attach or detach the camera, refer to the picture. * Attaching the camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”.
Operating Your Camera Interface Symbols • Motion Detection Standby/Operation Display : - When in standby mode, the " " in the upper right of the screen blinks and then changes to " " if motion is detected. • Alarm Input Port Status Display : - "①","②","③" and "④" in the upper right of the screen blink. • Current Alarm Port Display According to Input Alarm Ports(Priority) : - Only one of " "," "," "," " in the upper right of the screen blinks.
Operating Your Camera Operating Your Camera *OSD Menu Chart P1 ① Camera Setting P2 P3 ①Focus Mode P4 P5 Auto/Manual/One Shot AF Mode Auto/Tracking/Off ① Focus ②Zoom Tracking &Zoom Speed Slow/Medium/Fast ③Digital Zoom Off/2X/3X/4X/5X/.../12X ATW/INDOOR/OUTDOOR/AWC ② White Red AWB Mode Balance Manual Blue ①Brightness 0~100 Auto ②Iris Manual Iris Level ③Exposure ③Shutter ---/A.FLK/Manual Sens-Up Limit ④Sens-Up Auto/Off X2/X4...
Operating Your Camera ④ OSD Setting ⑤ Alarm Setting ② Camera Name ③ Preset Number ④ Preset Name ⑤ Sequence Status ⑥Area Name ⑦ PTZ Position ⑧Language ① Alarm Enable Off On/Off On ①On/Off ②Edit Off On/Off On On/Off Off On/Off On English/Chinese/Français/Deutsch/Español/Italiano English On/Off Off MOD:NC/NO/OFF Priority:1~4 SEQ:Preset/Swing/Group/Tour/ A.Pan/Trace/Off 1~4,MD,TRK Off/On/Momentary 1~60(Sec), Dwell Time 1~60(Min), 1~60(Hour) On/Off 1~60(Sec), 1~60(Min) Time1~2 ④Aux.
Functional Description 1.2 Zoom Tracking ▶ Main Menu/Camera Setting/Focus & Zoom/Zoom Tracking Through this menu you can set up the camera’s focus mode when zooming. Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Mode : - Auto : Auto-focuses when zooming. - Tracking : Focuses manually when zooming. - Off : Disable the focus modes when zooming. (Full manual mode) Speed : - Slow/Fast : Adjusts the zooming speed. ➡ 2.
Functional Description 3. Exposure ▶ Main Menu/Camera Setting/Exposure Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status ➡ Camera Setting ① Focus & Zoom White Balance ③ Exposure ④ Back Light AGC SSNR ⑦ Day & Night ⑧ Others ATW OFF Medium Medium ➡ The Exposure settings are to control the camera’s exposure meter. Brightness : Adjusts the screen brightness.
Functional Description Functional Description 4.2 WDR ▶ Main Menu/Camera Setting/Back Light/WDR When there are both bright and dark areas at the same time, this mode makes both areas distinctive. Main Menu ① ② ③ ④ ⑤ ⑥ 4.
Functional Description 4.4 User Area Setting ▶ Main Menu/Camera Setting/Back Light/User You can selectively choose a screen area to see objects within the area more clearly than others. Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Four-direction Joystick Controls : - Moving the joystick in all four directions—upward, downward, left, and right—adjusts the location and size of a selected area.
Functional Description 6. SSNR (Samsung Super Noise Reduction) ▶ Main Menu/Camera Setting/SSNR Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status 7. Day & Night ▶ Main Menu/Camera Setting/Day & Night SSNR significantly reduces the amount of low luminance noise. Main Menu - Off : Disables the noise reduction function. - Low : Reduces only a small amount of noise, but generates almost no afterimage. - Medium : The most commonly used mode.
Functional Description 8. Others ▶ Main Menu/Camera Setting/Others Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status ➡ Camera Setting ① Focus & Zoom White Balance ③ Exposure ④ Back Light AGC SSNR ⑦ Day & Night ⑧ Others ATW OFF Medium Medium ➡ Others Sync Stabilizer ③ Image Adj Freeze Dome Cover INTERNAL OFF OFF Inner Sync : Enables selecting Internal Synchronization or the external Line Lock.
Functional Description 10. Preset 10.1 Preset Location Saving ▶ Main Menu/Sequence Setting/Preset/Setting Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Setting Up Preset Numbers : Selecting the Preset Setting menu brings up a screen as shown below. Move the joystick in all four directions to select the desired number.
Functional Description 10.3 Preset Name Setting ▶ Main Menu/OSD Setting/Preset Name/Edit Using this function, you can add names to preset locations. up to 12 characters. Once a name is entered, use the joystick and the Enter key to perform the Set command and save the name. Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status ➡ Functional Description 10.
Functional Description 11. Swing SEQ Functional Description 12. Group SEQ ▶ Main Menu/Sequence Setting/Swing SEQ The Swing function commands the camera to move between 2 selected locations, monitoring the route. Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Pan Swing : Activates the Pan function for the Swing operation. Tilt Swing : Activates the Tilt function for the Swing operation.
Functional Description 13. Tour SEQ Functional Description 14. PTZ Trace ▶ Main Menu/Sequence Setting/Tour SEQ Selecting Tour SEQ recalls groups of preset locations in a consecutive manner. Up to 6 groups can be listed for this function. Main Menu ① ② ③ ④ ⑤ ⑥ ▶ Main Menu/Sequence Setting/PTZ Trace Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Settings : Selecting the Settings menu brings up the following screen.
Functional Description 15. Auto Run ▶ Main Menu/Sequence Setting/Auto Run If there is no controller operation by the user for a certain time, the sequence operation designated by the user will be executed. Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Mode : - Home : Auto run Home Position (Refet to the Preset Menu.) - Preset : Auto run a selected preset number. - Swing : Auto run a selected Swing mode.
Functional Description Functional Description 17. Area Setting 18. Area Masking ▶ Main Menu/P/T Setting/Area Setting The Area Setting menu enables selecting certain locations in the course of the Pan and Tilt operation, and then display the areas with the OSD (On Screen Display) texts when the camera passes through them. Up to 8 areas can be selected.
Functional Description 19. Prop. P/T Functional Description 20. Digital Flip ▶ Main Menu/P/T Setting/Prop. P&T This commands the camera to change the Pan and Tilt speed automatically according to the current zoom power. Moving the joystick clockwise (Tele) slows down and counterclockwise (Wide) accelerates the Pan and Tilt speed, allowing detailed adjustments. Turning this “Off” executes the function the optical 1x zoom speed regardless of how high a the zoom power is.
Functional Description 21. Image Holding ▶ Main Menu/P/T Setting/Image Hold When the camera is moving between preset locations, this function stops a previous camera feed until the camera reaches the next location. This is useful to help the screen observer keep sharp eyes and to monitor multiple locations within a network. Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status Functional Description 22.
Functional Description Auto Release : Enables setting a maximum duration to follow an object. When the duration expires, the camera stops following the object and returns to the start position to follow another objects. Auto Return : - Off : Commands the camera to stay on a last spot instead of returning to the initial position. - Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and then return to the start position.
Functional Description - Target : I ndicates the camera’s target for the Auto Track operation; when a moving object is detected, a square grid appears and surrounds the object. Target Lock : Target Lock is useful to select and follow an object using the Auto Track mode while operating the camera with the joystick. Target Lock can be turned On or Off. To activate the Auto Track mode, turn on Target Lock, select an object to follow, and then press Enter. Functional Description OSD Setting 24.
Functional Description Functional Description Alarm Setting Notes 25. Alarm Setting • As shown in the picture above, the Alarm Input must be entered with the Open and Close switch signals. Supplying power without entering the signals may damage the product. 25.1. Setting Up Alarm Input ▶ Main Menu/Alarm Setting/Alarm Input Alarm Enable : - On/Off : Enables or disables the Alarm function.
Functional Description Functional Description 25.2. Alarm Output ▶ Main Menu/Alarm Setting/Alarm Output Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status ➡ Alarm Setting ② ③ ④ Alarm Enable OFF Alarm Input Alarm Output Aux Output ➡ Alarm Output Setting1 Setting2 Timer Timer □1 □2 □3 □4 □MD □TRK □1 □2 □3 □4 □MD □TRK 1 OFF 1 OFF 25.3.
Functional Description Initialize 26. Initialization Menu ▶ Main Menu/Initialize Main Menu ① ② ③ ④ ⑤ ⑥ Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status ➡ Initialize ① ② ③ ⑤ Power On Reset Factory Default Camera Default Auto Refresh OFF Auto Track Default Power On Reset : Restarts the camera. Factory Default : Enables resetting the camera to its factory default settings.
Operating Your Camera Status SPD-3750T 27. Status ▶ Main Menu/Status Displays the settings and version of the dome camera. Main Menu ① ② ③ ④ ⑤ ⑥ Product Specification Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Status ➡ Camera Status CAM MODEL = CAM VERSION = DOME VERSION = CON PROTOCOL = DOME ID = CONTROLLER = TRACK VERSION = 37PC 2.3 0.10 SAMSUNG TW 001 Simplex-9600 0.10 Cam Model : Indicates the model name of the camera.
DECLARATION OF CONFORMITY Product Specification Electronic Shutter Serial Com. Protocol Alarm Digtal Flip Operating Temperature/ Humidity Storage Temperature/ Humidity Input Voltage Power Consumption External Dimensions (Ø×D) Weight AUTO(NTSC:1/60~120,000sec, PAL:1/50~120,000sec)/MANUAL/A.
SALES NETWORK • • AMSUNG TECHWIN CO., LTD. S 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungcctv.com • AMSUNG TECHWIN EUROPE CO., LTD.
