Quick Guide

3
Video wall configuration guide
1 Monitor output for each decoder after the set boots 2 Configure the video walls and allocate monitors. 3 Registering camera
VGA VIDEO OUTHDMI NETWORK
ACTLINK
DC12V
NETWORK
ACT
DC12V
VIDEO OUT
NETWORK
LINK
HDMI
VIDEO OUT
HDMI
VGA
VGA
VIDEO OUT
VGA OUT CVBS OUTHDMI OUT


c
b
 Create video walls.
b Add video walls (Wall 01 2X1, Wall 02 1X1)
c Assign monitors


c
b

 Add a camera
b Add cameras with automatic/manual registration
c Select the camera list sort function
 Sort by name()/IP or ascending()descending.
4 Setting Video Wall Layout 5 Monitoring by video wall

c
b

 Specify the monitor of the corresponding video wall to be
applied by clicking it
b
Select and apply a split mode to the selected monitor (Can
be applied to each monitor)
c Assign it to the corresponding tile with the mouse in the camera list
 Repeat steps 1 to 4 if a layout is added after saving your layout

Wall 1 Wall 2
Wall 1 Wall 2
Monitor (HDMI)
Monitor (VGA)
 Select a monitor on the Wall tab
b Set the layout of the selected monitor on the Layout tab
 When this is [ ] clicked, the video wall is enlarged to full screen.
When this is [ ] clicked, the video wall zoom changes to the original size.
c The layout is applied in real time