Quick Guide

Using Device Manager

Wisenet Device Manager allows you to set up and run your network and easily check the network status.

❖

Installing Device Manager

To download the Device Manager program, visit the official website of Hanwha Techwin (http://www.hanwha-

security.com).

1 On the website, go to <Technical Guides> - <Online

Tool> to download Device Manager.

2 Download and install the Device Manager program.

~ Once installed, the program will run automatically.

~ For the details of how to use Device Manager, see

<Help> in the main menu.

❖

Watch the video guide of Device Manager

On the Download screen of the Device Manager program, click < >.

You can learn about the following in the video.

~ Device Manager intro

~ Product login and password change

~ Use project

~ Change product IP

~ Check product information report

~ Save and restore product settings

~ Camera video settings

~ Camera setup settings

~ Download/update firmware

Your preferred language and a new password must be entered during your initial connection after purchase.

1 Select a language for the <Language> field.

2 In the <New P/W> field, enter a new password for the

admin account.

3 In the <Confirm P/W> field, reenter the new password

for the admin account.

4 Click the [Apply] button.

After the new password is successfully registered, a

※ For security, be sure to change the password in

<User>-<Administrator> in the setting screen.

※ If you enter a user name and password, and then

check the ‘Save password in the password list’

checkbox, the user name and password will be

automatically set for the next time you connect.

` You cannot double-login with the "admin" account.

` It takes about five minutes after you disconnect from the “admin” account to access the user account.