SYSTEM CONTROLLER User Manual SPC-2010
System Controller User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
overview IMPORTANT SAFETY INSTRUCTIONS ● 1. Read these instructions. OVERVIEW 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
Please read the following recommend safety precautions carefully. Reference : Providing useful information for the user. Notice : If the instructions are not followed correctly damage to the goods or person may occur. For safety please read this manual for the before using of goods and keep it in the safe place. English _5 OVERVIEW User’s Manual is a guidance book on how to use the product. Below is a key to the following signs that are used in this manual.
overview CONTENTS 3 3 6 8 9 10 Important Safety Instructions Contents Key Features What’s Included System Controller at a Glance INSTALLATION 13 Precautions 14 To Connect a RS-485/422 Device 19 19 24 Getting Started Controlling the PTZ Camera Controlling DVR OVERVIEW 13 CONNECTING TO AN EXTERNAL DEVICE 14 USING THE MENU 19 6_ overview
MENU SETTING 32 32 34 35 Specifications Troubleshooting Product Overview OVERVIEW APPENDIX PTZ setting DVR Setting Controller Setting Joystick Calibration ● 26 26 27 28 31 English _7
overview KEY FEATURES SPC-2010 system controller enables you to control external devices such as PTZ camera, DVR using RS-485/422 communications. It provides a user-friendly interface with joystick. • Long-distance remote control • With RS-485/422 communications, the control distance is a maximum of 1km. • Integrated system control • With a single system controller, you can control all cameras (receiver unit), DVRs. Compatibility List • Camera • DVR SRD-XXXX series (Not supported by SRD-480D.
WHAT’S INCLUDED ● Unpack the product package and place the product on the floor or a flat surface. Check if the following components are all included in the product package.
overview SYSTEM CONTROLLER AT A GLANCE Front Side b c ESC PWR PWR Tx Item 1 2 3 4 5 6 7 8 9 CLR 0 ENT MON CAM MENU PRESET GROUP FUNC SETUP PTZ MODE AUDIO REC SEARCH FREEZE ALARM Rx PTZ/DVR A/F AUX IRIS FOCUS W ZOOM T Description DVR Play Bar Play/Pause, Fast Forward/Fast Backward, Stop, Record b ESC / PWR Cancels a command or turns power on/off. c LCD Display Display the operation status and the setup menu of the system controller.
Item IRIS Control Iris (-: CLOSE/+: OPEN) FOCUS Adjust the focus (-: NEAR/+: FAR) ZOOM Zoom In/Out (W: WIDE/T: TELE) MENU Enters PTZ and DVR menu. FUNC Press [FUNC] button and desired function button to run. SETUP Press a number button and press [SETUP] button to enter the settings menu. OVERVIEW Others ● Camera Lens Bar Description Used in DVR mode for controlling the camera connected to the DVR.
overview Rear Side Tx1 Tx2 Tx3 TRx PROGRAM DC IN 12V b Item Description Power DC 12V input port. ( b RS-485/422 For RS-485/422 communication, connected to camera, DVR and other control devices. M [PROGRAM] is not for user’s accessing.
installation PRECAUTIONS INSTALLATION • The product is designed for indoor use only. • Keep it away from water or moisture. • Do not put excessive force on it. • Do not pull out the power cable forcibly. • Do not dismantle it at your own. • Use only the rated I/O range. • Install the system controller on a flat table. • The layout of the system controller and the wiring system are critical for a proper system operation. • You must turn off the product before installing it.
connecting to an external device SPC-2010 system controller can be used in connection with an external device such as camera or DVR. TO CONNECT A RS-485/422 DEVICE With the system controller, you can control the PTZ camera or DVR that supports RS-485/422 communication protocols. 1. Connect the rear Tx1 with RS-485 port of the PTZ camera or DVR. 2. According to the external device connected, select RS-485 (Half Duplex) or RS-422 (Full Duplex) connection.
Connecting the PTZ Camera Depending on the camera, the polarity may differ. For more information, refer to the user manual of the PTZ camera. For the half duplex system - Connect Rx (+) of RS-485 port of the PTZ camera with TRx (+) of SPC-2010. - Connect Rx (–) of RS-485 port of the PTZ camera with TRx (–) of SPC-2010. If connecting a PTZ camera without using DVR device, you can connect to Tx1, Tx2 or Tx3 instead of TRx. / 0 "6%*0@*/ "6%*0@065 "9*$0. *.0 7%$ 59 "9*$0. *.0 7%$ 59 $0.
connecting to an external device For the full duplex system - Connect Rx (+) of RS-485 port of the PTZ camera with Tx1 (+) of SPC-2010. - Connect Rx (–) of RS-485 port of the PTZ camera with Tx1 (–) of SPC-2010. - Connect Tx (+) of RS-485 port of the PTZ camera with TRx (+) of SPC-2010. - Connect Tx (–) of RS-485 port of the PTZ camera with TRx (–) of SPC-2010. / 0 "6%*0@*/ "6%*0@065 "9*$0. *.0 7%$ 59 "9*$0. *.0 7%$ 59 $0. "9*$0. *.
Connecting SRD-16XX/8XX Series DVR ● Connect between DVR and SPC-2010 using RS-485 port on the rear of the DVR. - Connect Tx (+) of RS-485 port of the DVR with TRx (+) of SPC-2010. - Connect Tx (–) of RS-485 port of the DVR with TRx (–) of SPC-2010.
connecting to an external device Connecting SRD-4XX DVR Connect RS-485 port on the rear of SRD-4XX with SPC-2010. For the half duplex system - Connect Tx (+) of SRD-4XX with TRx (+) of SPC-2010. - Connect Tx (–) of SRD-4XX with TRx (–) of SPC-2010. TRx Tx3 Tx2 Tx1 Tx1 Tx2 Tx3 TRx Tx3 Tx2 Tx1 TRx M Not supported by SRD-480D.
using the menu GETTING STARTED ● USING THE MENU Power 1. When powered off, press [PWR] to turn on. 2. When powered on, press and hold [PWR] to turn off. Initial Screen • SAMSUNG-T: Shows the current channel’s protocol used for the camera or DVR. • 9.6K: Shows the current channel’s baud rate set for the camera or DVR. SAMSUNG-T 9.6K ID : 001 • ID: Shows the current channel’s number. CONTROLLING THE PTZ CAMERA To enter PTZ control mode Press [PTZ/DVR] button to switch to PTZ control mode.
using the menu PAN/TILT Control You can use the controller joystick to adjust the pan/tilt angle of the camera. The farther from the center of the joystick is, the faster the moving speed becomes.
IRIS Press [IRIS – / +] on the controller to adjust the brightness of the camera video. ● USING THE MENU • IRIS – : camera Brighter • IRIS + : camera Darker FOCUS Press [FOCUS – / +] on the controller to fit the camera focus. • FOCUS – : Focus Closer • FOCUS + : Focus Farther ZOOM Turn the joystick clockwise, or press [T] to control the zoom-in operation of the camera. Turn the joystick counter clockwise, or press [W] to control the zoom-out operation of the camera.
using the menu PRESET Move the camera to a pre-determined point. To set a preset 1. Using the joystick and controller buttons, move the camera to a desired location. 2. Enter a preset number. 3. Hold down the [PRESET] button for 2 seconds to save the preset location. To execute the preset 1. Select a camera. 2. Enter a desired number(s) using the number buttons and press [PRESET]. 3. The preset will be executed. M You can select preset numbers from 1 to 255 using the controller.
A/F ● 1. Pressing the [A/F] button. USING THE MENU 2. Execute One Shot AF function of the camera. M A/F function is available in SAMSUNG-T/E and Pelco-D/P protocols. AUX Controls the camera’s Aux output operation. • AUX ON : Press the number of desired AUX channel and then briefly press [AUX] button to set Aux output to ON. • AUX OFF : Press the number of desired AUX channel and then press [AUX] button for about 2 seconds to set Aux output to OFF.
using the menu CONTROLLING DVR Depending on the model, the DVR may have different features available. For details, refer to the applicable user manual. M An improper setting may cause a problem using the DVR. To enter DVR control mode Press [PTZ/DVR] button to switch to DVR control mode. To select a DVR 1. Use the number buttons to enter a DVR number (0~255) and press [ENT]. 2. Screen according to the selected DVR model appears.
To control the DVR menu ● 1. To control the menus of the selected DVR, press [MENU] in the DVR control bar. To control the PTZ device that is connected to DVR Depending on used DVR model, you may not be able to directly control PTZ camera connected to the DVR. In such cases, press [PTZ/DVR] button in DVR control mode to switch to camera control mode, and then you can control the camera. To control the PTZ device in DVR mode 1. In DVR control mode, select a channel for PTZ control. 2.
menu setting PTZ SETTING From the PTZ setup screen, you can specify the protocol and baud rate. 1. Press [1] on the number pad. Hold down the [SETUP] button to enter the PTZ SETUP mode. 2. Enter the 4-digit password. Default Password : 4321 J The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user. 3.
DVR SETTING 2. Enter the 4-digit password. Default Password : 4321 J The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user. 3. To change a channel address, select a channel by moving the joystick to the right or left. Or you can enter the channel number and then press the [ENT] button. 4.
menu setting CONTROLLER SETTING 1. Press [3] on the number pad. 2. Hold down the [SETUP] button to enter the controller’s MAIN SETUP mode. [ MAIN SETUP ] PASSWORD [ **** ] 3. Enter the 4-digit password. Default Password : 4321 J The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user. 4.
LCD Backlight • ON : Keeps the backlight on at all times. [ MAIN SETUP ] 3. BACKLIGHT : AUTO • OFF : Keeps the backlight off at all times. Sleep If the controller is not used for specified time, it switches to SLEEP mode. Operating joystick or button of the controller exits SLEEP mode. [ MAIN SETUP ] 4. SLEEP : OFF Buzzer You can set the controller to beep on button pressings. • ON: Each pressing of a button beeps. • OFF: Pressing a button produces no sound. [ MAIN SETUP ] 5.
menu setting Joystick’s Serial Command Transfer Cycle Select a PTZ serial command transfer cycle for using the joystick. Shortening the transfer cycle increases the response speed of the camera. J [ MAIN SETUP ] 7. JOY SPD : 100MS Shortening the joystick’s serial command transfer cycle may cause certain camera models to not process commands properly. To prevent and resolve such malfunctions, extend the transfer cycle. Password You can set the controller password. Enter a new password.
JOYSTICK CALIBRATION ● 1. Press [4] on the number pad. 3. At each option, move the joystick as far as you can, and then press the [ENT] button to calibrate. [ JOYSTICK CALI. ] 1. PTZ OFFSET ** [ JOYSTICK CALI. ] 2. PAN LEFT *** Move to the far left side Joystick in the Center [ JOYSTICK CALI. ] 4. TILT UP *** [ JOYSTICK CALI. ] 7. ZOOM TELE *** [ JOYSTICK CALI. ] 6. ZOOM WIDE *** Move to the far lower side Move to the far right side [ JOYSTICK CALI. ] 5.
appendix SPECIFICATIONS Item Description Communication Communication System RS-485 / 422 Baud Rate 2,400 ~ 57,600 bps Compatibility PTZ / DVR / RECEIVER PTZ SAMSUNG-T/E, PELCO-D/P, Panasonic, Vicon, AD, Honeywell, BOSCH, ELMO, GE Zoom SCZ DVR SRD (Not supported by SRD-480D.
Environmental Operation Humidity 20%~85% RH APPENDIX 0°C ~ 40°C ● Operation Temperature Electrical Input Voltage /Current 12 VDC Power consumption 1.1W Mechanical Dimensions (WXHXD) W334.1 X H171.1 X D105.2 mm (13.15 X 6.74 X 4.
appendix PRODUCT OVERVIEW 171.1 (6.74") unit : mm (inches) 334.1 (13.15") 105.2 (4.14") 76.6 (3.02") 34_ appendix 28.6 (1.
TROUBLESHOOTING ● Countermeasures If the power is not turned on • Check the connection between the main unit and adaptor. If the problem persists even if there’s no problem with connection, consult your dealer for servicing. If the joystick does not move, or the controller buttons are not pressed • There may be a problem with the controller board. Please contact your nearest dealer for further assistance.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.