Network Controller SPC-2000 User Guide Before installing and operating this product, please read this manual thoroughly.
License Agreement All copying, reprinting, and translating to other languages of part of or all of its contents without the permission of Samsung Techwin Co., Ltd. are expressly prohibited. Samsung Techwin Co., Ltd. reserves all copyright of this user’s manual. Limited Liability - This product is support equipment for surveillance system. Therefore, we can't compensate for material loss and/or personal injuries by robbery, fire, natural disaster or other such events.
Cautions Before Use Cautions Before Use Caution Warning ■ Please contact your vendor for product installation. - Improper connection and/or installation of the product may cause electric shock, fire, severe injuries, and damage to property. ■ Please install the product on stable, level ground. - Always test and verify the durability and stability of the installation location. - Dropping the product from heights may cause product malfunction and/or cause injuries.
Table of Contents ● License Agreement………………………………………………………… 2 ● Limited Liability… ………………………………………………………… 2 ● Product Warranty…………………………………………………………… 2 Product Features The SPC-2000 consists of a 3-axis handle for PTZ operation and 12 buttons for custom settings. The SPC-2000 helps you to control monitoring cameras more easily and accurately. It supports USB connection for convenient use in a computer environment.
Pan / Tilt / Zoom Using Joystick ■ To pan your camera, pull the joystick left and right. To tilt, pull it up and down. The farther you move the joystick from the center, the faster the camera moves. To zoom in and out on the monitoring screen, rotate the joystick clockwise or counterclockwise. The more you rotate the joystick, the faster the zoom speed is. System Requirements - Windows 2000, Windows XP, Windows Vista, Windows 7 - Microsoft DirectX 7.
Installing the Controller Calibrating the Controller Pic 7. Device Calibration Wizard Pic 5. Game Controllers Window Troubleshooting Calibrating the Controller For best results, all the axes of the controller must be calibrated. 1. Go to [Start] → [Settings] → [Control Panel] → [Game Controllers] → [Properties] → [Setup]. 2. Press the [Calibrate] button to run the “Device Calibration Wizard.” 3. Calibrate the axes following the instructions on the screen.
Product Design Product Specifications Model Name SPC-2000 Joystick Axis Hall-effect 3 Axes 12ea Button Performance Range of Movement X/Y-Axis Z Axis Center Minimum Power Operating Power Maximum Power Materials Housing Handle Cover Knob Interface Port Software Drivers Electric Features Operating Voltage Operating Current Operating Environment Temperature Miscellaneous Power Cord Length Size Size Length Width: Weight Color Ø 1.39in (35.31mm) ±18° ±40° Single Spring, All Directions 0.109 [N·m] 0.
DECLARATION OF CONFORMITY Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNGTECHWIN CO., LTD. Manufacturer's Address SAMSUNGTECHWIN CO., LTD. MEMO 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment Network Controller Model Name SPC-2000 Beginning Serial NO. C5A46V3Z200001X Year of Manufacture 2010.04.
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL: +82-70-7147-8740~60 FAX: +82-31-8018-3745 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE LTD.
