Specifications

Operating Instructions
11-6 Samsung Electronics
USB Interface (SC-D352/D353/D354/D355 only)
✤ To ensure proper communication between the camcorder and a PC, please set the USB Version before connecting
the camcorder to a PC.
✤ USB Version is accessible in every mode.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)
3. Press the MENU button.
■
The menu list will appear.
4. Move the Menu selector to the left or right to select System, then press the Menu selector.
5. Move the Menu selector to the left or right to select USB Version, then press the
Menu selector.
■
Set the USB Version to USB 2.0 when it is supported by both PC and its OS.
■
If either the PC or OS does not support USB 2.0, set the USB Version to USB 1.1.
6. To exit, press the MENU button.
[ Notes ]
■
When the USB Version is not set properly, the USB connection may not be established.
■
USB2.0 may not be supported by certain PCs depending on their specifications.
In this case, choose the USB1.1 for USB connection.
■
When selected USB2.0 is not supported by the PC, the USB1.1 will be used for the USB connection
automatically.
Setting the USB Communication Speed
M.Player Mode
√System
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
√On
√On
√USB 1.1
√Computer
√English
Move Select Exit
MENU
Move Select Exit
MENU
1
USB 1.1
USB 2.0
M.Player Mode
Back
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
4
5
USB Interface (SC-D352/D353/D354/D355 only)
✤ To play back MPEG moving pictures recorded by the camcorder or streaming data transferred through the USB connection
on a PC, the DV Media Pro program should be installed.
✤ DV Media Pro User's Manual is included on the accompanying CD(D:\help\) in Adobe's Portable Document
Format(PDF) The user's manual can be viewed using Acrobat Reader software, which is also included on the CD.
(The Acrobat Reader is a freeware product of AdobeSystems,Inc.)
✤ Do not connect the Camcorder to PC before installing the program.
✤ If another Camcorder or scanner is connected, please disconnect it in advance.
✤ This explanation is based on Windows
®
98SE OS.
1. Insert the software CD into the CD-ROM drive of your camputer.
Installation selection screen appears on the monitor.
2. If the installation selection screen does not appear after inserting the CD click “Run”
in the Windows “Start” menu and execute SETUP.EXE file to begin installation.
When CD-ROM drive is set to “D:drive”, type “D:/setup.exe” and press Enter.
3. Click the icons listed below to install the selected software.
■
DV Driver Click
USB removable Disk Driver (Windows
®
98SE only)
USB PC CAMERA & STREAMING Driver (VIDEO CODEC installed)
■
DirectX 9.0a Click
■
DV Media Click
A Video Codec for playing back MPEG moving pictures recorded by the camcorder or streaming data transferred through
the USB connection on a PC is installed. (A file recorded by another device cannot be played back.)
■
MS Formatter Click
A dedicated formatter for the Memory Stick only.
Program Installation
Installing DV Media Pro Program
3