Specifications
Table Of Contents
- SP-M200 SP-M220 SP-M250
- Table Of Contents
- 1 Major Safety Precautions
- 2 Installation and Connection
- 2-1 Package Contents
- 2-2 Installing the Projector
- 2-3 Leveling with Adjustable Feet
- 2-4 Zoom and Focus Adjustment
- 2-5 Screen Size and Projection Distance
- 2-6 Lamp Replacement
- 2-7 Rear Side
- 2-8 Supported Display Modes
- 2-9 Connecting the Power
- 2-10 Connecting with a PC and Setting up the PC
- 2-11 Connecting a PC using an HDMI/DVI cable
- 2-12 Connecting an HDMI-Compatible Device
- 2-13 Connecting an AV device using a D-Sub cable
- 2-14 Connecting an AV device with component output
- 2-15 Connecting using a Video cable
- 2-16 Connecting an External Speaker
- 2-17 Kensington Lock slot
- 3 Using
- 4 Troubleshooting
- 5 More Information
Installation and Connection 2-15
2-15 Connecting using a Video cable
Make sure that the AV device and your projector are turned off.
1.
Connect the AV device to the [VIDEO] port using a VIDEO cable (not supplied).
- For supported input signal formats, see AV Timing (VIDEO) in section 2-8, "Supported Display Modes".
2. Connect the [AUDIO IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device
using an audio cable (Not supplied).
Downloaded From projector-manual.com Samsung Manuals