SP-M205 SP-M225 SP-M255 SP-M275 SP-M305 LCD Projector Owner’s Instructions The color and the appearance of the product may differ from the illustrations in this manual. The specifications are subject to change without prior notice to improve performance.
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 INSTALLATION AND CONNECTION Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MORE INFORMATION Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 RS232C Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Correct Disposal - Europe only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual ICON NAME MEANING Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • The contents of this manual are subject to change without prior notice for performance improvement. • If a problem occurs, refer to the 'Troubleshooting' section.
1-2 Care and Maintenance Cleaning the Surface and the Lens Clean the projector using a soft dry cloth. • Avoid cleaning the product with a flammable substance such as benzene or thinner. • Avoid scratching the lens with your fingernails or a sharp object. This may result in scratches or damage to the product. • Avoid cleaning the product with a wet cloth or by directly spraying water onto the product. If water enters the product, it may result in fire, electric shock, or a problem with the product.
1-3 Safety Precautions Icons used for safety precautions ICON NAME MEANING Warning Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality. Caution Failing to follow the precautions marked with this sign may result in a personal injury or property damage. Meaning of Signs Do not perform. Must be followed. Do not disassemble. The power plug must be unplugged from the wall outlet. Do not touch. Must be grounded to prevent electric shock.
Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only). • Otherwise, it may result in electric shock or injury. Caution When unplugging the power plug from the wall outlet, make sure to hold the power plug by the plug and not by the cord. • Failing to do so may result in electric shock or fire. Unplug the power plug before cleaning the product. • Do not turn the product on or off by plugging or unplugging the power plug.
Do not install the product in a location exposed to dust, moisture (sauna), oil, Do not install the product in areas with heavy dust. smoke or water (rain drops) and do not install it in a vehicle. • This may result in electric shock or fire. Caution Take care not to block the vent with a table cloth or curtain. • Do not let the product drop while moving it. • Otherwise, it may result in fire due to internal overheating. This may result in a problem with the product or injury.
Caution If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service center. • Failing to do so may result in electric shock or fire. If the power plug pin or jack is exposed to dust, water or alien substances, clean it thoroughly. Do not use the product while it indicates a malfunction, such as no sound or no picture. • • There is a danger of electric shock or fire.
To avoid burning yourself, do not touch the vents or lamp cover while operating or right after turning off the product. Do not clean the product using water spray or a wet cloth. Avoid using any chemicals such as detergents, industrial or automotive polish, abrasive, wax, benzene, alcohol on any plastic part of the product such as projector case, since this may cause damage. Do not open any cover on the product. Do not use any undesignated battery.
2 Installation and Connection 2-1 Package Contents • Unpack the product and check if all of the contents listed below have been included. • Store the packaging box in case you need to move the product at a later date. Projector CONTENTS Quick Setup Guide Warranty Card (Not available in all locations) User Manual Power Cord Remote Control / 2 Battery Cleaning Cloth D-Sub Cable Lens cover ( Not available in all locations) 4 Screws Projector case (For ceiling mount bracket.
2-2 Installing the Projector Install the projector so that the beam from the projector is perpendicular to the screen. • Place the projector so that the lens aims at the center of the screen. If the screen is not vertical, the picture on the screen may not appear rectangular. • Do not install the screen in bright surroundings. If the surroundings are too bright, the picture on the screen will be washed out and not display clearly.
2-3 Leveling with Adjustable Feet Press the PUSH buttons, as shown, to adjust the legs and level the projector. The projector can be adjusted to a height of up to 1.18 inches (30mm, about 12 °) from the reference point. If is set to , is adjusted automatically. If fine tuning is required after auto-adjustment, use .
2-4 Zoom and Focus Adjustment Zoom Knob You can adjust the size of the image within the zoom range by manipulating the Zoom Knob. Focus Ring Focus the picture on the screen using the Focus Ring. The size of your screen determines the distance you set your projector from the screen. If you do not install your projector at the projection distance specified in the Screen Size and Projection Distance table in Section 2-5, you will not be able to adjust the focus correctly.
2-5 Screen Size and Projection Distance A. Screen / Z. Throw Distance / Y’. Distance from Lens Center to Image Bottom Install the projector on a flat, even surface and level the projector using the adjustable feet to obtain optimal picture quality. If images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward.
SCREEN SIZE M (DIAGONAL) X (HORIZONTAL) THROW DISTANCE Y (VERTICAL) Z (TELE) OFFSET Z (WIDE) Y' INCHES CM INCHES CM INCHES CM INCHES CM INCHES CM INCHES CM 240 609.6 192 487.7 144 365.8 341.8 868.1 284.2 721.8 19.9 50.4 250 635.0 200 508.0 150 381.0 356.0 904.2 296.0 751.8 20.7 52.5 260 660.4 208 528.3 156 396.2 370.2 940.4 307.8 781.9 21.5 54.6 270 685.8 216 548.6 162 411.5 384.5 976.5 319.7 811.9 22.3 56.7 280 711.2 224 569.0 168 426.
2-6 Lamp Replacement Cautions on Lamp Replacement • The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage time. You can view the lamp usage time in the Information Display (INFO button). • Replace the lamp with the one specified below only. Model SP-M205 / SP-M225 SP-M255 / SP-M275 / SP-M305 Lamp Model Name DPL3311U DPL3321U - For inquiries on lamp purchase, please see 'Contact SAMSUNG WORLDWIDE' in section 6-3.
Install a new lamp in the reverse order of removal. Replacing and Cleaning the Filter Precautions when replacing the projector filter: • The filter is on the side of the projector. • Turn off the power of the projector, and then disconnect the power cord after the projector has cooled sufficiently. Otherwise, its parts may be damaged due to internal heat. • When you replace the filter, you may release some dust.
Air outtake vent Air intake vent 2-6 Installation and Connection
2-7 Rear Side ICON NAME Kensington Lock slot PC IN port VIDEO IN port AUDIO IN (L-AUDIO-R) port HDMI/DVI IN port Remote Control Signal Receiver Power Input port AUDIO OUT/ port RS232C port LAN port USB port Installation and Connection 2-7
2-8 Supported Display Modes 2-8-1. PC Timing (D-Sub/HDMI) FORMAT 2-8 RESOLUTION HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) PIXEL FREQUENCY (MHZ) IBM 640 x 350 70Hz 31.469 70.086 25.175 IBM 640 x 480 60Hz 31.469 59.940 25.175 IBM 720 x 400 70Hz 31.469 70.087 28.322 VESA 640 x 480 60Hz 31.469 59.940 25.175 MAC 640 x 480 67Hz 35.000 66.667 30.240 VESA 640 x 480 70Hz 35.000 70.000 28.560 VESA 640 x 480 72Hz 37.861 72.809 31.
FORMAT RESOLUTION HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) PIXEL FREQUENCY (MHZ) VESA 1280 x 960 72Hz 72.072 72.000 124.540 VESA 1280 x 960 75Hz 75.231 74.857 130.000 VESA 1280 x 1024 60Hz 63.981 60.020 108.000 VESA 1280 x 1024 70Hz 74.620 70.000 128.943 VESA 1280 x 1024 72Hz 76.824 72.000 132.752 VESA 1280 x 1024 75Hz 79.976 75.025 135.000 VESA 1400 x 1050 60Hz 65.317 59.978 121.750 VESA 1440 x 900 60Hz 55.935 59.887 106.
FORMAT RESOLUTION SCAN HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) PIXEL FREQUENCY (MHZ) EIA-861 Format5 1920 x 1080 Interlaced 60.000 33.750 74.250 EIA-861 Format17,18 720 x 576 Progressive 50.000 31.250 27.000 EIA-861 Format19 1280 x 720 Progressive 50.000 37.500 74.250 EIA-861 Format20 1920 x 1080 Interlaced 50.000 28.125 74.250 2-8-4. AV Timing (VIDEO) NTSC, NTSC 4.
2-9 Connecting the Power 1. Plug the power cord into the power terminal on the rear side of the projector.
2-10 Connecting with a PC and Setting up the PC 2-10-1. Setting up the PC Environment Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Windows desktop, and then click [Properties]. The dialog appears. 2. Click the [Settings] tab, and then set the . The optimal resolution for the projector is 1024 x 768. For other resolutions supported by the projector, see the PC Timing Display Mode table in section 2-8.
5. Click the [OK] button to close the window, and then click the [OK] button on the window to close that window. 6. Shut down the PC and connect it to the projector. The setup process might vary depending on your type of computer or version of Windows. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) This projector supports 32 bit color quality (per pixel) when it is used as a PC monitor.
2-11 Connecting a PC using an HDMI/DVI cable Make sure that your PC and projector are turned off. 1. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied). - If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied). - For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-8, "Supported Display Modes".
2-12 Connecting an HDMI-Compatible Device Make sure that the AV device and your projector are turned off. 1. Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output device using an HDMI/DVI or HDMI/HDMI cable. - If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable.
2-13 Connecting an AV device using a D-Sub cable Make sure that the AV device and your projector are turned off. 1. Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable. - For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display Modes". 2.
2-14 Connecting an AV device with Component output Make sure that the AV device and your projector are turned off. 1. Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to Component cable (Not supplied). This cable has a D-Sub connector on one end and three RCA jacks on the other. - For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display Modes". 2.
2-15 Connecting using a Video cable Make sure that the AV device and your projector are turned off. 1. Connect the AV device to the [VIDEO IN] port using a VIDEO cable (not supplied). - For supported input signal formats, see AV Timing (VIDEO) in section 2-8, "Supported Display Modes". 2. Connect the [AUDIO IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device using an audio cable (Not supplied).
2-16 Connecting an External Speaker You can hear sound through an external speaker instead of the internal speakers built into the projector. 1. Obtain an audio cable (Not supplied) suitable for your external speaker. 2. Connect the [AUDIO OUT/ ] terminal of the projector to the external speaker using an audio cable. - When using an external speaker, the internal speaker does not operate but you can adjust the volume of the external speaker using the Volume button or the remote control of the projector.
2-17 Connecting to a Network This product can use network functions. Refer to the following Network connection method. 2-17-1. Connecting to a Dynamic IP (DHCP) Network You can attach the projector to your network through a modem that uses DHCP (Dynamic Host Configuration Protocol). When you use a DHCP modem, the modem automatically provides the IP address, subnet mask, and gateway values that the projector needs to access the network. To connect to a DHCP network, follow these steps : 1.
2-17-2. Connecting to a Static IP Network You can attach the projector to a network that uses a Static IP address, which corresponds to using a dedicated lease line. If your network uses Static IP addresses, you must get the IP address, subnet mask, and gateway values from your Internet Service Provider (ISP), turn on the Network function in the projector's Menu, and then enter the values into the Network function manually. To connect to a Static IP address network, follow these steps : 1.
2-18 Kensington Lock slot The Kensington Lock slot allows you to lock your projector, providing a sense of security when you use it in a public place. Because the shape and usage of the lock may differ depending on the model and the manufacturer, see the User Manual supplied with the locking device for more information. Locking the product 1. Loop the Kensington lock cable around an immovable part of desk or heavy object as directed in the Kensington lock user manual. 2.
3 Using 3-1 Product Features 1. An optical engine adopting new LCD technology • 1024 x 768 resolution. • 3P-LCD panel. • SP-M205 : Provides a bright, 2000 ANSI lumen screen. • SP-M225 : Provides a bright, 2200 ANSI lumen screen. • SP-M255 : Provides a bright, 2500 ANSI lumen screen. • SP-M275 : Provides a bright, 2700 ANSI lumen screen. • SP-M305 : Provides a bright, 3000 ANSI lumen screen. 2.
3-2 Front, Upper ICON NAME DESCRIPTION - STAND BY (Blue LED) Indicators - LAMP (Blue LED) - STATUS (Green/Red/Yellow LED) Refer to the LED Indications. Move Volume / Select button / : Use to move or to select an item within a menu. : Use to adjust the volume. MENU button Use to display the Menu Screen. SOURCE button Use to select the external device signal. POWER button Use to turn the projector on or off. Zoom Knob Use to enlarge or reduce image size.
3-3 Remote Control Using your projector with another remote control device nearby may result in improper functioning due to remote control code (frequency) interference. Using POWER ( ) Button Use this button to turn the projector on and off. QUICK Button Use to quickly return to the last menu used. P.MODE Button Use to select Picture Mode. AUTO Button Automatically adjust the screen. (Only enabled in mode.) P.SIZE Button Use to adjust the size of picture screen.
• Make sure to place your remote control on a table or desk. - If you step on the remote control, you may fall and hurt yourself or damage the remote. • You can use the remote control up to a distance of about 32.8 feet (10 m) from the product. Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Insert two AAA size batteries. 3. Close the cover.
3-4 LED Indications LED Indications :Light is On STATUS :Light is Blinking LAMP :Light is Off STAND BY STATUS If you press the [POWER] button on the remote control or projector, the screen appears within 30 seconds. The projector is operating normally. The projector is preparing an operation after the [POWER] button on the projector or the remote control has been pressed.
Clearing Indicator Problems CLASSIFICA TION Action 1 Action 2 STATE MEASURES The cooling fan system is not operating normally. If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact your product provider or our service center. The lamp cover protecting the lamp unit is not properly closed or the sensor system is not operating normally. Check if the screws on the side of the projector are securely tightened.
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure To access the Menu, press the Menu button on the product or on the remote. To move in the menu, press the arrow buttons. Menu selections with an arrow on the far right have sub-menus. Press the right arrow button to access the sub-menu. Directions for navigating and selecting items in a menu are at the bottom of each menu screen.
MENU Mode DESCRIPTION Select a screen mode to match the environment, the kind of images you are projecting, or select a customized mode you have created based on your requirements. • : Selects the picture for increased definition in a bright room. • : Selects the picture for the optimum display in a normal environment. • : This mode is suitable for presentations. • : This mode is suitable for text work.
MENU Position DESCRIPTION Using this function, you can adjust the screen position if it is not aligned. To adjust, select the direction you want to move the screen, and then press the arrow button pointing in that direction repeatedly. This function does not work in mode. Digital NR If dotted lines appear in an image or the screen shakes, enabling Digital NR (Noise Reduction) can improve the quality of the picture.
3-5-3. Setup MENU DESCRIPTION Install To tailor the picture to the installation location, (for example, behind a semi-transparent screen, hanging from the ceiling), you can invert the projected images vertically / horizontally.
MENU DESCRIPTION Video Type If the screen quality is abnormal as a result of the projector not identifying the input signal type automatically in or mode, Video Type lets you manually set the input signal. This function does not work in mode. • In mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V sync, it is only enabled for a 1280 x 720p 59.94Hz/60Hz signal. • In mode,
MENU DESCRIPTION Network By connecting a LAN cable between the PC and projector, you can use the following supplementary functions on your PC. On your PC, you can check the projector's condition (lifespan of the lamp, operation error, temperature) and remotely control the projector's power On/Off, brightness, and sound On/Off . : - • : Automatically allots the IP address, Subnet mask and Gateway.
MENU Language Menu Option DESCRIPTION Using this function, you can select the language used for the menu screen. • : You can move Menu Position up/down/left/right. • : You can set the translucency of the menu. • • --- : You can set the display time of the menu. • Sound The projector comes with an internal 7W (mono) speaker. Use the settings below to tailor the sound as desired.
3-6 Network Management 3-6-1. Management using the Web Browser The Web Browser lets you monitor and control one projector from a PC without installing any software. Before you can use the Web Browser, you must connect your projector to your local area network. For directions explaining how to connect to a network, see section 2-17, Connecting to a Network. To control multiple projectors from a single PC, install and run Samsung Projector Manager.
3-6-2. Projector Management using PC Software You can monitor and control more than one projector using Samsung Projector Manager. When installing or using Samsung Projector Manager in PC, you must log in as Administrator. If you log in using your personal login, that login must have full administrator privileges.
, and then select . • Specify the , and to register, and then press . Any group whose name is not specified will automatically be named . To remove and / or rename a registered projector, right-click and then select and / or respectively. If a projector is not displayed on the after registration, check if the network connection and the network settings are properly configured.
• Projector Management • You can check a projector's lamp condition, temperature, operation, errors, etc in real time. : You can view a projector's Name, IP Address, Group, Power On/Off status, LAMP lifespan, operation errors (represented by icons), etc. in real time. Samsung Projector Manager displays icons that indicate a projector's status. The icons are listed in the tables below. If the icons indicate a problem with your projector, see "Clearing Indicator Problems" in secton 3-4, LED Indications.
ICONS STATUS STATE ACTION Warning The air filter has reached the end of its life. The air filter needs to be replaced. Warning The air filter has been blocked by dust. The air filter needs to be cleaned. Error The air filter has been blocked by dust. The air filter needs to be cleaned. Temperature Level Status Icons ICONS • STATUS STATE ACTION Temperature status The projector's internal temperature is normal.(standby mode) None. It's normal.
(Switch Source): Selects a source from HDMI, S-VIDEO, AV, PC, MP. (Blank Off/Blank On): Turns the screen of the projector on or off. (Mute Off/Mute On): Mutes the sound of a projector on/ off. (Adjust Aspect Ratio): Adjusts the aspect ratio of the projector to either 16:9 or Normal. • If the connected source does not have the feature, is not available in the Source list. • If the projector does not have an [S-VIDEO IN] terminal, the source is unusable.
1. Press the button. The New Schedule screen appears. 2. Select the projectors to apply the new schedule to from the
