900 DSP Phone GG68-00356B 03/04. Rev.1.
Overview of Main Features ÀÀ ;; @@ ;; @@ ÀÀ WIDE-900Mega Phone Experience the following various functions. Base set Russian Display Function Remote set A big screen composition that supports full graphic and Russian will allow you to use it easily (You can select a desired display screen). Dialed Number Function You can check the last dialed number. You can check the recorded messages with the remote set. Screen Display A big screen composition will allow you to use this product easily.
Contents Preparations and Installation Advanced Functions Advanced functions for making calls Overview of Main Features 2 Contents/Components 4 Product Overview 6 To make a call to the number you once dialed (Make a call after searching the last dialed number) 34 Telephone Installation 8 To delete the dialed number (called number) Transfering the call to another number during a call (Flash) Telephone Basics Making/Answering Calls Setting the Date and Time Transferring a Call Making Extension Ca
Product Overview Used to search the directory Base set Used to search the last dialed number Hook Switch Remote set Antenna Antenna Used to play/stop messages, or stop function setting Displays the battery charging/discharging state.
Telephone Installation Base set Installation Placing the battery in the remote set Open the Telephone Connection DC 12V 500mA 1 battery lid. Put the battery Put the battery shown in the to the upper 2 aspicture. 3 tight part as shown in 4 the picture. Connect the telephone to a 220V outlet. How to use battery? ● After installation, pick up the handset and make it sure that dial tone is transmitted. ● If there is no dial tone, check the connections of the telephone line and the power line.
Telephone Basics Making/Answering Calls Setting the Date and Time Transferring a Call Making Extension Calls Selecting the Base set Ringer Type Selecting the Remote set Ringer Type Registering the Morning Call Using the Auto Answering Registering the Directory Searching the Directory Editing the Directory Using the Directory (Making Calls) Using the Directory (Delete) 10 12 14 15 16 18 19 20 24 26 28 30 31
Making Calls Answering Calls Answering a call with the base set Making a call with the base set (in the standby state) Making a call with the handset Making a call over the speakerphone. With the handset When finished taking With the speakerphone Place the handset on the base set, or press button if you have talked over When the telephone rings the speakerphone. Press Pick up the handset, dial the desired telephone number, and talk. button, dial the desired Pick up the handset and talk.
Setting the Date and Time (current date and time) ● If you set the current date and time, you can check the time when messages are recorded on the auto answering machine and activate the morning call. ● In case of power failure, the date and time is cleared. So, set the date and time again. Setting Order (Press the buttons in the following order.) 1 2 3 4 5 Setting is completed. �Press button Press 8 digits in the order of day, month, hour, and minute. in the standby state.
Making Extension Calls Transferring a Call ● You can make a call between the handset or speakerphone of the base set and the remote set even when the line is not busy. At this time, the call is not charged. Transferring a call to Making an extension call from 1 While the base set is busy (handset call) � 2 � 3 When the extension rings, place the handset. 1 � � When the extension rings, press button. When the extension rings ● If the remote set is not on the charger, press button and talk.
Selecting the base set ringer type Selecting the ringer type Press the buttons in the following order. 1 2 ● There are 10 types of ringers. 3 4 5 The selected ringer sounds. ● Press to to listen to the ringers, and select the desired number. ∙Press the button in the standby state. ● The current ringer sounds. ● Select to off the bell sound of both base and handset units. Only LED flicker. Make it sure to adjust the tone with the handset on the base set.
Selecting the remote set ringer type Registering the morning call ● There are 3 types of ringers. Selecting the ringer type 1 The selected ringer sounds. 3 2 (in the standby state) After beep sound, the remote set turns to the standby state. � � Registering the time for morning call (in the standby state) 1 2 3 4 5 Press the desired number. Registering the time Adjusting the ringer volume. Ex) 6:30 You can adjust the ringer volume either as High or Low.
Using the Auto Answering ● It is convenient if you use the auto answering when you go out. Activating the auto answering (in the standby state) ● Press (Delete the messages after checking them.) Delete ALL button. ● When the auto answering function is activated, ANSWER button lights on and the auto answering greeting message is transmitted. ● To stop it, press Deleting the recorded voice messages button again. � � � �Delete?� is displayed on the screen.
Using the Auto Answering (Continued) ● The auto answering is available only with the base set To record the auto answering greeting message 1 2 (in the standby state) 3 4 You will then hear a beep tone along with a recorded voice. ● Press and hold RECORD GREETING until the unit beeps. To stop ● To stop recording ● Press button. ● The recorded message is played once. ● Record the message (up to 20 seconds). Mike If the message is not recorded ▶ The message is too short (less than 3 seconds).
Registering the Directory ● Register telephone numbers that you use frequently. ● You can register up to 100 telephone numbers (to the base set) (20 to the remote set). Registering the directory with the base set 1 2 3 (Press the buttons in the following order.) 5 4 6 7 Enter the name. ● Press the ● Select the desired letters from the display screen using , , and button in the standby state. buttons, and the press ● Enter the telephone numbers, limiting the number of digits to 32. button.
Searching the Directory Searching the telephone number by name Searching the telephone numbers in order 1 2 3 1 Select the desired telephone number by pressing and buttons. 2 3 ∙ Select the first letter of the desired name in the display screen using , , and ∙The telephone numbers are displayed always from the one in Address 1. 1 2 3 4 5 Or buttons, and then press button or button. Select the desired telephone number by pressing and buttons.
Editing the Directory Editing the directory with the remote set Editing the names/numbers stored in the directory with the base set 1 2 3 When the desired telephone number is displayed, press VOLUME button. ※ See Searching the Directory. 2 3 ● Delete the existing name with Press button when To edit the name only button three times consecutively. ∙Only the name is edited and then editing is finished. button and enter a new name.
Using the Directory (Making Calls) Using the Directory (Delete) Making a call from the directory 1 Standby State See Searching the Directory Deleting the Directory (in the standby state) 2 Or 3 Select the desired name or telephone number, and then pick up the handset or press button. Deleting the selected number 1 See Searching the Directory 2 Select the name or telephone number to be deleted. You can talk to the other party when the call is connected. Delete ALL 3 1 Press VOLUME button.
Advanced Functions ■ Advanced functions for making calls To make a call to the number you once dialed (Make a call after searching the last dialed number) To delete the dialed number (called number) Transfering the call to another number during a call (Flash) 34 34 34 ■ Advanced Functions Available during Calls Recording the content of calls (Base set) Pause during calls (Hold function) 35 36 ■ Advanced functions for Auto Answering Functions used for auto answering Checking the caller’s voice (Caller Id
Advanced Functions for Making Calls Advanced Functions Available during Calls To make a call to the number you once dialed (Make a call after searching the last dialed number) You can make a call without dialing the number, by Base set searching the Standby State number with button. 1 2 Recording the content of calls (Base set) 3 4 Or Search the telephone number with which you want to make a call, by pressing and buttons. Dialed Number Pick up the handset or press button.
Advanced Functions Available during Calls Advanced Functions for Auto Answering Pause during calls (Hold function) Functions used for Auto Answering To resume the call ÀÀ ;; @@ ;; @@ ÀÀ Busy � When using the handset � These functions are set as default when the auto answering function is used. 1. Voice message record time (Time when the message is recorded by the callers) ● The time allowed for the caller to leave a message on the auto answering machine is 3 minutes.
Advanced Functions for Auto Answering Advanced Functions for Auto Answering Table of functions available from the outside (Remote Control) Selecting the auto-answering ring count (when setup) � � � � To use these functions � Press the following button After the number of received messages is announced, the messages are played.
Help Function Help Function Display Screen Selection Adjusting the flash time (In the standby state) You can adjust the flash time. This function allows you to change the display screen in the base set standby state � � � � � Toll Restriction 1 2 3 ● The flash time is to 0.4 second as default. � Press the button corresponding to the desired time. � � : 0 . 1 sec : 0 . 2 sec : 0 . 3 sec : 0 . 4 sec : 0 . 5 sec : 0 . 6 sec : 0 . 7 sec : 0 . 8 sec : 0 . 9 sec : 1 .
Help Function Help Function Registering the additional remote sets (In the standby state) To reset the telephone to the initial state (Reset) 1 This function refers to resetting the telephone to the default state. � � Base set LCD displays �Reset is in progress�, and the unit turns to the standby state. Remote set Standby State In the standby state, and press at the same time.
Note ÀÀ ;; @@ ;; @@ ÀÀ ;; @@ ÀÀ ■ Anything wrong with the telephone? 46 ■ Precautions for Safety 48 ■ Product Care 49 ■ Product Specification 50 ■ Features Summary 52
ÀÀ ;; @@ ;; @@ ÀÀ ;; @@ ÀÀ Anything wrong with the telephone? The telephone does not work at all. ● Make it sure that the telephone is correctly installed. (See Page 8) ●Make it sure that the adaptor is properly installed according to the specified voltage. (See Page 8) ● Make it sure that the the battery is correctly placed in the remote set.
Precautions for Safety Product Care This is the instructions for protecting the user’ s safety and preventing the property loss. Power-related Power-related Do not use the damaged or frayed power cord or plug or the loose outlet. ●Ther is a danger of electric shock or fire. Do not pull out the cord to take it out, or do not touch the power plug with wet hand. ●Ther is a danger of electric shock or fire. Do not bend the power cord too much or do not allow anything to rest on it.
Product Specification Model Name: SP-C802R Specifications Items Frequency range 904.0125Mhz ~ 904.9875Mhz 814.0125Mhz ~ 814.9875Mhz Channel 40 Channel separation 25KHz Output power 10mW or less Modulation FM Duration Waiting : 20 hours or longer Connected : 3 hours or longer Operating temperature Operating humidity Items Weight (g) Remote Base Chager 170 750 107 Sizw (mm) Power 50 3.
Features Summary 2.Register Displays �Delete?� 3.Delete Only with the button input, the screen displays in Russian. So, you can use this product even without the manual. 4.Registering the remote set Base set Telephone Number Input Name Input remote set number remote set number 1.Morning Call 1.Check 5.Dialed number 2.Set 3.Cancel 4.Register 2.Delete Displays �Delete?� 1.Message 6. Auto Answering Deletion Displays �Delete?� Time Input 2.Telephone 1.Flash -related Functions 2.Ringer Type 2.
MEMO Functions available at the remote set Registering the telephone numbers with the directory function Register a telephone number Page. 24-2 5 Registering the telephone numbers To check the recorded message with the remote set Page. 39 Selecting the remote set ringer type Page. 1 8 Page. 1 8 Adjusting the ringer volume How to register to the base set Page. 4 3 Press the same 2-digit registration number with that of the base set.
MEMO 56 MEMO 57
