900 MHz Phone SP-C700R GG68-00405E 03/10. Rev.1.
Safety Precautions The following is to ensure the user's safety and to minimize potential damages. Carefully read the following guidelines and use in accordance with the instructions. Note Warning Note Never pull out the power plug by pulling the line or when your hands are wet. When you see this sign, it indicates a warning that something can cause death or serious injury. Do not fold the power line or leave it under heavy objects. ● It can cause electric shock or fire.
Overview of Major Features WIDE 900 MHz Phone ● Here are some instructions concerning various functions of the phone. Base Set Remote Set page 28 Recent call function Setting function You can easily search and redial the most recent numbers you called without dialing them up again. (Up to 10 calls) You can set and manage your own settings for various phone functions. page 22 Morning call/alarm function This button will set an alarm to sound at a certain time.
Convenient features Safety precautions 1 Overview of major features 3 Help functions Convenient features for making calls 28 Selecting Pulse / Tone Dial Type 30 5 Deleting the recently dialed number 28 Noise reduction 31 Product information 7 Out of range warning 31 29 Phone installation 9 Blocking a user from making long distance calls Low voltage warning 31 Dialing another number after a call (Flash) 29 Adjusting the Flash Time 31 Pause function 30 Initializing the phone 32
Product Introduction Remote Set � Use it for redialing the last number you called. Antenna Speaker Preparation & Installation Base Set ●Screen Displaying � Use it for searching or registering numbers in your own phone directory ( up to 20 numbers ). � Use it for redialing the last number you called. � Use it to navigate upward when moving and searching through the menu. � Use it to navigate downward when moving and searching through the menu.
Installing the Base Set Loading the battery to the remote set Connect the phone line. Open the Place the Rearrange the picture. shown in the picture. Close the as by setting 4 battery cover. 3 line 1 battery cover. 2 battery shown in the the battery as DC 12V 500mA Connect the power plug to 220V. � When you have finished installing the base set, press“On Hook ”button and check for a dial tone. � If you cannot hear a dial tone, then check both the power and phone line connections.
Basic Features ■ Making calls 13 ■ Answering calls 14 ■ Date / Time setting 15 ■ Using the intercom function 17 ■ Transferring calls 18 ■ Changing the ringing melody and 11 adjusting the voice volume 20 ■ Morning call / alarm setting 22 ■ Using the phone directory 23 12
Making Calls Answering Calls Answering a Call with the Base Set Making a Call with the Base Set When using the base-handset When using the On Hook � When hanging up the phone � Basic features Press button and dial the number you want to call. When calling in standby mode Pick up the base-handset and dial the number you want to call. � You can get a dial tone in 3 seconds. � ● You can switch from pulse to tone mode by pressing Place the handset down on its position.
Date/Time Setting ● You need to setup the Date/Time feature in order to see the current time and to use the Morning Call/Alarm function. ● Only the hour and minute setting is available on the base set. Setting up the Base Set 1 2 3 4 5 You will hear a beep confirming the completion of the setting. �Press 4 digits in the order of hour, and minute. Setting up with the Remote Set 1 2 3 4 5 Displaying You will hear a beep confirming the completion of the setting.
Using the Intercom Function Transferring Calls ● Separating from external calls, you can use intercom function between the base set ● While talking you can transfer the call either to the base set or to the remote set. and the remote set. In this particular case the calls are not charged. Calling from 1 to 2 How to transfer from 3 to 4 Remote set Basic features Base Set 1 Base Set or When the internal call is connected, pick up the handset to talk.
Transferring Calls Changing the Ringing Melody and Adjusting the Voice Volume (continued) ● You can adjust the type and volume of ring tone melodies as you please. Base Set to 1 2 Remote set ●Transferring from the Selecting the Ringing Melody 1 3 2 remote set to the base set Remote Set While talking �The current melody will ring and the number of the melody will be displayed. ● 4 5 5 Displaying � 3 4 You will hear a beep confirming the completion of the setting.
Changing the Ringing Melody and Adjusting the Voice Volume (continued) Morning Call/Alarm Setting ● First, set the current time (see page 15 for more details) ● You can only setup the morning call/alarm on the base set. ● When you set the morning call/alarm, it will give you a wakeup call at a certain time. Remote Set Selecting the Ringing Melody 3 2 4 1 5 Displaying 3 4 Displaying Time Setting 2 You will hear a beep confirming the completion of the setting.
Using the Phone Directory ● You can register up to 20 phone numbers on the base set. Registering a Phone Number (Using the Base Set ) 1 2 3 Making a Call from the Phone Directory (Using the Base Set ) 2 1 4 3 You will hear a beep confirming the completion of the setting. �Press button. �Press button. (You can use up to 20 digits) �Press button and select the phone number you want Press button or pick up the handset.
Using the Phone Directory (continued) ● You can register up to 10 phone numbers in the remote set. Making a Call from the Phone Directory (Using the Remote Set ) Registering a Phone Number (Using the Remote Set ) 1 2 1 5 4 3 2 3 You will hear a beep confirming the completion of the setting. �Press button. �Press button and select the phone number you want �Press (You can use up to 20 digits) button. Basic features Enter the phone number.
Convenient Features for Making Calls You can call the recently dialed numbers without redialing by yourself. To Redial a Number 1 Convenient Features Base Set in standby mode � Press button Press Blocking a user from making long distance calls Dialing another number after a call (Flash) Pause function button � Pick up the handset. (You can press button and then pick up the handset.) Press button to search for the recently dialed numbers.
Convenient Features for Making Calls Convenient Features for Making Calls / Help Functions To Block Long Distance Calls (Using the Base Set ) 1 2 3 Dial Pause (Using the Base Set /Remote Set ) 4 5 Displaying � Base Set in standby mode � � � 1 This function is used for making external calls within the internal switchboard.
Help Functions Help Functions This is to initialize the phone to its original condition. Noise Reduction (Using a Remote Set ) Initializing the Phone (Base Set / Remote Set ) 1 2 � When there is a lot of noise 1 Press 2 3 ∙If the noise is not reduced, press the button several times.
Help Functions Registering the Remote Set (Using Base Set / Remote Set) 2 Base Set in standby mode � 3 � 4 Displaying � 5 � ~ 1 6 � � Reference Press the two digits you want. Remote Set in standby mode 8 � 9 � Displaying 10 � 11 � ~ 7 12 � Enter the same two digits as you did in the base set. Wait a few seconds and you will hear a beep confirming the completion of the registration.
Troubleshooting ●Is the phone correctly installed? (Refer to page 9) ●Is the power correctly connected to the appropriate voltage? (Refer to page 9) ●Check if the batteries are correctly inserted to the remote set. (Refer to page 10) ●Check if the batteries are adequately charged. (Refer to page 10) ●Check if the power is on. (Refer to page 9) I cannot hear the tone when I press button. ●Check if the phone is correctly connected. (Refer to page 9) ●Check if the power is correctly connected.
How to Clean When cleaning the outer side of the phone. Apply neutral washer liquid and wipe it with a cloth. ●Do not use benzene, thinner, etc. Product Specifications When cleaning charger Frequently wipe the charging connector. Model name : SP- C700R Classification Unit Power V Remote Set Base Set Charger DC 3.
MEMO
MEMO MEMO