Specifications

Samsung SRP-350 Setup & Service Information Driver Installation Information • 3
Windows 98 SRP-350 Driver Installation
You can download the compressed SRP-350 driver, 350_130_2K.zip, from the dealer area of
the CRS site, www.crs-usa.com. Unzip (extract) the file SRP350.drv.
1. Select Start, then Settings, and then Printers.
2. From the printers dialog, right click the Add Printer icon.
3. From the Add Printer wizard window, click Next.
4. Choose Local Printer, click Next.
5. Click the Have Disk command button. From the Install From Disk dialog box, click
the Browse button to locate the driver file SRP350.drv. Click OK. The wizard
displays the list of available drivers for the SRP-350.
6. Select a driver from the table that follows and click Next.
Driver Description
SRP350 No cut Use with SRP350 – no paper cut
STP130 No cut Do not use
OM8324 No cut Do not use
SRP350 Partial cut Use with SRP350 – partial paper cut
STP130 Partial cut Do not use
OM8324 Partial cut Do not use
SRP350 No cut & Bel Use with SRP350 – no paper cut and sounds auto
paper beep when data is sent to printer – requires
version 1.19B EPROM installed in SRP350.
SRP350 Partial cut & Bel Use with SRP350 – partial paper cut and sounds
auto paper beep when data is sent to printer –
requires version 1.19B EPROM installed in
SRP350.
7. Select the port to which the printer will be connected and click Next.
8. Enter a printer name and select whether you want your windows based program to use
this printer as the default printer. Click Next.
9. Select whether you wish to print a test page and click Finish. The printer driver
installation is complete.