Real-time Network Dynamic 10X Pan & Tilt 10X PTZ Network Camera SNP-1000A User’s Manual Thank you for purchasing a SAMSUNG iPOLiS Network Camera. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Preface A brand that is integrated into Samsung's network products, stands for a convenient world (Polis) made safe (Police) through Samsung's superior network performance(Internet protocol). With products' clear digital images transmitted over the internet, real-time monitoring is possible anywhere with an internet connection. Easy remote control functions and the use of existing networks minimize installation costs. With , experience a world of convenience connected anytime, anywhere.
Contents Contents Preface .............................................................................. i Contents ...........................................................................1 Note to User .....................................................................5 Product Warranty and Limitations ....................................8 Warning Symbols .............................................................9 Danger..............................................................................
10X PTZ Network Camera SNP-1000A 3.3. Network configuration and connection method .......32 3.3.1. Configuration/connection using Web page ............. 32 Ch4. How to Use Web Viewer...............................................37 4.1. How to Use Web Viewer..........................................38 4.1.1. Login ...................................................................... 38 4.1.2. Web Viewer screen ................................................ 39 4.1.3. Area Zoom guide.....................
Contents 5.2.4. Exposure................................................................ 75 5.2.5. Back Light .............................................................. 76 5.2.6. AGC ....................................................................... 77 5.2.7. SSNR (Samsung Super Noise Reduction) ............. 77 5.2.8. Day & Night............................................................ 78 5.2.9. Others .................................................................... 79 5.3.
10X PTZ Network Camera SNP-1000A 5.5.5. Area Name ............................................................. 93 5.5.6. PTZ Position .......................................................... 94 5.5.7. Language ............................................................... 94 5.6. Initialization Setting .................................................95 5.7. Status.......................................................................96 Ch6. Troubleshooting ............................................
Note to User Note to User This machine’s electromagnetic waves have been registered as suitable for business purposes; the retailer and consumer should be aware of this registration. If in the case of wrongful purchases, please exchange the product for a home use product.
X PTZ Network Camera SNP-1000A Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
Note to User Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
10X PTZ Network Camera SNP-1000A Product Warranty and Limitations The manufacturers of this product do not take any responsibility for this product; therefore, the manufacturer does not authorize the third-party, but allows that retailer is responsible. The product warranty does not extend to cover accidents, negligence, abuse, or wrongful use for the whole or any part of the product. Additionally, the manufacturer does not provide warranty for any additional parts or affiliations.
Warning Symbols Warning Symbols Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Danger : Misuse or wrongful operation of the product may result in death, injury or bring about other fatal results. It indicates absolute caution when operating. Caution : Misuse or wrongful operation of the product may result in slight injury or damage to the product. It indicates caution when operating.
10X PTZ Network Camera SNP-1000A y There is risk of shock or fire; be sure to avoid setup in places with high humidity. y To prevent shocks, please connect the ground wire. y Do not install the camera on a surface that can not support it. y Unless the surface is suitable, it could cause falling or other hazards. During Use y When opening the product cover, there is a risk of electric shock. Only a professional should open the cover.
Caution y Random replacement of built-in battery by other types of batteries may cause explosion. The battery shall be replaced by the same battery. The lithium battery incorporated in this product is not user replaceable. Replacement of the lithium battery will be done by a trained technician. For information on its replacement, please contact your service provider. y The used batteries shall be disposed carefully because they can cause environment pollutions.
10X PTZ Network Camera SNP-1000A y Do not install under unstable lighting conditions. Severe lighting changes or flickering may hinder normal camera operation. y Do not drop the camera or subject it to physical shock. May cause a product malfunction. y Never keep the camera face to strong light directly. May damage the CCD. y Avoid touching the camera lens. The lens is the most important component of the camera. Be careful not to smear it with fingerprints.
C h 1.
10X PTZ Network Camera SNP-1000A 1.1. 10X PTZ Network Camera SNP-1000A Introduction The SNP-1000A is a high-tech network camera that uses MPEG-4 codec technology to allow high compression rates and clear picture quality by allowing for high frame rates to be transmitted through the network. By using the network, remote connection, monitoring, and control is possible from any location for simple use; additionally, set-up requires only a network.
1.2. Features • Auto Swing Pan or Tilt is operated in sequence between 2designated positions. • Group Search • Tour Search Maximum 128 Preset positions are toured in order. Maximum 6 Group Search functions are toured in order. Proportional P/T Even when the Zoom-In function is On for the Pan and Tilt speed correction function linked to the zoom position, fine manual operation is possible.functions are toured in order.
10X PTZ Network Camera SNP-1000A 128 Preset Position A maximum of 128 Preset positions can be set up. This function enables users to set up the monitoring place any time. Digital Flip When you want to monitor the moving object below the camera, you can execute the Digital Flip. The moving object can be monitored without screen reverse. Area Masking For privacy protection, a maximum of 4 areas can be masked among the surveillance areas preventing them to be displayed on the screen.
C h 2.
10X PTZ Network Camera SNP-1000A 2.1. Body 2.2.
2.3. Connection to external terminal 2.3.
10X PTZ Network Camera SNP-1000A Alarm Connection Terminal 20 PIN NO. NAME #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 S1 S2 G +V NO NC CM Purpose Not Used. Not Used. Not Used.
C h 3.
10X PTZ Network Camera SNP-1000A 3.1. Components and Accessories Accessories Products Sold Separately The following products are provided separately. y Accessory Housing - Wall Type Mount : STB-280PW - Wall Type Mount : STB-230PW - Dome Housing : STH-1000PI Note 22 See pages 26 for product images.
3.2. Installation 3.2. Installation 3.2.1. Preparation for Cable To install and use the SNP-1000A, the following cables should be used. y Power Adapter Cable The cable connected to the power input terminal of SNP1000A is shown below with a rated voltage of DC 12V 4A. y Video Cable The BNC cable shown below is connected to the video output terminal and the monitor of SNP-1000A.
10X PTZ Network Camera SNP-1000A y Lan Network Cable The cable connected to the network device of SNP-1000A for Network communication is shown below. Note Video cable and LAN network cable are not provided in this product’s package. BNC connection terminal can optionally be used to connect when the Analog output is necessary. 3.2.2. Cable Connection 1. First, connect one end of the BNC video cable connector to the Video Output Terminal. 2.
3.2. Installation 3. For the network connection of the SNP-1000A, connect the LAN Cable as the figure below shows. 4. Then, connect the Power Adapter Cable. Use a driver (-) to screw one part of the Power Adapter consisting of two lines to the Power Input Terminal of the camera holder. 5. Connect the Power Adapter’s plug to the Power Outlet.
10X PTZ Network Camera SNP-1000A 3.2.3. Installation of SNP-1000A Precautions for Installation Check that the installation location can safely bear four times the weight of the camera and its installation fittings. When fixing the ceiling installation bracket, use the supplied installation template and fixing screws. Take care not to drop the product during installation. Do not allow anyone to stand below the installation area.
3.2. Installation 3.2.4. Installing the SNP-1000A on a Ceiling 1. Prepare the accessories in the camera box (power adapter, installation template, audio extension cable, 1 loose-proof screw, 3 installation bracket fixing screws, 2 installation brackets, installation cover, installation CD) and a tool for making a hole in the ceiling. 2.
10X PTZ Network Camera SNP-1000A the template so that the front of the template is in line with the camera direction. Caution: Since there is a danger of the product falling during installation, take care not to allow anyone to stand below the installation area. 3.
3.2. Installation 3.2.5. Installing the SNP-1000A Wall Mount 1. Prepare the accessories in the camera box (power adapter, audio extension cable, 2 installation brackets, 1 loose-proof screw, installation CD, installation cover) and the wall mount(STB280PW or STB-230PW) and 3 installation bracket fixing screws in the mount packaging box. 2. Fix the wall mount (STB-280PW) with 3 screws to the wall where the camera is to be installed, as shown in the figure on the right.
10X PTZ Network Camera SNP-1000A the template so that the front of the template is in line with the camera direction. Caution: Since there is a danger of the product falling during installation, take care not to allow anyone to stand below the installation area. 3.
3.2. Installation 5. To complete installation, rotate the installation cover along the groove of the ceiling attachment bracket, and fix it. 3.2.6. Installing the Dome Housing (STH-1000PI) To install the Dome Housing (STH-1000PI), fix it instead of installing the cover in the last step “3.2.4. Installing the SNP-1000A on a Ceiling” on page 27 and “3.2.5. Installing the SNP-1000A Wall Mount” on page 29.
10X PTZ Network Camera SNP-1000A 3.3. Network configuration and connection method 3.3.1. Configuration/connection using Web page Use when there is one 10X PTZ Network Camera SNP-1000A to be installed. 1. Please connect user’s PC to 10X PTZ Network Camera SNP1000A using cross cable. 2. To configure network, the internal IP must be registered in the user’s PC.
3.3. Network configuration and connection method 3. After pressing internet protocol (TCP/IP) properties, press the ‘advanced’ button to go into advanced configurations. 4. The IP address of IP setting tap can be added as "192.168.1.XXX" "XXX" is an IP address voluntarily set by a customer. 5. Please launch a Web browser on user’s PC and enter [192.168.1.100] in the URL address field and push button. Connect to Webviewer login window of 10X PTZ Network Camera SNP-1000A. 6.
10X PTZ Network Camera SNP-1000A Note 7. 34 Default value is ID : admin, PW : 11111111 Please configure according to the network environment where 10X PTZ Network Camera SNP-1000A will be installed and push button to save the configuration.
3.3. Network configuration and connection method ① LAN / xDSL/ DHCP Configuration Item LAN Use xDSL Video Quality Description When network product is connected to normal local LAN or when connected to static IP, the network data to be allotted to the IP is configured. When using xDSL dynamic IP, enter the ID and PW. When automatically receiving IP through DHCP server, the DHCP functions are activated. ‘DHCP’ is used in the LAN environment where the DHCP is activated.
10X PTZ Network Camera SNP-1000A Note 36 Use SWR changes its IP address every time the user attempts to connect to the ISP and when the product is connected to a cable modem or xDSL modem. In this case, the user cannot know the changed IP address. When a product that uses dynamic IP is registered on the DDNS server, when wishing to connect to the product, the changed IP address can be easily recognized. In order to register the IP address to the DDNS server, set Use SWR as Enabled.
C h 4.
10X PTZ Network Camera SNP-1000A 4.1. How to Use Web Viewer 4.1.1. Login To connect to the login page, click the ‘move to Webpage’ button on Network Manager or enter network camera IP address on the internet web browser and press the enter key. Enter user ID and password and push button, it then moves to the appropriate Web page. Note Default value is ID: admin, PW: 11111111 If you click button, it moves to WebViewer page under the Guest authenticated status.
4.1. How to Use Web Viewer 4.1.2. Web Viewer screen Web Viewer screen is composed of menu area for camera/video configuration and screen area for displaying input video from camera.
10X PTZ Network Camera SNP-1000A Stretch Image When selecting resolution with Half D1 and CIF, stretches channel screen to resolution D1 size. Save Image Saves channel screen to ‘JPEG file’. Quad Converts to 4 split screens (applied only to 4 channel server).
4.1. How to Use Web Viewer Pause Stops video for a while. OSD Displays related information.
10X PTZ Network Camera SNP-1000A Deinterlace On/off function of Deinterlace. Screen where Deinterlace is not applied Screen where Deinterlace is not applied Deinterlace is a function to adjust the video quality Note softly by eliminating the border line which was made by an interlace function. The interlace function draws an even line and an odd line of the Image one after the other.
4.1. How to Use Web Viewer Camera Setup Displays OSD control button of camera.
10X PTZ Network Camera SNP-1000A Note The left/right slide bar can control focus (left slide bar) / zoom (right slide bar) The “+” displayed in the middle can be pressed using the mouse as the base point of the Pan / Tilt and it will Pan /Tilt according to that point. Instruction for Camera OSD control button <↑>, <↓> button Moves selection displaying arrows up and down on camera OSD menu. <←>, <→> button Changes configuration of selected field on camera OSD menu.
4.1. How to Use Web Viewer 4.1.3. Area Zoom guide Area Zoom function supports easy and fast PTZ (Pan/Tilt/Zoom) control for the selected image area on the monitor. Screen image of menu popped up by clicking mouse right button Clicking mouse right button delivers menu of Area Zoom function. Screen image of Area Zoom pointer appeared by Area Zoom selection Clicking Area Zoom menu delivers Area Zoom mode showing yellow colored Area Zoom pointer at the center of monitor.
10X PTZ Network Camera SNP-1000A Screen image of new PTZ position moved by one time click. Clicking mouse left button only controls PTZ position at Area Zoom mode. Screen image of selected image area in the mouse dragged square Clicking mouse left button and dragging a square shapes selected image area on the monitor.
4.1. How to Use Web Viewer Screen image of expanded area Releasing mouse left button stimulates automatic PTZ function mode at the selected image area. At automatic PTZ function mode, Area Zoom pointer is enlarged and PTZ function execution is not available. Screen image of selected Move PTZ on menu At the Move PTZ zone of menu popped up by clicking mouse right button, reset function to 1x zoom, previous PTZ position, next PTZ position is available.
10X PTZ Network Camera SNP-1000A Storage item Go to 1x Zoom Previous PTZ Forward PTZ 48 Function Move to 1x Zoom from present PTZ position Move to previous PTZ position Move to next PTZ position
4.2. Using Administration page 4.2. Using Administration page 4.2.1. Initialization Screen after Connecting When connection is successful, the below screen will be displayed.
10X PTZ Network Camera SNP-1000A 4.2.2.
4.2. Using Administration page 4.2.3. Basic Configures basic information for camera. Video/Audio Setup Item Description Compression Video compression mode (Compression mode of video in the camera) Video Size If the type of installed camera (NTSC/PAL) is selected, then the size of screen on the camera becomes selectable. Video Quality Selects the quality of video screen. In case of low speed internet, lower the video quality to see seamless video.
10X PTZ Network Camera SNP-1000A Item Description Selects the video channel to be used in the camera. Video Channel Selects whether to use the audio input channel in the camera or not. Selects whether to use the audio output in the camera or not. Configures the number of users who can be connected to the camera through the network(1~20 persons) Audio amplifying function onfigures Low for the microphone which has amplifying function and High for the microphone which has no amplifying function.
4.2. Using Administration page 4.2.4. Network Configures network information of the camera. Network Configuration According to the user’s network environment, it is classified into LAN, xDSL, DHCP. Item LAN xDSL DHCP Description In case the camera is connected to the local network or xDSL with a static IP address, configure network information to be assigned to the camera. In case of xDSL with a dynamic IP address, enter password in UserName and Password field.
10X PTZ Network Camera SNP-1000A Port/DDNS Configuration Item Connection Port HTTP Port/ FTP Port Use SWR Description This controls communication with camera. (Default : 4000) This helps to connect to web page or FTP server. (Default : http=80, ftp=21) Select if use of SWR function is available. The way of connection which used ID does not support. Select if DDNS server is available.
4.2. Using Administration page Item Description Administrator Password Change Change password of administrator Guest Setup User clicks ‘Guest’ button to decide whether allowing guest to connect Main Viewer. Current User You can register new user or delete, and set up user’s authority. ※ Set up user authority User’s authorities set up at ‘Current User’ are as follows.
10X PTZ Network Camera SNP-1000A Example 1) In case control function is limited (Do not check Controls box) ※ Pan, tilt, zoom, audio output, alarm output function icon is inactivated Example 2) In case video function is limited (Do not check Video) ※ Compression, Resolution, Framerate, Quality set up icon is inactivated.
4.2. Using Administration page 4.2.6. Pan/Tilt/Zoom Configures PTZ Swing and Preset of the camera.
10X PTZ Network Camera SNP-1000A Item Channel PTZ Display OSD Display PTZ Camera Configura tion Preset Swing Group First Setup Swing Setup Group Setup 58 Second Setup Mode Speed Duration Group No. Preset No. Travel Speed Dwell Time Description Select the channel of camera. Display PTZ menu. Display OSD. Set or delete(delete, delete all) the Preset. Screen move the position of Preset. Surveille Pan/Tilt Swing at the position of preset, set up the swing menu.
4.2. Using Administration page 4.2.7. Motion Detection This sets up motion detection function of camera. Item Grid Display Select Area MD Enable MD Sensitivity Description Basic grid, used to choose area on the screen, is displayed or hidden. When selecting motion detection area, click
10X PTZ Network Camera SNP-1000A 4.2.8. Alarm/Sensor This sets up necessary information when using alarm function by attaching sensor to camera.
4.2. Using Administration page Alarm/Sensor Setup ◊ Digital In Setup Item Description Sensor Type Types of sensors are ‘Normal open’ and ‘Normal close.’ This selects up type of connected sensor. ◊ Digital Out Setup Item Description Set up Alarm Out responding when event is recognized by connected sensor (Sensor 1) or Motion Detection (MD) Set up time to operate relay. It means the period from the time when sensor detects event to the time when relay is released.
10X PTZ Network Camera SNP-1000A Item Description Recipient E-mail Address 1 Recipient E-mail Address 2 Server Name E-mail ID Password Mail Subject Mail Body Note You can designate up to two e-mail address receiving data when alarm occurs. In case you use outside e-mail server, enter the name of the outside e-mail server. Enter ID to connect the outside e-mail server. Enter PW to connect the outside email server. Enter the subject of mail to be transferred. Enter the body of mail to be transferred.
4.2. Using Administration page 4.2.9. Time Current Time Item Date Time Description Current setup date displayed Current setup time displayed Time Setup Item Set Manually Time Server Description Adjust time manually. Set up address of time server for Server 1 - 5.
10X PTZ Network Camera SNP-1000A 4.2.10. LOG Recent activities made for camera are displayed as log. Item Lines View Clear 64 Description Set up number of lines of the list. Log is viewed with number of lines you set up most recently. Delete logs.
4.2. Using Administration page 4.2.11. Upgrade Upgrade program of 10X PTZ Network Camera SNP-1000A. System Upgrade Configuration. Item Firmware/Web Description Upgrade firmware and Web-page of 10X PTZ Network Camera SNP-1000A. Factory Mode Setup If you click button, server is returned to initial value when shipped from the factory after confirmation procedure by administrator.
10X PTZ Network Camera SNP-1000A 4.2.12. System Reboot System is rebooted after confirmation procedure of administrator. Click button to reboot System.
C h 5.
10X PTZ Network Camera SNP-1000A 5.1. OSD Menu Organization PTZ camera can be set up on the OSD (On Screen Display) menu displayed on the video monitor. ① Camera Setting P1 P2 P3 ①Focus Mode ①Focus ②Zoom Tracking ➌Digital Zoom ➋White Balance AWB Mode ➊Brightness ➋Iris ③Exposure ➌Shutter ➍Sens-Up ➍Back Light ➎AGC ➏SSNR ➐Day & Night ⑧Others 68 High/Middle/Low/Off High/Normal/Off High/Middle/Low/Off Auto B/W Color ➊Sync ➋Image Adj.
5.1.
10X PTZ Network Camera SNP-1000A ④ OSD Setting P1 P2 ①Camera Name ➋Preset Number ③Preset Name ➍Sequence Status ➎Area Name ➏PTZ Position ➐Language P3 ①ON/OFF ②Edit ON/OFF ①ON/OFF ②Edit ON/OFF ON/OFF ON/OFF English, 中文, Francais, Deutsch, Espanol, Italiano P4 ➊Position ➋ON/OFF Defaults ON ON OFF OFF English ⑤ Initialize P1 P2 P3 ①Power On Reset ➋Initial Position ③Factory Default Set ④Camera Default Set ➎Auto Refresh P4 ➊Cancel ➋Execute ➊Position ➋ON/OFF ➊Cancel ➋Execute ➊Cancel ➋Execute OFF, 1~7
5.2. PTZ Camera User Menu Settings 5.2. PTZ Camera User Menu Settings Execution of OSD Menu : After checking if the camera is in manual operation mode, press the OSD Menu key. The following commands are displayed on the monitor screen. Main Menu The selection key moves up and down. Press the execution key switch on the selected menu to change the setup menu. Press the ESC key to exit the OSD Menu. 5.2.1. Camera Setting Select the Camera Setting on the Main Menu screen to control camera settings 5.2.2.
10X PTZ Network Camera SNP-1000A ➊Focus Mode Auto : The camera adjusts the focus automatically while monitoring the screen continuously in the auto mode. In the auto focusing mode, zoom key operation is not recognized as the input of the focus key. Manual : In the manual mode, users can adjust the camera focus manually. One Shot AF : Only when the camera does not move, it turns into the auto mode. It is the same as the manual mode.
5.2. PTZ Camera User Menu Settings - When the objects in the long and short distance are under the same surveillance area - When there is no contrast (white and black) in the object (e.g. sky or wall) - When the thin horizontal line is captured 5.2.3. White Balance The White Balance function corrects the abnormal white colour into the normal white colour under any colour temperature lighting. Select the mode among ATW, AWC and Manual. ATW is selected by default.
10X PTZ Network Camera SNP-1000A AWC: Set up the lighting to the objects and corrects the right colour temperature to that of a white object. Camera works under the setup conditions. For the most appropriate condition under the current illumination, capture the white paper and then change the mode into AWC. Press the Enter key and then AWC Start will be displayed. When the adjustment is completed after pressing the Enter key for AWC Start, go to the upper menu.
5.2. PTZ Camera User Menu Settings 5.2.4. Exposure Camera exposure can be controlled. ➊Brightness The brightness of the screen can be adjusted. ➋Iris Auto mode or manual mode can be selected. Auto: The brightness of the image signal can be adjusted automatically depending on the amount of light. Manual: The brightness of the image can be adjusted. ➌Shutter ---: Electronic shutter mode is enabled. The shutter speed is controlled automatically according to the brightness of the screen. A.
10X PTZ Network Camera SNP-1000A If the Manual or A.FLK mode is selected for the Shutter menu, the Sens-Up function is disabled. ➍Sens-Up Auto: The low light level of the night or dark condition is detected automatically and the bright and clear image can be maintained. - Sens-Up Limit: Maximum accumulated magnification can be selected. Off: Sens-Up function is cancelled. Note As the accumulated magnification increases, the screen goes bright.
5.2. PTZ Camera User Menu Settings 5.2.6. AGC When the brightness of the image taken under dark light is under a certain level, the AGC (Automatic Gain Control) functions to define whether to control the Gain automatically or not. HIGH : Gain increased from 6dB up to 34dB. NORMAL : Gain increased from 6dB up to 18dB. OFF : Gain is fixed at 6dB. 5.2.7. SSNR (Samsung Super Noise Reduction) SSNR function reduces background noise under low light conditions differently in different modes.
10X PTZ Network Camera SNP-1000A HIGH : Noise reduction effect is excellent but afterimage is also strong. When you select the AGC mode as “OFF”, you Note cannot use the SSNR function. 5.2.8. Day & Night The darkness level is detected automatically under low light conditions such as at night or under dark light to keep the screen bright and clear. COLOR : Output images are displayed in colour all the time. Burst signal size can be adjusted.
5.2. PTZ Camera User Menu Settings AUTO : Under day condition, the mode is automatically changed into the COLOR mode to keep an optimum colour. At night, the mode is automatically changed into the B/W mode to distinguish dark images clearly. Note If the AGC is in OFF mode, the Auto mode cannot be used. Only COLOUR or B/W mode can be used. If the sunlight or halogen lamp is used in B/W mode, the focus may be blurred compared with the general illumination. 5.2.9.
10X PTZ Network Camera SNP-1000A 5.3. Sequence Setting Sequence Setting Menu 5.3.1 Preset 12 items such as Pan/Tilt location, Zoom and Focus are selected among camera functions and they can be called for monitoring. Total 128 points can be preset. Setting : Select the Preset number for setup. Adjust Pan/Tilt/Zoom and press the Enter key to save the setting. If you want to change the 12 items such as Focus, Brightness, Iris and Scene Adj., use the Up/Down key to go to and select the item.
5.3. Sequence Setting Preset Menu Setting 1. Select the Preset item on the Sequence Setting Menu 2. Select the Setting item. 3. Select the Preset number. 4. Set up the Zoom and Focus. 5. To change the camera settings, select Edit from the upper menu first. Select the item to change, and then make the necessary adjustments. 6. If you select the Scene Adj. item, such items as Shutter, AGC, SSNR, Sens-Up, White Balance can be set up differently in every Preset item.
10X PTZ Network Camera SNP-1000A Note In the White Balance setting of the individual Preset Scene Adj., the AWC selection is not available. 5.3.2. Swing SEQ Swing surveillance can be executed and set up and the data can be deleted. Pan Swing : Swing surveillance for the Pan direction is executed and set up. Data is deleted. Tilt Swing : Swing surveillance for the Tilt direction is executed and set up. Data is deleted.
5.3. Sequence Setting is the moving speed (01-64step). DWL is the stop time (00120sec). Press the Execution key in the location with selection mark to finish the setting process. - Execute : Swing surveillance is executed. Stop key designates this function. - Clear : Data in the Swing function is deleted. 5.3.3. Group SEQ Group SEQ: Sequence surveillance can be executed and set up and data can be deleted. Up to 6 groups can be registered.
10X PTZ Network Camera SNP-1000A Setting : The registered Group Sequence is selected by clicking the mouse and confirmed with the Execution key. If the selected number is not registered, it cannot be input. Press the Execution key in the location with selection mark to finish the setting process. Execute : Group surveillance is executed. Clear : Group surveillance data are deleted. 5.3.5.
5.3. Sequence Setting Memorize: Manual operations for minimum 120 seconds after executing this function are memorized into the internal memory. Nevertheless, the memorizing time becomes different depending on the PTZ operation. OVER mark will finish this function. Note If the operation range is limited using ①Pan Limit and ②Tilt Limit, only the operations within the limited range are memorized. Note Press the OSD key to stop the internal memory to continue saving. 5.3.6.
10X PTZ Network Camera SNP-1000A Time : Auto Run operation is executed after a certain time designated by the user.(Time can be set up by the unit of 5, 10, 20, 30 sec and 1~5 min.) 5.3.7. Power On Resume When the power supply for the camera is stopped for some reason, such as electricity failure, and resumed, the Sequence Settings before the power off are restored.
5.4. P/T Setting 5.4. P/T Setting 5.4.1. Pan Limit The moving range in the Pan direction can be limited. Position : Moving range can be set up. Set the position from the left using the Execution key. The stop position may change due to the initialization by such operation as power resumption depending on position setting. This does not mean it is out of order. On/Off : When this function is on, the limit is effective. Default setting is Off. 5.4.2.
10X PTZ Network Camera SNP-1000A resumption depending on position setting. This does not mean it is out of order. On/Off : The application of limitation will be determined. Default setting is Off. 5.4.3. Area Setting Areas can be indicated. Areas can be designated up to 4. Area Name : Area name can be set up. Use the Execution key to enter the area name. A maximum of 12 letters (English, Chinese, numbers) can be entered.
5.4. P/T Setting 5.4.4. Area Masking If you want to exclude some areas for surveillance, they can be turned into black. You can mask 4 parts of one screen. Position : Use the Execution key to determine the position for screen operation from the left. On/Off : Operation of screen area masking can be determined. Default setting is OFF.
10X PTZ Network Camera SNP-1000A 5.4.6. Digital Flip When you operate the Tilt up to 100° limit and keep it for a certain time, the image gets reversed automatically and the opposite Tilt area is seen. When you want to monitor the moving object under the camera, execute the Digital Flip function. You can observe the moving object without reversing of the screen. 5.4.7.
5.5. OSD Setting 5.5. OSD Setting 5.5.1. Camera Name Camera name is set up. If you want to edit the item, move the cursor. Then Note select the character. y Edit : A maximum of 12 characters consisting of English (or Chinese, Japanese), numbers and special characters can be input for Camera Name. y On/Off : The operation of this function is preset. Default setting is On.
10X PTZ Network Camera SNP-1000A 5.5.2. Preset Number Preset numbering is set up. (Default setting is ON.) 5.5.3. Preset Name Edit : A maximum of 12 characters consisting of English (or Chinese), numbers and special characters can be input for Preset Name.
5.5. OSD Setting On/Off : The operation of this function is predetermined. Default setting is On. 5.5.4. Sequence Status Display of the Sequence Group is set up. (Default setting is ON.) 5.5.5. Area Name Display of Area Name is set up. When the Area Name is OFF, the Area Name cannot be displayed.
10X PTZ Network Camera SNP-1000A 5.5.6. PTZ Position Pan and Tilt position and Zoom magnification are displayed. PTZ positions are not displayed in the OFF mode. (Only manual operation can display them.) 5.5.7. Language The OSD can be displayed either in English (default setting) , Chinese, French, German, Italy and Spanish.
5.6. Initialization Setting 5.6. Initialization Setting Initialization Menu ①Power On Reset Camera is initialized into the original status of power input. ➋Initial Position If you want to set the default direction of the camera so that the camera faces that direction when the power is turned on, you can set up the desired Pan and Tilt for the camera. ③Factory Default Settings Camera is initialized into the factory default settings. Data including Preset is deleted.
10X PTZ Network Camera SNP-1000A camera settings. Default setting is OFF. OFF, 1-7 Days : This function is disabled in the OFF mode. 1-7 Days enables the Auto Refresh operation in the interval of the selected days. Auto Refresh takes less than 10 seconds. The message “Auto Refresh” disappears after finishing the operation. 5.7. Status The status of PTZ camera setting is displayed. CAM MODEL= 10NC CAM VERSION= 4.6 DOME VERSION= 1.
C h 6.
10X PTZ Network Camera SNP-1000A If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problem Nothing appears on the screen. Solution Please check the power connection. Please check the images connecting the video signal line after Open MS-DOS window to check whether 10X PTZ Network Camera SNP-1000A is connected to network. ※ In case of ping 192.168.1.100, replace it with IP address set up.
Troubleshooting Problem The MOTION DETECTION function is not working. Solution Please check if 'MOTION DETECTION' mode is turned on. Please check if the MD LEVEL is too low. Please check the setting of the MD AREA. When camera cannot be controlled for Pan/ Tilt/ Zoom Inspect the cables(power or network) connected to the device. Colors are not quite right. Please check setting. The screen is flickering. Please check if the camera is facing directly into sunlight or fluorescent light.
10X PTZ Network Camera SNP-1000A Problem Solution Please check audio driver is working in user’s PC. Please use the enclosed Audio Extension Cable to install easily when connecting the audio cable. Video is stopped Please check whether network cable of 10X PTZ Network Camera SNP1000A is correctly connected In case user uses hub or IP router, check whether these network equipments are working properly.
A p p e n d ix A .
10X PTZ Network Camera SNP-1000A Registration process of DDNS is as following: Step1) Complete the registration form in iPOLiS website. The website is ‘www.samsungipolis.com’. Figure A-1.
DDNS Usage Figure A-2. Membership Registration: SIGNUP Figure A-3. Membership Registration: Input your information.
10X PTZ Network Camera SNP-1000A Step2) Register the equipment after login. Figure A-4. Login Figure A-5. The list of registered equipment.
DDNS Usage Figure A-6. Product Registration. (Confirm repetition certainly at domain registration.) Figure A-7. The list of registered equipment.
10X PTZ Network Camera SNP-1000A Step3) Configure DDNS information in the equipment. Click the part of Network Configuration in website of Network Camera. Click “USE DDNS” in order to do “Enable” and input the address of DDNS Server. (Default: www.samsungipolis.com ) Enter the ID and Password that is written when register product is in iPOLiS website. The Configuration of DDNS in SNP-1000A is Completed.
DDNS Usage Step4) Confirm the connection status of relevant product in product list of iPOLiS website. Figure A-8. The List of Product. Be able to confirm the information of connected equipment if click button of ‘Product information’.
10X PTZ Network Camera SNP-1000A Figure A-9. Product information Move to Login website of relevant product if click button of ‘ view’. The buttons which are and of ‘product management’ move to relevant page through input password to item that fertilize or erase information of registered equipment in List of product. Only, ‘ID(Domain)’ of product should establishes again as ‘ID(Domain)’ after deleting because it can’t be fertilized. Figure A-10.
Specifications Specifications Camera Part Items Imaging device TV Total Number of Pixels Valid Pixel Horizontal Scan Frequency Vertical Scan Frequency Synchronization Image Output S/N Ratio Horizontal Resolution Minimum Light for Object Electronic Shutter Sens-Up Day & Night White Balance Flickerless Adjustment Iris Gain Control OSD Display Outline Correction Focal Length Digital Zoom Maximum Aperture Rate Coverage Angle Proximity Distance Horizontal Rotation Angle Horizontal Rotation SNP-1000AN SNP-1000
10X PTZ Network Camera SNP-1000A Items SNP-1000AN Horizontal Rotation Speed Horizontal Minimum Moving Angle Vertical Rotation Angle Vertical Rotation Vertical Rotation Speed Vertical Minimum Moving Angle Preset Position Area Masking SNP-1000AP Manual: 0.5° ~ 70°/s(64 levels) Preset: 0.5° ~ 140°/s(64 levels) 0.02° -5°~ 185° (Digital Flip) Manual/Program Manual: 0.5° ~ 150°/s(64 levels) Preset: 0.5° ~ 100°/s(64 levels) 0.
Specifications Network Part Items Output Resolution Output Video Format Video Compression Stage Compression transmission speed Audio Format Ethernet Protocol Dynamic IP SNP-1000AN 5 stages (Very Low, Low, Middle, High, Very High) NTSC : MAX 30 frame/sec PAL : MAX 25 frame/sec Bi-directional audio, 8KHz ADPCM 10/100Mbps HTTP, TCP/IP, FTP, SMTP, DHCP, DNS, DDNS, NTP, PPPOE Supports XDSL and DHCP DDNS Supports DDNS Area Zoom Supports Area Zoom function Max.
10X PTZ Network Camera SNP-1000A Dimension 112
SAMSUNG TECHWIN SALES NETWORK SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea Tel: +82-31-740-8151~8 Fax: +82-31-740-8145 SAMSUNG OPTO-ELECTRONICS UK, LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS Tel: +44-1932-45-5308 Fax: +44-1932-45-5325 SAMSUNG OPTO-ELECTRONICS AMERICA, LTD. 1480 Charles Willard St. Carson, CA90746 Tel: +1-310-632-1234 Fax: +1-310-632-2195 www.samsungtechwin.com www.samsungipolis.
