/&5803, $".
Network Camera User Manual Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. ● OVERVIEW 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed. CAUTION The BNC output port is used to monitor the installation process of the network camera. If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to the product. Please use the input power with just one camera and other devices must not be connected. English _5 ● OVERVIEW These servicing instructions are for use by qualified service personnel only.
overview Please read the following recommend safety precautions carefully. Do not Place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near. Do not attempt to service this apparatus yourself. Do not place a glass of water on the product. Do not install near any magnetic sources. Do not block any ventilation openings. Do not place heavy items on the product.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
overview CONTENTS OVERVIEW 3 3 10 10 11 12 15 Important Safety Instructions Product Features Recomended PC Specifications What’s Included At a Glance (SNB-1000) At a Glance (SND-1010) INSTALLATION & CONNECTION 17 18 20 Mounting the Lens Installation (SND-1010) Connecting with other Device 22 Connecting the Camera Directly to Local Area Networking Connecting the Camera Directly to a DHCP Based DSL/Cable Modem Connecting the Camera Directly to a PPPoE Modem Connecting the Camera to an IP Router with th
WEB VIEWER SETUP SCREEN 40 APPENDIX 56 Connecting to the Camera Login Installing Silverlight Runtime Using the Live Screen 40 40 43 48 51 Setup Video Setup Network Setup Event Setup System Setup 56 58 60 61 63 65 Camera Specification Network Specification Product Overview Troubleshooting Open Source Announcement GPL/LGPL Software License ● OVERVIEW 34 34 35 36 38 English _9
overview PRODUCT FEATURES y H.264/MPEG-4/MJPEG Multi-Streaming This network camera supports the H.264/MPEG-4/MJPEG codec and can display videos in different resolutions and qualities simultaneously with different Codecs. M However, MPEG4 video can not be played on a web page. Use CMS software if you want to play the video on a web page.
WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package.
overview AT A GLANCE (SNB-1000) Front Side b SNB-10 www.sam 00 sungcc tv.c om Item Description Camera Holder (Mount) Holes Used when you mount the camera onto the bracket by fixing the camera holder (mount) adaptor with the bracket. b Auto Iris Lens (Optional) Installed on the lens adaptor. M Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.
Rear Side ● OVERVIEW b c Item Description SYSTEM System, Power Indicators ON : The camera is turned on and connected to the network properly. OFF : When the system is rebooting, or turned off. POWER ON : While the power is on OFF : If the power is off Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. b Reset Button c Power Port Used to plug the power cable. GND Used for earth-grounding.
overview ALARM IN Used to connect the alarm input signal. GND Used for earth-grounding. ALARM OUT Used to connect the alarm output signal. OUT COM Common port where the alarm output signal is connected.
AT A GLANCE (SND-1010) Appearance c b Item Description Dome Cover Dome cover for the lens and unit protection. b Main unit Main unit includes the lens, switch board, PCB boards and screws. c Power Port Used to plug the power cable. ALARM IN Used to connect the alarm input signal. GND Used for earth-grounding. ALARM OUT Used to connect the alarm output signal. OUT COM Common port where the alarm output signal is connected.
overview Components b c Item Description Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. Reset Button b Tilt Screw Used to adjust or fix the tilt of the lens. c Lock Release To separate the bracket from the main unit for the installation or to separate the camera from an installed camera, push this release and turn the main unit in the marked direction of .
installation & connection MOUNTING THE LENS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. ● INSTALLATION & CONNECTION M Mounting the CS lens Turn the optional CS lens clockwise to insert it. SNB-10 www.sam 00 sungcc tv.c om CS Lens Mounting the C lens Turn the C mount adaptor clockwise to insert it and do the same with the C lens. SNB-10 www.sam 00 sungcc tv.
installation & connection INSTALLATION (SND-1010) Precautions before installation Ensure you read out the following instructions before installing the camera: y Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. y Stuck-in or peeled-off cables can cause damage to the product or a fire. y For safety purposes, keep anyone else away from the installation site. And put aside personal belongings from the site, just in case. Installing the camera 1.
Adjusting the monitoring direction for the camera Panning Tilting ❖ Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Then, turning the camera to the left or right is referred to as “Panning”, while tilting the angle is “Tilting”. For panning, the panning limit is 220° for the clockwise, and 100° for the counterclockwise, a total of 255° enabled; further rotation is stopped by the stopper.
installation & connection CONNECTING WITH OTHER DEVICE Power Ethernet Power Ethernet Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. J Be careful not to reverse the polarity when you connect the power cable. You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
Connecting to the I/O port box Connect the Alarm I/O signal to the corresponding port of the rear port box. ● INSTALLATION & CONNECTION Yellow : ALARM IN Black : GND White : ALARM OUT Red : OUT COM y y y y ALARM IN : Used to connect the alarm input signal. GND : Used for earth-grounding. ALARM OUT : Used to connect the alarm output signal. OUT COM : Common port where the alarm output signal is connected.
network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the address bar of the browser. SNB-10 www.samsu00 ngcctv.com Camera INTERNET SNB-10 www.samsu00 ngcctv.
CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM www.samsu00 ngcctv.com Camera DSL/Cable Modem External Remote PC DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect to the camera. 4. Move to [Setup] page. 5.
network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPOE MODEM INTERNET SNB-10 www.samsu00 ngcctv.com Camera PPPoE Modem External Remote PC DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect to the camera. 4. Move to [Setup] page. 5.
CONNECTING THE CAMERA TO AN IP ROUTER WITH THE PPPOE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. www.samsu00 ngcctv.com Camera INTERNET SNB-10 www.samsu00 ngcctv.
network connection and setup BUTTONS USED IN IP INSTALLER Item Description Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Mode Displays either or for the current network connection status. c MAC(Ethernet) Address Ethernet address for the connected camera. Click the column to sort the list by Ethernet address.
m M DDNS URL address enabling access from the external Internet. However, this will be replaced with the of the camera if DDNS registration has failed. IPv4 Scans for cameras with the IPv4 setting. IPv6 Scans for cameras with the IPv6 setting. Search Scans for cameras that are currently connected to the network. However, this button will be grayed out if neither IPv4 nor IPv6 is checked. Auto Set The IP Installer automatically configures the network settings.
network connection and setup 3. In the
pane, provide the necessary information. y MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually. If using an IP router y IP Address : Enter an address falling in the IP range provided by the IP router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 y Subnet Mask : The of the IP router will be the of the camera.6. Click [OK]. Manual network setup will be completed. 7. When the manual setup including IP is completed, the camera will restart. Configure the IP related settings and the Port related settings distinctly with each other. Category Camera #1 Camera #2 IP related settings IP Address Subnet Mask Gateway 192.168.1.100 255.255.255.0 192.168.1.1 192.168.1.101 255.255.255.0 192.168.1.
network connection and setup 3. Enter the password. This is the login password for the “admin” user who accesses the camera. The default password is “4321”. 4. Click [OK]. Auto network setup will be completed. 5. The camera will automatically complete the network setting and restart.
PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed an IP router with a camera connected, you must set the port range forwarding on the IP router so that a remote PC can access the camera in it. ● NETWORK CONNECTION AND SETUP Manual Port Range Forwarding 1. From the Setup menu of the IP router, select . For setting the port range forward for a third-party IP router, refer to the user guide of that IP router. 2.
network connection and setup Setting up Port Range Forward for several network cameras When several network camera connect to one IP router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera. y TCP 943 port is a port for the Silverlight policy server of a camera.
CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M Access to the camera can also be gained by typing the camera's IP address in the address bar of the Internet browser.
web viewer CONNECTING TO THE CAMERA Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100 http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111 http://[2001:230:abcd:ffff:0000 :0000:ffff:1111] If the HTTP port is other than 80 1. Launch the Internet browser. 2. Type the IP address and HTTP port number of the camera in the address bar.
To check the DDNS address Once you register a dynamic IP-based device with the DDNS server, you can easily check the changed IP when you try to access the device. To add the IP address to the server, visit www.samsungipolis.com and register your device, and set the DDNS option to before providing the host name for the DDNS server. LOGIN The default user ID is “admin”, and the default password is “4321”. 1. Enter “admin” in the input box. 2.
web viewer This network camera uses Microsoft Silverlight for displaying the video. INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. 1. Click . 2. When the file download dialog pops up, click . 3. When the download is completed, click . 4.
5. When done, click . ● WEB VIEWER 6. Close and restart the web browser, and try to access the Web Viewer. When Siverlight Runtime is properly installed, you will see the Live screen.
web viewer USING THE LIVE SCREEN Item b c Description Monitoring Move to the monitoring screen. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Alarm Output Activate the Alarm Out port. Digital PTZ You can use the mouse wheel to activate the digital zooming. Full Screen Fit the image in full screen. Capture Saves the snapshot as an image file in the .bmp format. Screen Optimization Adjust the image according to the screen size.
M If the temperature drops below the operational range, video signal may not be produced. In such cases, please wait for the video. To capture the snapshot ● WEB VIEWER 1. Click [ ] on the scene to capture. The Capture dialog should appear. 2. Click [Save] button. The screenshot will be saved in the specified path. M If you are using the IE8 as the default web browser, select “Tools-Internet OptionsSecurity” and uncheck “Use protected mode”. To fit the full screen 1.
setup screen SETUP You can configure the video, network, event and system settings of the camera in the network. 1. In the Live screen, click [Setup ( )]. 2. The Setup screen appears. VIDEO SETUP Video Profile 1. From the Setup menu, select the
What is GOP size? GOP (Group of Pictures) is a set of video frames for MPEG4 and H.264 format compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data. P-Frame contains only the data that has changed from the preceding I-Frame. You can set between 1 and 15 for the MPEG4 and H.264 CODEC.
setup screen Video Setup 1. From the Setup menu, select the
NETWORK SETUP Interface 2. Click . 3. Set the and as necessary. y IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet Mask, Gateway, DNS1, and DNS2. - DHCP : Specify the DNS1 and DNS2. - PPPoE : Specify the DNS1, DNS2, ID and password. If you set it to , you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually. y y y y y y y MAC address : Shows the MAC address. IP address : Displays the current IP address.
setup screen Port 1. From the Setup menu, select the tab. 2. Click . 3. Type in each item in the Port menu as necessary. Neither the port range between 0 and 1023 nor port 3702 is available. y HTTP port : HTTP port used to access the camera via the web browser. The default is 80(TCP). y VNP port : Set a port used to transfer video signals with the Samsung protocols. y RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
5. When done, click [Apply ( )]. IP Filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the tab. 2. Click . 3. Select a . y Deny : If selecting this, access from those IPs that are added to the filtering will be restricted. y Allow : If selecting this, access from only those IPs that are added to the filtering will be accepted. 4. Provide the IP that you want to grant or deny access from. 5.
setup screen 4. Search for the public certificate that you want to install on the camera. To install the certificate on the camera, you need to provide a certificate name (it can be arbitrarily assigned by the user), certificate file issued from the certification authority and a key file. The item will be active only if there exists a public certificate installed. 5. When done, click [Apply ( )]. Installing the certificate 1. Enter the certificate name.
3. Click [PRODUCT REGISTRATION]. 4. Enter the product domain. You must perform the duplicate check for the domain that you entered. ● SETUP SCREEN 5. Select a and specify the . 6. Specify the product location with a description if necessary. 7. Click [REGISTRATION]. The product will be added to the product list that you can check. To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set to . 2.
setup screen EVENT SETUP FTP/E-mail You can configure the FTP/E-mail server settings so that you can transfer the images stored in the camera to your PC if an event occurs. 1. From the Setup menu, select the tab. 2. Click . 3. Select or and enter / select a desired value. y FTP configuration - Server address : Enter the IP address of the FTP server that you transfer the alarm images to.
4. When done, click [Apply ( )]. Alarm Input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the )> tab. . 3. Specify an input device. y Type - Normal Open : It is normally open, but if it is closed, an alarm will be triggered. - Normal Close : It is normally closed, but if it is open, an alarm will be triggered. 4. Specify the . y Always : Always check if an alarm occurs.
setup screen Video analysis 1. From the Setup menu, select the tab. 2. Click
4. Specify the activation conditions. y FTP Sending : Specify the use of the FTP transfer if an event occurs. y Record : Specify the use of recording if an event occurs. 5. When done, click [Apply ( )]. ● SETUP SCREEN SYSTEM SETUP Product Information 1. From the Setup menu, select the tab. 2. Click . 3. Check the camera information, or provide details according to your network environment. y Location : Specify the location where the camera is installed.
setup screen y Timezone : Specify the local time zone based on the GMT. y Use Daylight Saving Time : If checked, the time will be set one hour before the local time zone for the specified time period. This option will be displayed only in areas where DST is applied. y System time setup : Specify the time and date that will be applied to your system. - Manual : Specify the time manually. - Synchronize with NTP server : Sync with the time of the specified server address.
Upgrade/Reboot 1. From the Setup menu, select the tab. 3. Select a desired item and set it appropriately. y Upgrade : Performs upgrading the system. y Factory default : Resets the system to the factory default. - Except network parameter : Reset the other settings except for the interface/port/DDNS/IP filtering settings. - All : Resets all settings including the camera settings.
setup screen To save the current settings and restore the backup settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”. 3. To restore the backup settings, click [Restore]. 4. Select a backup file and click [Open]. Log You can check the system log or event log. 1. From the Setup menu, select the tab. 2. Click . 3. Select a log type.
5. If one page can not display all the logs available, use the bottom buttons to move to the previous, next, or the last item. If you want to view the details of a log, click [Info ( )] in the right column of the log; the log information will be shown in the bottom pane. Each page displays 15 logs with the latest one displayed at the top. The event/system log list can contain up to 1000 logs; after that, the existing logs will be deleted from the oldest one each time a new log is created.
appendix CAMERA SPECIFICATION Items Camera Type Image Sub-items SNB-1000 Color/BW Color Device Progressive Scan CMOS Size 1/4 inch Scan Progressive Scan Total 656 X 488 Effective 640 X 480 Sens Off 1.4Lux (F1.2, 50 IRE) SND-1010 Pixels Min. Scene Illumination Color Gain Control 2X, 4X, 8X, 16X, 32X Sens Up OFF, AUTO(2X ~ 8X) Brightness level adj. Sharpness level adj. Contrast level adj.
Items Environmental Conditions Sub-items SNB-1000 SND-1010 0˚C ~ +50˚C 0˚C ~ +50˚C Humidity 20% ~ 80% 20% ~ 80% Power Requirement DC12V, PoE DC12V, PoE Power Consumption MAX. 2.5W MAX. 2.5W Dimensions Net (WxHxD) Package 72 x 60 x 138.
appendix Items Sub-items OS Network Board Description Embedded Linux Flash memory 128M byte RAM 128M byte Ethernet RJ-45 (10/100BASE-T) PoE Yes (IEEE802.3af Class 2) Hardware Input 1 ea Output 1 ea (Relay) Compression H.264 / MPEG4 / MJPEG Multiple Codec Alarm VGA 640 x 480 QVGA 320 x 240 Resolution Video Max Frame Rate 30(25)ips at all resolution H.264 / MPEG4 Quality Compression : 5 ~ 100 (20 steps) Target Bitrate (CBR mode only) : 1 ~ 10 level MJPEG Quality 1 ~ 20 level H.
Items Sub-items Maximum User Access Event Management Administrator User Access Guest Level Additional User Full Control Privilege Alarm Input Motion Detection Event Notification Alarm Out Activation Schedule JPEG Image transfer : FTP, SMTP Supported OS Windows XP, VISTA, 7, Mac OS Supported Browser Internet Explorer 6.
appendix PRODUCT OVERVIEW ❖ SNB-1000 ]W ^Y SNB-100 msun0gc www.sa ctv.
TROUBLESHOOTING PROBLEM SOLUTION y Check to make sure that all network cables have been connected properly. I can’t access the camera from a web browser. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any problem. y If connected using a DDNS URL, verify that the MAC address has been properly entered. y If the camera is connected to a router, verify that port forwarding is properly configured.
appendix PROBLEM SOLUTION No JPEG file is transferred via e-mail on occurrence of intelligent video analysis event of camera even when the is set to . y Verify the settings in the following sequence: Can be configured even when the is set to ? y Yes, it can be. You can set rules for events despite of the intelligent video analysis setting.
OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD license as follows. Component Name License License URL lighttpd 1.4.25 librtp 1.20 BSD 2.0 BSD 1.0 http://www.opensource.org/licenses/bsd-license.html lighttpd is a secure, fast, compliant, and very flexible web-server that has been optimized for high-performance environments. It has a very low memory footprint compared to other webservers and takes care of cpu-load.
Copyright (c) 1998-2001 University College London All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met : 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
GPL/LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow.
based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
WARRANTY ; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program ; if not, write to the Free Software Foundation, Inc.,51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. Also add information on how to contact you by electronic and paper mail.
or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License.
3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.
or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement).
work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/ or new versions of the GNU General Public License from time to time.
USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it.
Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing nonfree programs.
is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1.
it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4.
1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine readable “ work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.
it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10.
later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission.
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail.
Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@ cryptsoft. com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft. com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com www.samsungipolis.com SAMSUNG TECHWIN EUROPE LTD.
