Notebook User's Manual

SamsungSN6000SeriesUser’sManual CreatingaSavetoDiskPartition67
CreatingaSavetoDiskPartition
Theharddriveshippedinyourcomputerhasasavetodiskpartitionin
whichdatafromsystemandvideomemoryisstoredduringsavetodisk
mode.Thepartitionisthemaximumsizeneededforyourcomputerand
supportssystemmemoryof160MB.
Ifyouneedtorepartitionyourharddisk,youcancreateasavetodisk
partitionusingthePhoenixPHDISKutility,providedwithyour
computer.
Ifyoudonotintendtousesavetodiskmode,
youdonotneedtocreateasavetodisk
partition.
Tocreatethesavetodiskpartition:
Tocreateasavetodiskpartition,youneeda
DOSbootablediskthatcontainsPHDISK,
FDISKandtheFormatcommand.
1. CreateaPhoenixPHDISKutilitydiskfromtheSamsung
RestoreCD-ROM.See“UsingtheSamsungRestoreCD-
ROM”onpage88formoreinformation
2. Shutdownyourcomputer
3. Connectthefloppydrivetothecomputer.(See“Connecting
ExternalModules”onpage29andsee“UsingtheFloppy
Drive”onpage32forinstructions.).Switchonyourcomputer.
4. EnterSystemSetupandundertheBootmenu,setDiskette
Driveasthefirstbootdevice.(see“UsingSystemSetup”for
informationonsettingoptions.)
5. Insertthebootablediskintothefloppydriveandstartyour
computer.
6. Afteryoursystemboots,removethestartupdiskfromthe
floppydriveandinsertthePHDISKdisk.
7. AttheA:prompt,type:
phdisk/c167936/p