User Guide

OSD menu
IMAGE ADJUST (VGA ONLY)
Press OK KEY to enter the sub-menu
AUTO ADJUST – Press OK KEY to auto
adjust Image Settings
H. POSITION – Adjust the horizontal position
value manually
V. POSITION – Adjust the vertical position
value manually
PHASE – Adjust the phase value manually
CLOCK – Adjust the clock value manually
EXIT – Press OK KEY to return to the
main menu
1. Press / KEY to select an icon
3. Press / KEY to selection and adjust the
value
4. Press EXITY KEY to return
INFORMATION
Press OK KEY to enter the sub-menu
7
GENERAL & FUNCTIONAL SPECIFICATIONS
functional specifications
Power Supply
PVM Monitor Power Requirements:
Voltage: DC 24V
Current: 1.8A max
Use only a PSU rated at 24Vdc with a minimum current rating of 1.8A
D-SUB Input
Analog RGB: 0.707Vrms
Support VESA Standard Timing
HDMI Input - HDMI Compatible Interface
480i / 480p / 576i / 576p
720p / 1080i / 1080p
Audio Input
Signal Level: 1.0Vrms
Temperature:
Operating: 0
o
C to +40
o
C
Storage: -20
o
C to +60
o
C
Humidity:
Operating: 10% to 85% (non-condensing)
Storage: 10% to 95% (non-condensing)
Environmental
This series of displays support EDID (HDMI & VGA input)
EDID
14