User Guide

controls & indicators OSD menu
CONNECTORS
13
OSD MENU
COLOR ADJUST
Press OK KEY to enter the sub-menu
COLOR TEMP – Select the color temperature USER/
6500K / 7500K / 9300K
RED – Adjust the RED value under USER setting
GREEN – Adjust the GREEN value under USER setting
BLUE – Adjust the BLUE value under USER setting
COLOR RANGE – Select the color range 16~235/0~255
EXIT – Press MENU button to return to the main menu
1. Press / KEY to select an icon
2. Press / KEY to selection and adjust the
value
3. Press EXIT KEY to return
SCAN SETTING
Press OK KEY to enter the sub-menu
ASPECT RATIO – Select aspect ratio Normal/16:9/4:3
UNDERSCAN – Select underscan ON/OFF/USER
H.START – Adjust horizontal start value under USER setting
H.SIZE – Adjust horizontal size value under USER setting
V.START – Adjust vertical start value under USER setting
V.SIZE – Adjust vertical size value under USER setting
UPSIDE DOWN – Select the image upside down ON/OFF
EXIT – Press OK KEY to return to the main menu
1. Press / KEY to select an icon
2. Press / KEY to selection and adjust the value
3. Press EXIT KEY button to return
A. DC IN: 2.5.mm x 5.5mm
DC power connector (DC 24V Input)
B. RJ45: Ethernet (from Hanwa camera)
C. ALARM IN: Alarm input from Hanwha Camera
D. AUDIO IN: Firmware update
E. USB: FW Update
F. HDMI: HDMI input
G. D-SUB 15pin: VGA input
F. HDMI/PIP: PIP HDMI input.(PIP Model only)
(A)
DC In
(B)
RJ45
(C)
ALARM IN
(D)
AUDIO IN
(E)
USB
(F)
HDMI
(G)
D-SUB
(H)
HDMI/PIP
8