Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 www.hanwhasecurity.
Public View Monitor User Guide Copyright ©2018 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
contents mechanical CABINET Scope Safety Precautions Before You Begin 4 4 5 Material: Metal. Finish: Black DIMENSIONS Unit: mm(inch) 30.12” FUNCTIONAL SPECIFICATIONS 2.1 CONTROLS AND INDICATORS 3.1 3.2 3.3 3.3 3.4 3.5 Functional Specifications 27.56” 7 7 8 MECHANICAL 4 1.1 1.2 1.3 2.31” 18.58” 1.26” 7.87” 15.53” Connectors Control Buttons (on the back) Bottom Panel View (PIP model only) LED Indication Remote Control Accessories 8 9 10 10 11 11 20.26” 3.94” 3.
regulatory agency SAFETY APPROVALS This series design shall meet the standards of the following domestic and foreign agencies: UL : UL 60950-1 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 Hot Key Main Menu Main Adjust Color Adjust Scan Setting Image Adjust (VGA Only) Information Language Setup Menu Source Trigger Factory Reset Audio Control Banner Function 12 12 12 13 13 14 14 15 15 16 16 16 17 REGULATORY AGENCY & RELIABILITY 5.1 5.
general OSD menu SCOPE BANNER FUNCTION This document is used to define the performance of the LCD Public View Monitor (PVM) series. The system supports HDMI and PC inputs, as well as from the built-in camera. The On Screen Display (OSD) menu makes the system easy to operate. SAFETY PRECAUTIONS 1. Do not modify the three-prong grounding type monitor power plug in any way. 2. Operate this unit only from the type of power source indicated on the label. 3.
OSD menu SOURCE TRIGGER BEFORE YOU BEGIN Press OK KEY to enter the sub-menu Read these instructions before installing or operating this product. Note: This installation should be made by a qualified service person and should conform to local codes. TRIGGER – Select trigger OFF/MOTION EVENT SOURCE – Select Motion event source HDMI/VGA EXIT – Press OK KEY to return to the main menu FW.
general OSD menu WARNINGS AND CAUTIONS: To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other openings on the equipment. LANGUAGE WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Press OK KEY to enter the sub-menu OSD MENU 1. Press / button to select an icon 2. Press OK KEY to confirm the selection and return.
OSD menu functional specifications IMAGE ADJUST (VGA ONLY) Power Supply PVM Monitor Power Requirements: Press OK KEY to enter the sub-menu AUTO ADJUST – Press OK KEY to auto adjust Image Settings H. POSITION – Adjust the horizontal position value manually V. POSITION – Adjust the vertical position value manually PHASE – Adjust the phase value manually CLOCK – Adjust the clock value manually EXIT – Press OK KEY to return to the main menu INFORMATION Voltage: DC 24V Current: 1.
controls & indicators OSD menu CONNECTORS COLOR ADJUST Press OK KEY to enter the sub-menu DC In (A) RJ45 (B) ALARM IN (C) AUDIO IN (D) USB (E) HDMI (F) D-SUB (G) OSD MENU 1. Press / KEY to select an icon 2. Press / KEY to selection and adjust the value 3.
OSD menu controls & indicators HOT KEY CONTROL BUTTON (ON THE BACK) KEY to KEY LOCK : Press remote control KEY LOCK to enable this function. KEY UN-LOCK : Press remote control KEY LOCK again to disable this function. A MAIN MENU B C Press MENU KEY to enter the sub-menu D Main Adjust Color Adjust Scan Setting Image Adjust Information Language Setup Menu Factory Reset Audio Control Exit Press / KEY to select an icon, then press OK KEY to confirm the selection.
controls & indicators BOTTOM PANEL VIEW (PIP MODEL ONLY) REMOTE CONTROL POWER KEY: Monitor Power On/Off. MUTE KEY: Mute the Audio. SOURCE KEY: Select input signal. CONTROLS & INDICATORS KEY: OSD scrolling the cursor to desired function. OK KEY: Confirmation key during the OSD operation EXIT KEY: Exit the OSD menu MENU KEY: Monitor OSD control CAMERA KEY: Select camera mode KEY LOCK: Monitor KEY LOCK VGA: Select VGA input HDMI: Select HDMI input 1. POWER LED : This red LED illuminates when power on 2.
