Security Camera User Manual

ManualsBrandsSamsung ManualsSecurity CameraSMART DOME SCC-C6407

Part : AB68-00600A(00)

Printed in China

SCC-C6407

SmartDome Camera

Owner’s Instructions

Manuel d’instruction

Manual del usuario

00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1

Summary of content (31 pages)

PAGE 1
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 1 SmartDome Camera SCC-C6407 Owner’s Instructions Manuel d’instruction Manual del usuario E F Es J Part : AB68-00600A(00) Printed in China
PAGE 2
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3 Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
PAGE 3
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 5 6. Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.) 7. Do not install the unit in humid, dusty, or sooty positions. (Doing so may cause fire or electrical shock.) 8. If any unusual smells or smoke come from the unit, stop using the product.
PAGE 4
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 1-1 Before Usage This is a basic instruction manual for the SCC-C6407 user. It contains all the instructions needed to use the SCC-C6407 from a simple introduction of the control positions and functions of the SCC-C6407 to installation methods in the set up menu. We recommend all users of the SCC-C6407 from the advanced user who has used similar cameras before to the general user to read the instruction manual before using.
PAGE 5
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 1-3 Table of contents Before Usage...............................................................................................1-1 Chapter 1 SCC-C6407 Overview .................................................................1-5 SCC-C6407 Introduction................................................................1-6 Locations of Control .......................................................................1-7 FRONT..................................................
PAGE 6
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 1-5 Chapter 1 SCC-C6407 Overview In this chapter we will briefly introduce the SCC-C6407 and show main functions, locations of control and Switch Setting. SCC-C6407 Introduction SCC-C6407 is a zoom lens built in smart dome camera which provides you with the best monitoring function in connection with CCTV at banks or companies. E The SCC-C6407 is a high quality surveillance camera using x32 zoom lens and digital zoom IC, it can catch clear images up to 320 times.
PAGE 7
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 1-7 Locations of Control FRONT BACK E 1-7 1-8
PAGE 8
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 1-9 ADAPTER CONNECTION INITIAL SETTING SCC-C6407 Adapter BOARD CAMERA ADDRESS SETUP Use SW701, SW702, or 703 for Camera Address setup. You may allocate up to 255 addresses by using SW701 to set the 3rd digit, SW702 the 2nd digit, and SW703 the 1st digit. EX) In case of Camera Address 1, see the following figure for setup. E SW701 SW703 SW702 Setting communication Protocol Use number 1~4 PIN of SW704 to set communication Protocol.
PAGE 9
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 1-11 Setting RS-422A/RS-485 termination Chapter 2 SCC-C6407 Installation As it is shown in the structure map, when Controller and RS-422A/RS485 is connected it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest.
PAGE 10
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 2-2 Preparing the Cables Before Installing Checking Package Contents Please check that all components listed below are included in the package: To install and use the SCC-C6407, the following cables should be prepared. Power Adapter Cable The cable that plugs into the SCC-C6407 power input receptacle has the rated voltage of AC24V, 1.5A. Check the rated voltage before using the cable.
PAGE 11
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 2-4 Installing SCC-C6407 Cable Connection 1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT) Installation Precautions 1) Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C6407 SmartDome Camera and other accessories. 2) Install in an area where the space above the ceiling board is over 18 cm (7 in.) high.
PAGE 12
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 2-6 3) INDOOR HOUSING (SHG-120) This housing is used for installing the SmartDome Camera to an indoor wall or a ceiling. 5) CEILING MOUNT ADAPTOR (SADT-100CM) This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera to a concrete ceiling. E 4) OUTDOOR HOUSING (SHG-220) This housing is used for installing the SmartDome Camera to an outdoor wall or a ceiling.
PAGE 13
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 2-8 Installing the Camera 5. [Figure 5] Match the BRKT-ANCHOR and CAMERA ADAPTER and use 4screws (PH M4 x 8) to assemble them. 1. [Figure 1] Install the structure on the ceiling. (Refer to Installation reference for the Length of the structure) [Figure 5] 6. Pull the safety wire from the case body, and assembly it to the camera holder. [Figure 6] * Built in by the builder of the structure E [Figure 1] Length of ceiling Hole 2.
PAGE 14
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-1 Structure of the Setup Menu CAMERA SET CAMERA ID V-SYNC COLOR/BW MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT ON.../OFF INT/LINE... COLOR.../BW.../AUTO... ON.../OFF 1/2/3/4 OFF/X2~X10 OFF/ON OFF/ON QUIT/SAVE/PRESET IRIS SHUTTER AGC/MOTION EXIT ALC.../WDR.../MANU... OFF/1/100(1/120)~10K/AUTOX2...~X160... OFF/LOW/HIGH (AGC) S.SLOW/SLOW/NORM/FAST/F.FAST(MOTION) ATW1/ATW2/AWC/MANU... ON/OFF ONEAF/MF ...
PAGE 15
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` ALARM SET 3-3 ALARM PRIORITY SET ALARM1~8 EXIT ALARM IN SET ALARM1~8 EXIT NO/NC/OFF QUIT/SAVE ALARM OUT SET ALARM1~8 MOTION EXIT 1~3 1~3 QUIT/SAVE AUTO SET ALARM1~8 MOTION EXIT AUX OUT CONTROL 1~8 QUIT/SAVE OFF/PATTERN1~3/HALF1~2/FULL/SCAN1~4 OFF/PATTERN1~3/HALF1~2/FULL/SCAN1~4 QUIT/SAVE OUT1 OUT2 OUT3 EXIT ON/OFF ON/OFF ON/OFF QUIT/SAVE RET OTHER SET PROPOTIONAL P/T TURBO P/T AUTO CAL D-FLIP CAM RESET LANGUAGE PASSWORD EXIT ON/OFF ON/OFF OFF/6HOUR/12
PAGE 16
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-5 COLOR/BW (CAMERA ID) (CAMERA SET) CAMERA ID V-SYNC COLOR/BW MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T ON... INT COLOR... OFF 3 OFF OFF OFF EXIT QUIT In the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter. In a poor illumination environment, the IR filter is turned off in the BW mode the its sensitivity increases as high as a black and white camera.
PAGE 17
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-7 ❈ In AUTO mode, AGC will be displayed as “---“. You can’t adjust the settings manually. (CAMERA SET) (AUTO) CAMERA ID V-SYNC COLOR/BW MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T OFF INT AUTO... OFF 3 OFF OFF OFF EXIT QUIT ➜ Press [Enter] BURST LEVEL DURATION RET ON LOW S --|---- L Caution : If you use an infrared light source while in AUTO mode, AUTO switching malfunction and camera AF malfunction may occur.
PAGE 18
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-9 DIGITAL ZOOM EXIT You may set up the digital zoom magnification ratio in the DIGITAL ZOOM menu. The magnification ratio ranges from OFF to 10. If you set Digital Zoom of SCC-C6407 to max. 10 times, the mode will become the 32 time optical zoom and you will be able to enlarge a subject by max. 320 times. Use Left or Right to select a magnification ratio in the DIGITAL ZOOM menu.
PAGE 19
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-11 For items in the BLC menu, the user can set the area and location of the BLC area by pressing [ENTER] key after put the cursor on USER… using the [Left, Right] key. For AREA items, you can use the [Up, Down, Left, Right] key to designate the AREA, and then press the [ENTER] key. You can set the location for areas using the [Up, Down, Left, Right] key in the LOCATION. (ALC) AREA ➜ MANU... OFF OFF ATW1 OFF ONEAF ...
PAGE 20
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-13 (VIDEO SET) WHITE BAL (FLICKERLESS) IRIS SHUTTER MOTION WHITE BAL DIS FOCUS MODE SPECIAL ALC... AUTOX2... NORM ATW1 --ONEAF ... EXIT QUIT Lights are generally denoted as color temperatures and expressed in Kelvin (K) units. The general light color temperatures are shown below.
PAGE 21
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-15 You can select one of four modes for white balance adjustment as follows: - ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically. The following are the approximate supported color temperature ranges in these modes. ATW1 : 2500K ~ 9300K(✻1) ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(✻2) ✻ 1.
PAGE 22
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-17 EXIT POSITION SET It's the same as the EXIT function of the CAMERA SET menu. From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu. 3. PRESET PRESET ID This is the menu that user sets the PAN/TILT location, Zoom/Focus, and screen condition, so the camera can monitor the presetting area on demand.
PAGE 23
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-19 BLANK ALL ABOVE 4. ZONE SET The ZONE SET menu includes the setup of PRIVACY ZONE, ZONE DIRECTION, and ZONE AREA. The available angle for setup ranges from OFF/0/-10 to -90 and the area above a set angle will be regarded as the ZONE area. BLANK ALL BELOW * * MAIN MENU * * CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... (ZONE SET) ➜ Press [Enter] PRIVACY ZONE ZONE DIR SET ZONE AREA SET ... ON...
PAGE 24
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-21 SET ZONE AREA SET ZOOM Press [ENTER] at the “SET ZONE AREA...” location to enter the PRIVACY ZONE setup screen. Control PAN/TILT/ZOOM to select 4 apexes of the PRIVACY ZONE area and the rectangular PRIVACY ZONE area will be completed. Press [ENTER] at the “SET ZOOM...” location to enter the ZOOM setup screen. After ZOOM setup, the PRIVACY ZONE function will be in action only at the higher magnification than the Zoom magnification as set.
PAGE 25
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-23 ZONE DIR SET LOCATION Press the [Enter] key in the “ZONE DIR SET ON…” mode to enter the NORTH SET screen. MAP. Move PAN to set the NORTH location and press [ENTER]. Based on the North location,the direction of N(North), NE(North-East), E(East), SE(South-East), S(South), SW(South-West), W(West), NW(North-West) is displayed whenever you move PAN. The “LOCATION...” menu designates the left/right LIMIT positions of ZONE AREA.
PAGE 26
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-25 5. AUTO SET DIRECTION The AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it is able to set up the AUTO PLAY motion. This sets up the movement direction of the START to END location (PAN location standard) "RIGHT " : "LEFT " : AUTO PAN After selecting the locations of two points (PAN/TILT) of START and END, it loops continuously in the set up SPEED. The number of AUTO PAN is up to 4. E * * MAIN MENU * * CAMERA SET... VIDEO SET... PRESET... ZONE SET...
PAGE 27
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` * * MAIN MENU * * CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO... 3-27 AUTO PLAY (AUTO SET) AUTO PAN PATTERN SCAN AUTO PLAY ➜ Press [Enter] 1... 1... 1... ... ➜ Press [Enter] RET ➜ PATTERN SET 1 SET START POSITION AND ENTER (AUTO SET) AUTO PAN PATTERN SCAN AUTO PLAY PATTERN SET 1 After PATTER START position setup, press [ENTER]. SCAN SCAN sets the direction of PRESET movement during “SCAN” operation.
PAGE 28
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-29 AUTO SET 6. ALARM SET It consists of 8 ALARM INPUTs and 3 ALARM OUTs.It can sense an ALARM input from exterior SENSORs and it performs with PRESET or PATTERN function and outputs the ALARM OUT signals. Alarm operation time depends on the Preset Dwell time corresponding to the alarm and whether AUTO is involved. * * MAIN MENU * * CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... SYSTEM INFO...
PAGE 29
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-31 TURBO P/T This function doubles up the speed of PAN/TILT movement by manual operation of PAN/TILT. The speed may go up to 180°/sec(PAN). AUTO CAL This function turns on or off Auto Calibration. SCC-C6407 has the Auto Calibration function to improve the precision of LENS and PAN/TILT motor. You may set to OFF/6H/12H/18H/24H. Without user’s key input for the time designated by the user, A.C. will appear on the screen while initializing LENS and PAN/TILT.
PAGE 30
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-33 9. SHORT KEYS SSC-1000 or SSC-2000 Controller supports the following short keys. Function * SCC-C6407 has two FANs inside for preventing overheating. If FAN doesn't work properly, messages below will be displayed. In those case, replace the FAN.
PAGE 31
00600A-SCC-C6407-ENG 8/17/063:27PM ˘` 3-35 Product specifications Cautions SCC-C6407 NO Items 1 Product Type 2 Power Input 3 Power Consumption 4 Broadcasting Type 5 Image Device 6 Effective Pixels - 768(H) x 494(V) 7 Scanning Mode - 525 Lines, 2:1 Interlace 8 Scanning line Frequency Remark - 22W - NTSC STANDARD COLOR SYSTEM • This manual will be modified according to product enhancements.