User Manual

20
can be well below the maximum reported value.
This is because the device is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In general,
the closer you are to a wireless base station
antenna, the lower the power output of the device.
For more information about SAR, visit:
• https://www.fcc.gov./general/
radio-frequency-safety-0
• www.fcc.gov/encyclopedia/specific-
absorption-rate-sar-cellular-telephones
Before a new model device is available for sale
to the public, it must be tested and certied to
the FCC that it does not exceed the SAR limit
established by the FCC. Tests for each model are
performed in positions and locations (for example,
at the ear, worn on the body, or worn on the wrist)
as required by the FCC. Use of other accessories
may not ensure compliance with FCC RF exposure
guidelines.
For typical operation, this device has been tested
and meets FCC SAR guidelines. The FCC has
granted an Equipment Authorization for this
device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines.
SAR values for body-worn operations are
measured when used with an accessory that
contains no metal and that positions the device a
minimum of 1.5 cm from the body.
The FCC safety limit for body-worn SAR is 1.6
watts per kilogram (1.6 W/kg).