High Resolution D/N IR Dome Camera SIR-4250 User’s Manual Thank you for purchasing a SAMSUNG CCD CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. SALES NETWORK • SAMSUNG TECHWIN CO., LTD. 333-1, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do 462-807, Korea TEL : +82-31-730-8931~3 FAX : +82-31-730-8950 • SAMSUNG OPTO-ELECTRONICS UK, LTD.
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
Contents 6 Features 7 Warnings & cautions 21 21 22 ■ Settings can be made using the RS-485 communication • LENS (Adjusting to the brightness level) 25 • SHUTTER (condition and speed control) 26 11 • WHITE BALANCE control 26 11 12 • BACKLIGHT (Backlight Compensation) 28 • AGC (Auto Gain Control) 29 • SSNR (Samsung Super Noise Reduction) 30 Components and Accessories 10 Overview ■ Front ■ Back Operating Your Camera ■ Menu Installation 14 • SENS UP (Low illuminance) 31 ■ Installation
Features Ultra High Sensitivity Indoor Visibility range 16M The built-in high sensitivity COLOR CCD enables a clear image even in 0Lux(B/W, IR-LED ON)or lower illumination. If B/W mode, IR-LED is lighted, 0 Luxes' Outdoor visibility range 16M guarantees is available. Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.
Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment. Use only under temperature conditions between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install under unstable lighting conditions. May lower image quality. Do not drop the camera or subject it to physical shock. May cause a product malfunction. Never keep the camera face to strong light directly. May damage the CCD.
Overview Components and Accessories FRONT 1. High Resolution D/N IR Dome Camera SIR-4250 2. M4 Tapping Screws 4EA 3. USER’S MANUAL 4. DC 12V/4A Adaptor Rotate Base : control rotating angle of camera Safety ring Dome Cover 5. POWER CABLE Pan base Holding Screws (Color:Silver) : Fix panned position. Pan Base : control panning angle of camera Video output terminal 6. Sub Monitoring Cable RS-485 Control terminal : The detailed decription refers to p20.
Overview Function Button • SETUP button : Used for the menu display. Confirm the status of the selected function. • Right , Left button : Used when changing item values, by moving the cursor to the left or right on the menu screen • Down , Up button : Used when changing item values, by moving the cursor to the up or down on the menu screen Pan base Holding Screws (Color:Silver) : Fix panned position. BACK Focus Handle : To provide for accurate focusing of an object within the lens field of view.
Installation Installation Adjust the panning and tilting, rotating while watching the monitor Notes 73˚ 145˚ • The installation should be done by qualified service personnel or sysytem installers. • If the ceiling material is not strong enough to hold the installation screws, the camera may fall off. Reinforce the ceiling as needed. • Take care not to drop the product during installation. Do not allow anyone to stand below the installation area.
Installation Adjusting varifocal lens zoom and focus Notes • When adjusting the rotating angle, loosen rotate base holding screw as following Figure A. And then tighten it again. • When adjusting the tilting angle, just grip the tilt base and adjust tilting angle. • When adjusting the panning angle, loosen pan base holding screws as the following Figure B. And then tighten them again.
Connection Connecting to Monitor Connecting to Power Please connect the video output terminal located on the back of the camera to the monitor. The recommended adaptor specification for SIR-4250N/P is DC 12V/4A. Please check the standard power requirement before connecting to power. Monitor CCTV Camera • The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. • Please turn off the power when connecting.
Operating Your Camera Connection RS-485 communication control Menu Connecting to RS-485 CONTROL TERMINAL SETUP menu CONTROL TERMINAL SPEC WHITE (TRX+) RS-485+ BLACK (TRX-) RS-485Using a RS-485 communication, it will be able to control the OSD menu at the SAMSUNG TECHWIN System Controller or DVR.
Operating Your Camera LEFT BUTTON Settings can be made using the RS-485 communication UP BUTTON Function setting uses 5 buttons within this product or RS-485 communication. RIGHT BUTTON 1. Function setting that use button DOWN BUTTON OSD SETUP BUTTON Notes • Please set RS-485 communication setting of controller and camera equally. SET Right Left Down button button button button Top button 2.
Operating Your Camera 1. Please press the SETUP button. • Settings can now be made. The SETUP menu is displayed on the monitor. SETUP 1.LENS 2.SHUTTER 3.WHITE BAL. 4.BACKLIGHT 5.AGC 6.SSNR 7.SENS-UP 8.SPECIAL 9.EXIT DC --ATW OFF NORMAL LOW OFF LENS (Adjusting to the brightness level) 2. Please select any function you wish to activate by using the UP and DOWN buttons. • The arrow can be moved up or down by using the UP and DOWN buttons.
Operating Your Camera SHUTTER (condition and speed control) Because SIR-4250 uses built-in dc lens, shutter speed is fixed at 1/60 basically. SETUP 1.LENS 2.SHUTTER 3.WHITE BAL. 4.BACKLIGHT 5.AGC 6.SSNR DC --ATW OFF NORMAL LOW - - - - : Shutter speed is fixed at 1/60(1/50) FLK : Please select 'FLK' mode when flickering occurs on the screen, due to an imbalance between illumination and frequency.
Operating Your Camera BACKLIGHT (Backlight Compensation) AGC (Auto Gain Control) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. SETUP 1.LENS 2.SHUTTER 3.WHITE BAL. 4.BACKLIGHT 5.AGC 6.
Operating Your Camera SSNR (Samsung Super Noise reduction) The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. SETUP 1.LENS 2.SHUTTER 3.WHITE BAL. 4.BACKLIGHT 5.AGC 6.SSNR 7.SENS-UP 8.SPECIAL 9.EXIT DC --ATW OFF NORMAL LOW OFF : There is no reduction in noise level.
Operating Your Camera 3) Please press the SETUP button. SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. SPECIAL 10.CAMERA ID OFF 11.DAYNIGHT AUTO 12.MOTION DET OFF 13.PRIVACY OFF 14.COMM ADJ 15.IMAGE ADJ 16.RESET 17.RETURN 4) Up to 15 letters can be used for the ID. Please move the cursor to the letter you wish to choose by using the UP and DOWN button.
Operating Your Camera 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. DAY&NIGHT (ICR TYPE) : Select from COLOR, B/W or AUTO modes. •AUTO: According to the input luminance level, IR Cut Filter is automatically switched to the appropriate mode for daytime or night-time. The COLOR mode is operated for daytime, and it converts to BW mode for night-time The name will appear at the top left hand corner.
Operating Your Camera • Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button. COM ADJ : When wish to control CAMERA by external communication control device, it is function that set up CAMERA's communication states and protocol. • Please press the SETUP button to save the changes and complete the setting. • CAM ID Notes • There is no ‘MD’ output signal. ‘MD’ is on screen display only words. PRIVACY : Mask privacy area you do not wish to appear on the screen.
Operating Your Camera • SHARPNESS : The outline of the video image becomes cleaner and more distinctive as the level of SHARPNESS increases. If the level goes up excessively, however, it may affect the video image and generate noise. RESET : Returns to the level which was set by the manufacturer for shipment. RETURN : Returns to the SETUP menu. EXIT Saves all the setting menus and then exits.
Dimension Specifications SIR-4250N C C D S y n c. 55.9mm 109.5mm R 48 E L E C T R I C A L POWER Sensor Total Pixels Effective Pixels Scanning System Synchronization Frequancy Resolution Video Output S/N (Y signal) Min. LED ON Illumination LED OFF Visibility Range (IR LED ON) Day & Night(ICR) Gain Control White Balance Electronic shutter speed Back Light Compensation SSNR Sens-Up O.S.
DECLARATION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SIR-4250P Beginning Serial NO. S7100001 Year of Manufacture 2007. 10.
