User`s manual

COLOR CCD CAMERA User’s Manual (SID-370)
16
COLOR CCD CAMERA User’s Manual (SID-370)
17
2. Select the desired feature adjusting the Function Setup switch to up or down.
• Move the arrow indicator to the desired feature item.
3. Change the status of the selected feature adjusting the Function Setup switch to
left or Right.
4. When completed, move the arrow indicator to 'EXIT' and press the Function Setup
switch.
MAIN SETUP
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET OFF
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
MAIN SETUP
WHITE BAL ATW
BACKLIGHT OFF
Operating Your Camera
Selectthefunctionby
moving up or down
direction of function
setup switch.
Changethestatusby
moving the setup
switch left or right.
White Balance (White Bal.)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ’White Bal.‘ by moving up or
down direction of Function Setup Switch. so that the arrow indicates ’White Bal.‘ .
2. Select a desired mode moving up or down direction of Function Setup Switch.
•Featuresmarkedwitha have an accessible submenu.
•AccessthesubmenubypressingtheFunctionSetupswitch.
Notes
Use the Function Setup switch downward of the lens.
✽ Function of Function Setup switch
1. When you press the Function Setup switch for longer than 2 seconds, you could enter
menu mode.
2. When you press the Function Setup switch about 1~2 seconds, you could see the massage
as following "...Wait AF..." and 10 second later, the auto focus function would operate.
3. When you press the Function Setup switch for less than 1 second, the one-push auto
focus function would immediately operate.
4. Moving up and down the Function Setup switch , you could move specific menu or
change magnification of the zoom camera.
5. Moving right and left the Function Setup switch, you could select menu or position of the
focus.
1. Press the Function Setup switch.
• Press the Function Setup switch longer than 2 seconds. on the monitor screen.
FunctionSetupswitch
Menu Setup
✽ Select one of the following 5 modes, as appropriate for your purpose.
ATW : Sel ect this when the color temperature is between 1800ºK and 10500ºK
INDOOR : Select this when the color temperature is between 4500 ºK and 8500 ºK .
OUTDOOR : Sel ect this when the color temperature is between 1800ºK and
10500ºK. (sodium light inclusion)