User`s manual

COLOR CCD CAMERA User’s Manual (SID-370)
14
COLOR CCD CAMERA User’s Manual (SID-370)
15
• As shown in the table above, voltage decreases as the wire gets longer. Therefore
use of an excessively long adaptor output line for connection to the camera may
affect the performance of the camera.
*Standard voltage for camera operation : DC 12V ± 10%
*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
•Besuretoconnectpoweronlyafteralltheinstallationiscomplete.
•NotethatDCadaptorisnotsuppliedwithcamera.
•GroundshouldbeconnectedtotheGNDterminal.
Notes
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG)
#24(0.22mm
2
) #22(0.33mm
2
) #20(0.52mm
2
) #18(0.83mm
2
)
Resistance (Ω/m) 0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.028 0.018 0.011 0.006
Connection
Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and
OSD menu at the SAMSUNG TECHWIN System Controller or DVR.
(1) The case which it controls from the PC
Using a RS-485 converter, It connects to RS-485 control cable outside camera
and serial cable
 EX)SERIALPORTOFTHEPC(COM1)—SERIALCABLE--RS-485CONVERTER--RS-485
CONTROLCABLE
(2)The case which it controls from the DVR or System Controller
It connects the RS-485 control cable in the connection terminal of 485 control
boards which are connected with the DVR or System Controller.
CONTROL CABLE SPEC
WHITE (TRX+) RS-485+
BLACK (TRX-) RS-485-
485 CONTROL BOARD CONNECTION TERMINAL RS-485 CONTROL CABLE
(+)CONNECTION TERMINAL WHITE (TRX+)
(-)CONNECTION TERMINAL BLACK (TRX-)
RS-485 communication control
•When you construct external controlsystemsfora camera control,pleaseuseto
theSAMSUNGTECHWINPROTOCOLorPELCO-DPROTOCOL.
•WhenyouconnectingtoRS-485controlcable,pleasepeelofftheouterskininside
theRS-485controlcable.
Notes
Connecting to RS-485 Control Cable
Operating Your Camera
Main Setup Menu
WHITE BAL
• ATW • MANUAL • AWC->SET
• OUTDOOR • INDOOR
BACKLIGHT • OFF • BLC • HLC
MOTION DET • OFF • ON
FOCUS
• MODE • ZOOM TRK • ZOOM SPEED
• D-ZOOM • ZOOM POS INIT • USER PRESET
• LENS INIT • END
EXPOSURE
• BRIGHTNESS • IRIS • SHUTTER
• AGC • SSNR • SENS-UP
• END
SPECIAL
• PRIVACY • DAY/NIGHT • DIS
• COMM ADJ • IMAGE ADJ • DISPLAY
• END
RESET
EXIT
Menu Configuration