User`s manual

COLOR CCD CAMERA User’s Manual (SID-370)
22
COLOR CCD CAMERA User’s Manual (SID-370)
23
Tips on Using the Motion Detection Feature
•Thefeaturemaynotfunctionproperlyunderflickeringlightconditions.
•Thecamerainterpretssuddenchangesinlightingandsubsequentchangein
brightness of an object as motion.
•Withthefeatureenabled,otheralgorithmsmayrequireadditionaltimetooperate
than usual.
Notes
FOCUS
1. Press the Function Setup Switch to access the main setup manu and then position
the indicator over FOCUS moving up or down direction of Function Setup Switch.
2. Press the Function Setup Switch.

MODE : You can select the most suitable zoom mode. Move the arrow indicator to
’MODE‘ moving up or down direction of Function Setup Switch.
MAIN SETUP
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET OFF
FOCUS
EXPOSURE
• AUTO : Select AUTO and press the Function Setup
Switch to confirm. Increase or decrease optical
zoom (ZOOM) or digital zoom (D-ZOOM)
positions moving up or down direction of
Function Setup Switch while verifying the
changes on screen. Enabling D-ZOOM (ON)
means that digital zoom will activate once
optical zoom ends. Focus is automatically
adjusted with moving zoom.
• ONE PUSH : Focus is automatically adjusted just once,
after zoom position is changed. Select
'ONE PUSH' and press the Function Setup
Switch to confirm. Increase or decrease
optical zoom (ZOOM) or digital zoom
(D-ZOOM) positions moving directional
key of Function Setup Switch while
verifying the changes on screen. Press the
Function Setup Switch once desired image quality is obtained.
ZOOM POS SETUP
↑
: TELE
↓
: WIDE
ZOOM/FOCUS POS SETUP
↑
: TELE
↓
: WIDE
←
: NEAR
→
: FAR
FOCUS SETUP
MODE ONE-PUSH
ZOOM TRK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT AUTO
USER PRESET OFF
LENS INIT MANUAL
END
•Thissystemdoesnotguaranteepreventionoffireortheft.Themanufacturershall
not be held responsible for any accident or damage incurred.
•ConnectanexternalalarmdevicetoMDOutonbackofthecamera.
Notes
ZOOM’ position.
• START ZOOM : Moving left or right direction of Function Setup Switch in the ‘START ZOOM’ item
to select the zoom position from 1x to 37x to be returned after the ‘SMART
ZOOM’ action is over.
• TARGET ZOOM : Moving left or right direction of Function Setup Switch in the ‘TARGET
ZOOM’ item to select the zoom position from 1x to 37x to be used during
MOTION DETECTION.
• DWELL TIME : Moving left or right direction of Function Setup Switch in the ‘DWELL TIME’
item to select a time between 5 and 60 seconds for the dwell time before the
zoom is returned to the ‘START ZOOM’ position. (5,7,10,15,20,30,40,60 sec)
TOP, BOTTOM, LEFT,RIGHT : You can adjust the size of the area
Operating Your Camera