User`s manual

COLOR CCD CAMERA User’s Manual (SID-370)
20
COLOR CCD CAMERA User’s Manual (SID-370)
21
•Since thefollowingsymptomsmayoccuraccordingtothe ambient illumination
whenBLCisselected,setittoOFF.
1
Colororscreenchangesunnaturally.
2
Noiseappearsinthebrightpartofthescreen.
•SincetheperformanceoftheBLC function maybeaffectedbythe areaofthe
brightpartofthescreen,optimizetheinstallationangleforthebestBLC
performance.
•IfyouincreaseLIMIT,thescreendisplaymaybedistorted.
•ForhighperformanceofBLCfunction,WerecommendthatyousetIRIStoAUTOin
theEXPOSUREsetup.
•ActivatingBLCmaycausethecameratorepeattheAutoFocusoperation
dependingonlightingconditions.ItisrecommendedthatyouusetheFocusSetup
menuinOne-PushorManualmode.
•SmartZoomandBLCcannotbeusedinconjunctionwitheachother:
•SettingupBLCandthenSmartZoomautomaticallycancelsBLC.
•SettingupSmartZoomandthenBLCautomaticallycancelsSmartZoom.
Notes
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words ‘MOTION DETECTED’ appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object’s movement by sensing
disparity of outline, and level of brightness and color. The camera receives detection
signal from MD output terminal.
• Please press the Function Setup Switch.
- OFF: MOTION DETECTION mode is cancelled.
- ON: Any motion in the selected areas is observed.

AREA SEL : You can select the area you wish to observe from the 8 area.

AREA MODE : Determines whether to use the MD area selected in SENSITIVITY

SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement

SMART ZOOM : Smart zoom is operated in connection with MOTION DETECTION.
When the SMART ZOOM function is ‘ON’ while the MOTION
DETECTION mode is ‘ON’, the zoom goes to the TARGET ZOOM
position once motion is detected. Once the zoom action is finished
and ‘DWELL TIME’ has passed, the zoom returns to the ‘START
Motion Detection
MD SETUP
▶
AREA SEL AREA1
AREA MODE ON
SENSITIVITY LOW
SMART ZOOM ON
END
AREA SETUP
▶
TOP 3
BOTTOM 6
LEFT 3
RIGHT 6
END
|
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
SMART ZOOM SETUP
▶
START ZOOM X1
TARGET ZOOM X5
DWELL TIME 5 SEC
END
HLC SETUP
▶LEVEL LOW
MASK COLOR 5
END
||||||||||||
|
|||||||||||||
• Select ‘HLC’ to adjust the HLC MASK COLOR and
LEVEL.
OFF : Deactivates the BACKLIGHT function.
3. Select a desired mode moving left or right direction
of Function Setup Switch. and press the Function
Setup Switch.
• Select ‘BLC’ to adjust the area to be enhanced and
enhancement level.
BLC SETUP
▶LEVEL LOW
TOP 30
BOTTOM 70
LEFT 30
RIGHT 70
END
|||||
|
||||||||||||||||||||
|||||
|
||||||||||||||||||||
||||||||||||||||||
|
|||||||
||||||||||||||||||
|
|||||||
Operating Your Camera