User`s manual
COLOR CCD CAMERA User’s Manual (SID-370)
18
COLOR CCD CAMERA User’s Manual (SID-370)
19
•WhiteBalancemaynotworkproperlyunderthefollowingconditions.Inthiscase
selecttheAWCmode.
1 When the color temperature of environment surrounding the subject is out of
the control range
2 When the ambient illumination of the subject is dim.
3 If the camera is directed towards a fluorescent light or is installed in a place
where illumination changes dramatically, the White Balance operation may
become unstable.
Notes
2. Select a desired mode moving left or right direction of Function Setup Switch. depending
on the camera pupose.
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
The same time, even when the subject is in backlight, unlike conventional cameras,
By adopting a proprietary W-IV DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by moving up or
down direction of Function Setup Switch. so that the arrow indicates ‘BACKLIGHT’.
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC(High Light Compensation) :
If there is a high light installed in dark environment
such as an apartment parking garage or gas
station entrance, removing the high light makes
it possible to view car license plates efficiently.
MAIN SETUP
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET OFF
HLCMASKINGAREA
<HLCON>
<HLCOFF>
WHITE BAL MANUAL SETUP
RED 117
BLUE 93
▶END
|||||||
|
||||||||||||||||||
|||||
|
||||||||||||||||||||
Press SET to Return
AWC →SET :
To f ind the optimal setting for the current luminance environment in this mode,
set the point the camera towards a sheet of white paper and press the
Function Setup Switch. If the environment changes, readjust it.
MANUAL :
Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-tune
the White Balance and then press the Function Setup Switch.
Operating Your Camera