High Resolution 37X Zoom Color Dome Camera SID-370 User’s Manual Thank you for purchasing a SAMSUNG Dome CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
Features Contents • Features…………………………………………………………… 5 • Warnings & Cautions… ………………………………………… 6 • Precautions… …………………………………………………… 7 • Components and Accessories… ……………………………… 8 • Overview…………………………………………………………… 9 • Installation… ……………………………………………………… 10 ■ Installation……………………………………………………………… 10 ■ Adjust the panning and tilting, rotating while watching the monitor… ……… 12 • Connection………………………………………………………… 13 ■ Connecting Monitor… ………………………………………………… 13 ■ Connecting to Power… ………………………………………………… 13 ■ RS-
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment.
Precautions Overview 3 2 Do not expose the camera to radioactivity. 5 1 ❼ If it is exposed to radioactivity, For heated CCD, it will be out of order. ❻ 4 ❿ Notes ❽ ❾ ⓫ • If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur. • Please check that the power satisfies the normal specification before connecting the camera.
Installation Installation When installing on a adapter plate 1) Separate the dome cover by clockwise rotation. adapter plate Main Body (Camera) Latch Unlocking direction Locking Direction Unlocking direction Locking Direction Dome Cover [Figure-1] M4 tapping screw (provided) CAMERA * To install the dome cover on the camera body, turn the latches in locking direction as shown in the figure 1.
Installation Connection Adjust the panning and tilting, rotating while watching the monitor Wide Adjust limit position Connecting Monitor Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. 0˚ 83˚ 90˚ Fixed Bracket Fixation Screw Monitor CCTV Camera 180˚ Tilt Limit Line 1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism. • Adjusting the panning angle by moving the Rotate Cover. Rotate Covers moves by 180 to each side direction and 380 on the whole.
Connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) Resistance (Ω/m) #24(0.22mm2) 0.078 #22(0.33mm2) 0.050 #20(0.52mm2) 0.030 #18(0.83mm2) 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 • As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
Operating Your Camera Menu Setup ✽ Function of Function Setup switch 1. When you press the Function Setup switch for longer than 2 seconds, you could enter menu mode. 2. W hen you press the Function Setup switch about 1~2 seconds, you could see the massage as following "...Wait AF..." and 10 second later, the auto focus function would operate. 3. When you press the Function Setup switch for less than 1 second, the one-push auto focus function would immediately operate. 4.
Operating Your Camera A WC →SET : To f ind the optimal setting for the current luminance environment in this mode, set the point the camera towards a sheet of white paper and press the Function Setup Switch. If the environment changes, readjust it. M ANUAL : S elect this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode. After that switch to MANUAL mode, fine-tune the White Balance and then press the Function Setup Switch.
Operating Your Camera O FF : Deactivates the BACKLIGHT function. 3. Select a desired mode moving left or right direction of Function Setup Switch. and press the Function Setup Switch. • Select ‘BLC’ to adjust the area to be enhanced and enhancement level. • S elect ‘HLC’ to adjust the HLC MASK COLOR and LEVEL.
Operating Your Camera ZOOM’ position. • START ZOOM : Moving left or right direction of Function Setup Switch in the ‘START ZOOM’ item to select the zoom position from 1x to 37x to be returned after the ‘SMART ZOOM’ action is over. • TARGET ZOOM : Moving left or right direction of Function Setup Switch in the ‘TARGET ZOOM’ item to select the zoom position from 1x to 37x to be used during MOTION DETECTION.
Operating Your Camera • MANUAL : Select 'MANUAL' and press the Function Setup ZOOM/FOCUS POS SETUP Switch to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions moving directional key of Function Setup Switch while verifying the changes on screen. Press the ↑ : TELE ↓ : WIDE ← : NEAR → : FAR Function Setup Switch on ce desired image quality is obtained. Focus can be manually adjusted, independent of moving zoom.
Operating Your Camera - AUTO : If you turn the power off and on, the zoom magnification level is set to the previous level that was set before the power went off. - MANUAL : The zoom magnification level can be set from 1x to 37x. LENS INIT : Moving left or right direction of Function Setup Switch in the ‘Lens initialization’ item to select ‘Automatic’ or ‘Manual’ and press the SET button to set up the initialization of the lens.
Operating Your Camera 1. Press the Function Setup Switch to access the main setup menu and then position the indicator over 'EXPOSURE' moving up or down direction of Function Setup Switch. 2. Press the Function Setup Switch to confirm. SHUTTER : C ontrol image brightness by adjusting shutter speed. 1 Position the indicator over 'SHUTTER' moving up or down direction of Function Setup Switch. Then select the desired shutter mode (A.FLK, ESC, MANUAL) moving up or down direction of Function Setup Switch.
Operating Your Camera AGC (Auto Gain Control) : For brighter images. 1 Position the indicator over 'AGC' moving up or down direction of Function Setup Switch. 2 Set 'AGC' to the desired mode moving left or right direction of Function Setup Switch. • HIGH • MEDIUM • LOW • MANUAL • OFF : Wide range gain value adjustment : MEDIUM range gain value adjustment : Narrow range gain value adjustment : Selecting gain value range.
Operating Your Camera • MASK TONE : Determine the transparency of selected area as controlling number from 0 to 3. • END : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. DAY/NIGHT : You can display pictures in color or black and white. SPECIAL MAIN SETUP WHITE BAL ATW BACKLIGHT OFF MOTION DET OFF FOCUS EXPOSURE SPECIAL RESET SPECIAL SETUP PRIVACY OFF DAY/NIGHT AUTO DIS OFF COMM ADJ 1.
Operating Your Camera • CAM ID Notes • When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. • You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’. At this time, the exchange between DAY mode and NIGHT mode operates as like selecting ‘COLOR’ mode. • The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable camera operation.
Operating Your Camera • RET PKT : You can choose whether to send an ACK signal when the communication control command is issued to the camera. • COLOR • END Notes • If Camera is controlled by the Vicon Controller,function button may not work properly. : Adjusting this value affects the chroma level only; the burst level is unaffected. : evert back to the USER PRESET menu.
Operating Your Camera 3 Press Function Setup Switch. CAMERA TITLE SETUP ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 ( ) < >-/#¬S!?,. ←→ CLR POS END • LANGUAGE • END or down direction of Function Setup Switch. Then set to ON moving left or right direction of Function Setup Switch. : You ca n select the menu language according to your requirements (Korean, ESPANOL, FRANCAIS, ITALIANO, DEUTSCH, ENGLISH, Japanese, Chinese) : Select this to save the SPECIAL menu settings and return to the SPECIAL menu.
Troubleshooting Specifications • The image on the screen is dark. - Adjust the contrast feature of the monitor. - If you have an intermediate device, set the 75Ω / Hi-z properly. • The camera is not working properly, and the surface of the camera is hot. - Check that you have properly connected the camera to an appropriate power source. • The DAY/NIGHT menu does not work. - Check that AGC of EXPOSURE SETUP menu is ‘OFF’. • The SENS-UP function does not work.
STW Protocol Command Description Command Name Reset Focus Far Focus Near Zoom Wide Zoom Tele ZOOM Direct AF Stop One push AF Command Packet Return Packet Checksum Function Command Packet Return Packet Function Command Packet Return Packet Function Command Packet Return Packet Function Command Packet Return Packet Function Command Packet Return Packet Function Command Packet Return Packet Parameter Function Command Packet Return Packet Function Command Packet Return Packet COLOR CCD CAMERA Byte1 B
STW Protocol Command Description User Preset Save User Preset Exec.
DECLARATION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD MEMO 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SID-370P Beginning Serial NO. C11S4010007 Year of Manufacture 2009. 4.
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE CO., LTD.
