Supreme Resolution WDR Camera SHC-735 User’s Manual Thank you for purchasing a SAMSUNG CCD CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. SALES NETWORK • SAMSUNG TECHWIN CO., LTD. 333-1, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do 462-807, Korea TEL : +82-31-730-8931~3 FAX : +82-31-730-8950 • SAMSUNG OPTO-ELECTRONICS UK, LTD.
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Contents Features Precautions 6 8 Components and Accessories 10 Overview 11 Front View Side View Bottom View Rear View Installation Procedures Lens • When Using Auto Iris Lens • When Using C/CS Mount Lens Connecting a Monitor Connecting Power Control via RS-485 Interface 11 12 13 14 15 How to Use the Camera Function Menu Structure How to Set up the Functions LENS EXPOSURE WHITE BALANCE BACKLIGHT SSNR DAY/NIGHT IMAGE ADJ SPECIAL EXIT 22 22 23 24 26 28 29 31 32 34 36 40 15 19 20 21 Troubleshootin
Features Ultra High Resolution Motion Detection By adopting a double-speed 410,000 pixel Sony CCD, the camera produces clear picture quality with a horizontal resolution of 560 TV lines for color, and 700 TV lines for B/W. Since the camera detects motion and generates signals without any additional external sensors, you can monitor activity more efficiently by connecting the camera to an alarm device.
Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment. Use only under temperature conditions between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install under unstable lighting conditions. May lower image quality. Do not drop the camera or subject it to physical shock. May cause a product malfunction. Never keep the camera face to strong light directly. May damage the CCD.
Components and Accessories Overview Front View 1. Ultra High Resolution WDR Color CCD Camera SHC-735 2. Auto Iris Lens Connector Plug 3. C-Mount Adapter Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. C-Mount Lens Adapter Install this adapter to use a C-Mount Lens. 4. Instruction Manual Back Focus Control Lever Adjust focus by this Back Focus Lever. 5.
Overview Bottom View Side View Auto Iris Lens Connector Used to connect Auto Iris Lens plug. Tripod Mounting Bracket Screw Hole Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows: L 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) You can separate the Tripod Mounting Bracket and install it on the top or bottom of the camera. Make sure to use the Tripod Mounting Bracket when fixing the camera to a bracket or tripod.
Overview Installation Procedures Lens Rear View The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. Notes • It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this camera. • Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the picture quality suffers.
Installation Procedures 3. Remove the cover of the auto iris lens connector plug and solder the lens cable to the connector pin of the plug. • For a Video Drive Lens • For a DC Drive Lens Pin 1: Red (Power) Pin 1: Damping Pin 2: NC Pin 2: Damping + Pin 3: White (Video Signal) Pin 3: Drive + Pin 4: Black (Ground) Pin 4: Drive Lens cable No. 3 Pin No. 1 Pin When Using C/CS Mount Lens Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.
Installation Procedures • When Using a C Mount Lens 1. Remove the protective glass cover at the front of this product and turn the CMount Adapter clockwise to install it. Connecting a Monitor Connect the Video OUT port on the rear panel of the camera to a monitor. CCD Camera 2. Turn the C-Mount lens clockwise to install it. Monitor • Since the connection procedure may differ depending on the type of monitor or peripheral device to be connected, refer to the User Manual for the device to be connected.
Installation Procedures Connecting Power Control via RS-485 Interface Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power. You can connect power as shown in the following figure. For AC / DC power • Since the power specification supports both AC and DC, connect AC 24V, 500mA Adaptor or DC 12V, 500mA Adaptor. The camera can be controlled by using external controllers like a Remote controller.
How to Use the Camera Function Menu Structure How to Set up the Functions You can set up functions using the 5 buttons on the rear of the camera. Setup Menu LENS • DC • VIDEO • MANUAL EXPOSURE • SHUTTER • AGC • SENS-UP LEFT button • RETURN WHITE BALANCE • ATW UP button SET button • MANUAL • AWC SET DOWN button RIGHT button • OUTDOOR • INDOOR BACKLIGHT • OFF • WDR SSNR • ON • OFF • BLC DAY/NIGHT • COLOR • B/W • AUTO • FREEZ • V-REV • H-REV • D-ZOOM • SHARPNESS 1.
How to Use the Camera Select the function using the UP or DOWN button. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR 6.DAY/NIGHT 7.IMAGE ADJ 8.SPECIAL 9.EXIT DC Change the status using the LEFT or RIGHT button. ATW OFF ON AUTO 3. Set up a selected item by using the Left and Right buttons. 4. To finish the setting, select ‘EXIT’ and press the SET button. Notes • An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the SET button.
How to Use the Camera EXPOSURE Notes MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so that the arrow indicates EXPOSURE . 2. Select a desired mode using the Up and Down buttons. • To produce better results with A.FLK, do not use it in conjunction with the WDR mode of the BACKLIGHT menu.
How to Use the Camera White Balance (White Bal.) Notes Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and Down buttons so that the arrow indicates ‘White Bal.’ . 2. Select a desired mode using the Up and Down buttons. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON Select one of the following 5 modes, as appropriate for your purpose.
How to Use the Camera WDR : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. OFF : Deactivates the WDR function. WDR OFF BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly. Notes • You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’ menu is selected. • Since the following symptoms may occur according to the ambient illumination when WDR is selected, set it to OFF.
How to Use the Camera 3. Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction level. 2. Select a desired mode using the Left and Right buttons according to the picture display you want. COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. AUTO : The mode is switched to Color in a normal environment, but switches to B/W mode when ambient illumination is low.
How to Use the Camera D-ZOOM : You can use a digital zoom of x1~x10. IMAGE ADJ. 1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates IMAGE ADJ. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture. 2.
How to Use the Camera Set it to ‘ON’ by using the Left and Right buttons. SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT Notes • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.
How to Use the Camera Enter a title, move the cursor to ’POS’ and press the SET button. The entered title appears on the screen. Select the position to display the title on the screen by using the 4 direction buttons and press the SET button. When the position is determined, select ’END’ and press the SET button to return to the SPECIAL menu.
How to Use the Camera - MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black, White. - TRANSP : Determine the transparency of selected area as controlling number from 0 to 3. - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to external factors such as wind.
Specifications Troubleshooting Problem SHC-735N Solution The Motion Detection function does not work. • Check that MOTION DEF of SPECIAL SETUP menu is ‘OFF’. Color is not correct. • Check the setting of WHITE BAL SETUP menu . The screen flickers continually. • Check that direction of camera turns toward the Sun. RS-485 communication fails. • Check the polarity between RS-485 Control Port and RS-485 cable.
DECLARATION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SHC-735 Beginning Serial NO. S7090001 Year of Manufacture 2007.09.
MEMO
