GSM TELEPHONE SGH-M610 GSM TELEPHONE CONTENTS 1. Safety Precautions 2. Specification 3. Product Function 4. Array course control 5. Exploded View and Parts List 6. MAIN Electrical Parts List 7. Block Diagrams 8. PCB Diagrams 9. Flow Chart of Troubleshooting 10. Reference data 11.
GSPN (Global Service Partner Network) Country North America Latin America CIS Europe China Asia Mideast & Africa This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law. Web Site service.samsungportal.com latin.samsungportal.com cis.samsungportal.com europe.samsungportal.com china.samsungportal.com asia.samsungportal.com mea.samsungportal.com ⓒ Samsung Electronics Co.,Ltd. 2007. 9. Rev.1.
1. Safety Precautions 1-1. Repair Precaution ● Repair in Shield Box, during detailed tuning. Take specially care of tuning or test, because specipicty of cellular phone is sensitive for surrounding interference(RF noise). ● Be careful to use a kind of magnetic object or tool, because performance of parts is damaged by the influence of magnetic force. ● Surely use a standard screwdriver when you disassemble this product, otherwise screw will be worn away. ● Use a thicken twisted wire when you measure level.
Safety Precautions 1-2. ESD(Electrostatically Sensitive Devices) Precaution Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD (Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below. You can prevent from ESD damage by static electricity. ● Remove static electricity remained your body before you touch semiconductor or parts with semiconductor.
2. Specification 2-1. GSM General Specification G SM 90 0 Ph ase 1 EG SM 9 00 Ph ase 2 DCS1800 Ph ase 1 PCS1900 Fr eq. Band[MHz] Uplin k/Down link 8 90~915 9 35~960 8 80~915 9 25~960 17 10~178 5 18 05~188 0 185 0~1910 193 0~1990 ARF CN ra nge 1~124 0~124 & 97 5~1023 5 12~885 51 2~810 T x/Rx spacing 45MHz 45MHz 95MHz 8 0MHz Mo d. Bit r ate/ Bit Period 270 .833kb ps 3 .692u s 270 .833kb ps 3 .692u s 270 .833kb ps 3 .692u s 270 .833kb ps 3.
Speclflcation 2-2.
3. Product Function Main Function - VGA pixel CMOS camera - 65K 128x160 CSTN (1.77”) - Multimidea Message (Picture) - Audio : MP3/AAC/AAC+/eAAC+/WMA - Bluetooth v2.0, USB Full Speed - Black GUI, My Menu, Auto Time Setting SOS message, Mobile Tracker 등 - Stereo FM radio - GPRS : class 10 - Band: 900/1800/1900 - BB: PNX5231,PCF50611 - RF:Silab社, Si4208 - BT/FM : Braodcom BCM2045 / Philips TEA5760UK - Battery: Li-Ion 800mAh (48x36x40) - Size: 99 x 45 x 17.
Product Function 3-2 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
4. Array course control 4-1.
Array course control 4-2. Software Downloading 4-2-1. Pre-requsite for Downloading • Downloader Program(M610 Spansion DownloaderV1.20 for PNX5230 for 0x21600000.exe) • M610 Mobile Phone • Data Cable • Binary file, TFS file 4-2-2. S/W Downloader Program ■ Load the binary download program by executing the “M610 Spansion DownloaderV1.20 for PNX5230 for 0x21600000.exe” 1. Select the connected serial port and the rate of speed 2. Select the check box, the mode you want to download.
Array course control 3.
Array course control 4-4 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
5. Exploded View and Parts List 5-1.
Exploded View and Parts List 5-2.
Exploded View and Parts List Description SEC CODE BAG PE 6902-000634 ADAPTOR-ATADS10EBE,BLK,EU GH44-01702A EARPHONE-EU, BLK, B-TYPE, FM GH59-04928A LABEL(P)-UNIT SEAL GH68-00518B LABEL(P)-IMEI GH68-01335D LABEL(R)-WATER SOAK GH68-09361A MANUAL USERS-EU FRENCH GH68-15945A MANUAL USERS-EU DUTCH GH68-15946A LABEL(R)-MAIN(EU) GH68-15970A CUSHION-CASE(EU) GH69-05866A BOX-UNIT(EU) GH69-05867A RMO RUBBER-BT GH73-11029A MPR-ELEC TAPE GH74-27457A MPR-VINYL BOHO UPPER GH74-27887A MPR-VI
Exploded View and Parts List 5-4 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
6.
Main Electrical Parts List Design LOC Description SEC Code STATUS C212 C213 C214 C215 C216 C300 C301 C302 C303 C304 C305 C306 C307 C308 C311 C312 C313 C314 C315 C316 C317 C318 C319 C320 C321 C322 C323 C324 C325 C326 C327 C328 C329 C330 C331 C400 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412 C413 C414 C415 C416 C417 C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP
Main Electrical Parts List Design LOC Description SEC Code STATUS C418 C419 C420 C421 C422 C424 C425 C426 C429 C430 C431 C432 C433 C436 C437 C438 C439 C440 C441 C442 C443 C500 C501 C502 C503 C504 C505 C507 C508 C509 C511 C512 C513 C514 C601 C603 C604 C605 C606 C609 C610 C611 CN601 DUF100 F101 F600 F601 F602 F603 F604 F605 HEA600 IFC500 C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-TA,CHIP C-CER,CHIP C-CER,CHIP C-CE
Main Electrical Parts List Design LOC Description SEC Code STATUS L100 L101 L102 L103 L104 L105 L106 L107 L111 L300 L400 L401 L402 L403 L500 L501 L502 L504 L601 LED600 LED601 LED602 LED603 LED604 LED605 LED606 LED607 LED608 LED609 OSC100 OSC101 OSC300 PAM100 R102 R103 R105 R114 R118 R119 R121 R122 R200 R201 R202 R203 R204 R207 R210 R213 R214 R215 R216 R218 R-CHIP C-CER,CHIP INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD BEAD-SMD INDUCTOR-SMD INDUCTOR-SMD BEAD-SMD BEAD-SMD INDUCTOR-SM
Main Electrical Parts List Design LOC Description SEC Code STATUS R220 R221 R222 R225 R300 R301 R302 R303 R305 R307 R308 R310 R311 R315 R316 R317 R400 R401 R402 R403 R404 R405 R406 R407 R408 R409 R410 R412 R413 R414 R415 R500 R501 R503 R504 R506 R507 R508 R510 R511 R515 R516 R517 R519 R520 R602 R603 R605 R606 R607 R608 R609 R610 R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP
Main Electrical Parts List Design LOC Description SEC Code STATUS R611 R612 R613 R614 R615 R616 R617 R619 R620 R621 R623 R624 R625 R626 R627 RFS100 TA100 TA300 TA400 TA401 TA402 TA500 U101 U103 U104 U200 U300 U302 U303 U304 U401 U402 U404 U405 U500 U501 U600 U601 U602 U701 UCP200 UME201 VR500 ZD201 ZD300 ZD301 ZD400 ZD401 ZD500 ZD501 ZD502 ZD503 ZD601 R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP CONNECTOR-COAXIAL C-TA,CHIP C-TA,CHIP C-TA,CHIP
Main Electrical Parts List Design LOC Description SEC Code STATUS ZD602 ZD603 ZD604 ZD605 ZD606 ZD607 ZD608 ZD609 DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS 0406-001235 0406-001235 0406-001208 0406-001235 0406-001235 0406-001235 0406-001235 0406-001235 SA SA SA SA SA SA SA SA 6-7 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Main Electrical Parts List 6-8 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
7. Block Diagrams 7-1.
Block Diagrams 7-2.
8.
PCB Diagrams Bottom 8-2 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
9. Flow Chart of Troubleshooting 9-1. Power On ' Power On ' does not work Yes No Check the Battery Voltage Change the Battery is more than 3.4V Yes No Check the PMU related to VINT C322(VISA) = 2.7V? Yes No Check the Clock at Resolder OSC300 R308=32KHZ Yes No C300(VDD_IO_LOW_1.8V) & C301(VDD_IO_HIGH_2.9V) = "H"? Check the related circuit Yes No C327(VDD_GSM_CORE_1.2V) Check the VDD_GSM_CORE_1.2V circuit = 1.
Flow Chart of Troubleshooting 9-2 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-2.
Flow Chart of Troubleshooting 9-4 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-3. Charging Part Abnormal charging part Yes No Check the U303 pin 38 > 4.9V Check the circuit related to V_EXT_CHARGE Yes No U303 pin 34(AUX_ON) = "L"? Check the circuit related to AUX_ON signal Yes No Check the U303 pin 46 Resolder or replace U303 ≒ 1.
Flow Chart of Troubleshooting 9-6 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-4.
Flow Chart of Troubleshooting 9-8 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-5.
Flow Chart of Troubleshooting 9-10 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-6. Speaker Part(Melody) Speaker does not work Yes No U405 pin 7 = 2.9V? Resolder or replace U405 Yes No Check the Clock signal at Pin 1 of U101 (26MHz) Check the clock generation circuit (related to U101 and PAM100) Yes No U405 pin 15,17 ≒ 1.8V? Resolder U405 (When U405 operate) Yes No HEA600 pin 57,58 ≒ 1.
Flow Chart of Troubleshooting 9-12 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-7.
Flow Chart of Troubleshooting 9-8.
Flow Chart of Troubleshooting 9-9.
Flow Chart of Troubleshooting 9-10. Key Back Light Main Key LED does not work Yes No Check the U300 related to "VDD_KEY" U300 pin6 = "H"? Yes U300 pin3 = 3.
Flow Chart of Troubleshooting 9-17 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-11.
Flow Chart of Troubleshooting 9-19 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-12. GSM Receiver RX ON RF input : CH center freq : +67.7kHz Cell Power : -60 dBm Yes No Resolder RFS100, C102, R121, L101 F101 Pin13 ≥ -65dBm Yes No F101 pin1,2 ≥ -65dBm No Check ANT Switch control circuit Check F101 pin9=L, pin11=L Yes Yes Resolder F101 No U101 pin21 ≥ -70dBm pin22 ≥ -70dBm Resolder L106, C114, C119 Yes No U101 pin 4, 5, 6, 7 ≥ 0.2Vp_p Check U101 pin12,13,29,29 ≥ 2.8V pin11 ≥ 1.
Flow Chart of Troubleshooting 9-13. GSM Transmitter TX ON (5Level) No F101 Pin13 ≥ 30dBm Resolder RFS100, C102, R121, L101 Yes No No F101 Pin10 ≥ 30dBm Check FEM Switch control circuit Check F101 pin9=L, pin11=H Yes Yes Change or Resolder F101 No PAM100 Pin11 ≥ 30dBm Resolder C110, C108, L109 Yes No No PAM100 Pin4 ≥ -4dBm Check PAM100 +VBAT(pin17) OK? Yes Yes No U101 pin 4, 5, 6, 7 ≥ 0.2Vp_p Check U101 pin12,13,29,29 ≥ 2.8V pin11 ≥ 1.
Flow Chart of Troubleshooting 9-14. DCS Receiver RX ON RF input : CH center freq : +67.7kHz Cell Power : -60 dBm Yes No F101 Pin13 ≥ -65dBm Resolder RFS100, C102, R121, L101 Yes No F101 pin3,pin4 ≥ -65dBm Check F101 pin9=L, pin11=L No Check ANT Switch control circuit Yes Yes Resolder F101 No U101 pin19 ≥ -70dBm pin20 ≥ -70dBm Resolder L104, C107, C109 Yes No U101 pin4, 5, 6, 7 ≥ 0.2Vp_p Check U101 pin12,13,29,29 ≥ 2.8V pin11 ≥ 1.
Flow Chart of Troubleshooting 9-15. DCS Transmitter TX ON (0Level) No F101 Pin13 ≥ 30dBm Resolder RFS100, C102, R121, L101 Yes No F101 Pin8 ≥ 30dBm Check F101 pin9=H, pin11=L Yes No Yes Check FEM control circuit Change or Resolder F101 No PAM100 Pin15 ≥ 30dBm Resolder C115, L105, C116 Yes No Check PAM100 +VBAT(pin17) OK? PAM100 Pin4 ≥ -4dBm Yes U101 Pin4, 5, 6, 7 ≥ 0.2Vp_p No Check U101 pin12,13,29,29 ≥ 2.8V pin11 ≥ 1.
Flow Chart of Troubleshooting 9-16. PCS Receiver RX ON RF input : CH center freq : +67.7kHz Cell Power : -60 dBm Yes No F101 Pin13 ≥ -65dBm Resolder RFS100, C102, R121, L101 Yes No F101 Pin5,pin6 ≥ -65dBm No Check ANT Switch control circuit Check F101 pin9=L, pin11=L Yes Yes Change or Resolder F101 No U101 Pin17,pin18 ≥ -70dBm Resolder C103, C104, L103 Yes No U101 Pin4, 5, 6, 7 ≥ 0.2Vp_p Check U101 pin12,13,29,29 ≥ 2.8V pin11 ≥ 1.
Flow Chart of Troubleshooting 9-17. PCS Transmitter TX ON (0Level) No F101 Pin13 ≥ 30dBm Resolder RFS100, C102, R121, L101 Yes No F101 Pin14 ≥ 30dBm No Check F101 pin9=H, pin11=L Yes Yes No PAM100 Pin15 ≥ 30dBm Check FEM Switch control circuit Change or Resolder F101 Resolder C115, L105, C116 Yes No Check PAM100 +VBAT(pin17) OK? PAM100 Pin4 ≥ -4dBm Yes No Yes No U101 Pin4, 5, 6, 7 ≥ 0.2Vp_p Check U101 pin12,13,29,29 ≥ 2.8V pin11 ≥ 1.
Flow Chart of Troubleshooting 9-26 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-27 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-18. Bluetooth part Bluetooth does not work DUF100 pin 2 ≥ 4dB No Resolder or replace C123, C128, ANT102 Yes C120, C121 (+positin) ≥ 1.8V No Resolder C120, C121 and check the PMU part Yes No Resolder OSC101,C129,C138,R122 OSC101 pin 3 = 26MHz (1.4Vp_p) Yes C126, C127, C131 ≥ 1.5V No Resolder C126, C127, L107, C131 check or replace U103 Yes R115 ≥ 1.8V C134 ≥ 1.
Flow Chart of Troubleshooting 9-29 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-30 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-19. Radio part Radio does not work No Resolder C437, R409 and check PMU Part C437, R409≥ 2.8V Yes No R406, R410, C431, C432 ≥ 2.
Flow Chart of Troubleshooting 9-32 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-33 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting 9-34 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
10. Reference data Reference Abbreviate - AAC: Advanced Audio Coding. - AVC : Advanced Video Coding.
Reference data 10-2 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
11. Disassembly and Assembly Instructions 11-1. Disassembly Instructions 2 1 1) It ladles 4 screws. 1) it is not born on the rear and not to be it takes care. 1) It removes the SIM card and the battery. 3 4 1) It lifted the rear case and it took off and it put out. 1) It removes a volume KEY. 1) In connection part it inflicted a force with right and left and it took off charily and it put out.
Disassembly and Assembly Instructions 5 6 1) tweezers about under using from Maine PBA it took off FPCB and it put out All. 1) From A`ssy it separates Main PBA. 1) In order for FPCB and connector not to be damaged. 1) In order for FPCB and connector not to be damaged. 2) It does not inflict the force which is unreasonable. 7 8 1) From Front case it removes Main KEY Pad. 1) It ladles the down 2 screw. 1) About under using it took off tweezers and it put out.
Disassembly and Assembly Instructions 10 9 1) From A `ssy it separates UPPER Case. 1) It ladles 2 screws which are on upper direction. 1) In order for the wound not to be born in LOWER Case, 1) About under using it separates tweezers rear case it takes care. section. 11 12 1) From UPPER Case it separates SUB KEY Rubber. 1) From UPPER Case it separates SUB PBA.
Disassembly and Assembly Instructions 11-2. Assembly Instructions 1 2 1) It affixes serve PBA in UPPER Case. 1) It affixes the serve height pad in UPPER Case. 1) It inserts a speaker and camera module first. 1) Sub UPPER slates it fixes KEYPAD 4 HOLE and it assembles. 2) From above it inserts serve PBA in down and. 3) Screw Hole where there is to a both sides and PBA cause of defeat parts are right,It affixes. 4 3 1) It fixes FPCB well in Hole and it inserts 1) It combines A `ssy in UPPER.
Disassembly and Assembly Instructions 6 5 1) It fixes Main KEY Rubber in Front case and. 1) KEY Hole and it fixes Front projections and it assembles. 1) It combines FPCB in Main PBA Connector. 1) 'Tightly ' the sound until at the time of day, press and are combined accurately, It confirms. 7 8 1) It inserts volume KEY in side part and. 1) It inserts Main PBA in front. 1) It fixes Screw hole and PBA hole and it inserts. 1) Fix the shape and put in and are inserted well, it is confirmed.
Disassembly and Assembly Instructions 9 10 1) It inflicts a lower part comfort force and 'tightly ' the sound until at the time of day, it presses. 1) It combines REAR Case in A `ssy. 1) It fixes Hook and from lower part it combines. 11 12 1) It picks up SIM Card and Battery and it puts in and Battery Cover it closes. 1) It contracts the screw in 4 halls. 1) It inflicts the force which is suitable and it contracts.
