Copyright © 2009 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • • • Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. JPEG License: This software is based in part on the work of the Independent JPEG Group.
Contentds ABOUT THIS USER’S GUIDE Convention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Finding more information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Features of your new product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 INTRODUCTION Machine overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COPYING Basic copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the settings for each copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the darkness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the type of originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reducing or enlarging copies . . . . . . . . . . . . . . . . . .
Cleaning the drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storing the Toner cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handling instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use of non-Samsung and refilled toner cartridge . . . . . . . . . . . . . . . . . . . . . . . Estimated cartridge life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety information These warnings and precautions are included in order to prevent injury to you and others, as well as preventing any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and instructions marked on the machine and in the accompanying literature.
If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine. ► This could result in electric shock or fire. Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. ► This could result in electric shock or fire. Be careful, the paper output area is hot. ► Burns could occur.
Installation / Moving Warning Do not place the machine in an area with dust, humidity or water leaks. ► This could result in electric shock or fire. Caution When moving the machine, turn the power off and disconnect all cords; then lift the machine with at least two people. Do not put a cover over the machine or place it in an airtight location, such as a closet. ► If the machine is not well-ventilated, this could result in fire. ► The machine could fall, causing human injury or machine damage.
Keep the power cable and the contact surface of the plug clean from dust or water. To clean and operate the machine, strictly follow the user's guide provided with the machine. ► This could result in electric shock or fire. ► Otherwise, it can cause damage to the machine. Do not remove any covers or guards that are fastened with screws. ► The machine should only be repaired by Samsung service technician. Supply usage Caution Do not disassemble the toner cartridge.
Regulatory information This machine is designed for our sound environment and certified with several regulatory statements. Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous.
Recycling Recycle or dispose of the packaging material for this product in an environmentally responsible manner. China only Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Radio Frequency Emissions FCC Information to the User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
The Telephone Company may make changes in its communications facilities, equipment operations or procedures where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68.
Important warning: You must earth this machine. The wires in the mains lead have the following color code: • Green and Yellow : Earth • Blue : Neutral • Brown : Live If the wires in the mains lead do not match the colors marked in your plug, do the following: You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green. You must connect the blue wire to the pin which is marked with the letter “N” or colored black.
China only Regulatory information_ 14
About this user’s guide 1. This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during actual usage. Valuable for both novice and professional users can refer to this as a guide for installing and using the machine. • • • • Read the safety information before using the machine. If you have a problem using the machine, refer to the troubleshooting chapter (See "Troubleshooting" on page 53).
Finding more information You can find information for setting up and using your machine from the following resources, either as a print-out or on screen. MATERIAL NAME DESCRIPTION Quick Install Guide This guide provides information on setting up your machine and this requires that you follow the instructions in the guide to prepare the machine. Samsung website If you have Internet access, you can get help, support, manuals, and order information from the Samsung website, www.samsung.con/printer.
Features of your new product Your new machine is equipped with a number of special features that improve the quality of the documents you print. Special Features Print with excellent quality and speed • • You can print with a resolution of up to 600 x 600 dpi. Your machine prints A4-sized paper at up to 18 ppm and letter-sized paper at up to 19 ppm. Handle high capacity of paper • The 250-sheet tray supports plain paper.
Introduction 1.
Rear view 1 Extension telephone socket (EXT) 4 Rear door 2 Telephone line socket 5 Rear door handle 3 Power receptacle Introduction_ 19
Control panel overview 1 one-touch dial Stores frequently-dialed fax number (See "Storing a number for One-touch Dialing" on page 39). 2 Reduce/Enlarge Makes a copy smaller or larger than the original. 3 Delay Send Allows you to send a fax at a later time when you will not be present (See "Delaying a fax transmission" on page 34). 4 Multi Send Allows you to send a fax to multiple destinations (See "Sending a fax to multiple destinations" on page 34).
Understanding the Status LED The color of the status LED indicates the machine's current status. STATUS DESCRIPTION • • Off The machine is off-line. The machine is in power saver mode. When data is received, or any button is pressed, it switches to on-line automatically. Green: Online ( ) Blinking When the backlight blinks rapidly, the machine is printing data. On The machine is on-line and can be used.
Basic setup 2. You may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter gives you step-by-step instructions for setting up the machine.
8. Turn the machine on. This equipment will be inoperable when mains power fails. Changing the display language To change the language that appears on the display, follow the steps below: 1. Press Menu until Machine Setup appears. 2. Press the left/right arrow until Language appears and press OK. 3. Press the left/right arrow to display the language you want. 4. Press OK to save the selection. 5. Press Stop/Clear to return to ready mode.
1. Press (Fax) on the control panel. 2. Press On Hook Dial. A dial tone sounds from the speaker. 3. Press the left/right arrow until you hear the volume you want. 4. Press On Hook Dial to save the change and return to ready mode. To adjust the volume using the handset: 1. Pick up the handset. A dial tone sounds from the earpiece. 2. Press the left/right arrow until you hear the volume you want. 3. Press OK to save the change and replace the handset.
Using the save modes Using toner saving feature Toner save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge beyond what one would experience in the normal mode, but it reduces print quality. 1. Press Menu until Machine Setup appears. 2. Press the left/right arrow until Toner Save appears and press OK. 3. Press the left/right arrow until On appears and press OK. 4. Press Stop/Clear to return to ready mode.
Media and tray 3. This chapter provides information on how to load originals and print media into your machine. This chapter includes: • • • • • • • Preparing originals Loading originals Selecting print media Changing the tray size Loading paper in the tray Setting the paper size and type Using the output support Preparing originals • • • • • • Do not load paper smaller than 148 x 148 mm (5.8 x 5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches).
3. Load the original face down into the document feeder. Make sure that the bottom of the original stack matches the paper size marked on the document input tray. 4. Adjust the document width guides to the paper size. Selecting print media Always use print media that meet the guidelines for use with your machine.
The amount of paper put into the tray may differ according to media type used (See "Print media specifications" on page 71). Media sizes supported in each mode MODE SIZE SOURCE Copy mode Letter, A4, Legal, Folio, Executive, JIS B5, A5 tray 1 Fax mode Letter, A4, Legal tray 1 Changing the tray size The tray is preset to Letter or A4 size, depending on your country. To change the size, you need to adjust the paper guides. 1 2 3 4 Support guide Paper length guide Guide lock Paper width guide 1.
4. Squeeze the paper width guides and slide them to the desired paper size marked at the bottom of the tray. • • Do not push the paper width guide too far causing the media to warp. If you do not adjust the paper width guide, it may cause paper jams. • Do not use a paper with more than 6 mm curl. Loading paper in the tray Tray 1 1. Pull out the paper tray. And adjust the tray size to the media size you are loading (See "Changing the tray size" on page 28). 2.
Letterhead/ Preprinted paper SINGLE-SIDED Tray1 • • • • Face down DOUBLE-SIDED Face up Letterhead/ Preprinted paper must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine’s fusing temperature for 0.1 second. Check your machine’s specification to view the fusing temperature (about 170°C (338 °F)). Letterhead/ Preprinted paper ink must be non-flammable and should not adversely affect machine rollers.
Copying 4. This chapter gives you step-by-step instructions for copying documents. This chapter includes: • • • • Basic copy Changing the settings for each copy Changing the default copy settings Setting copy timeout Basic copy This is the normal and usual procedure for copying your originals. 1. Press (Copy) on the control panel. 2. Load originals face down into the document feeder (See "In the document feeder" on page 26). 3.
5. Press the left/right arrow until the size setting you want appears and press OK. 6. Press Stop/Clear to return to ready mode. To scale the copy by directly entering the scale rate: 1. Press (Copy) on the control panel. Press Menu until Copy Setup appears. Press the left/right arrow until Default-Change appears and press OK. Press the left/right arrow until Reduce/Enlarge appears and press OK. Press the left/right arrow until Custom appears and press OK.
Faxing 5. This chapter gives you information about using your machine as a fax machine. This chapter includes: • • • • • • • Preparing to fax Sending a fax Receiving a fax Adjusting the document settings Forwarding a fax to other destination Setting up address book Printing sent fax report automatically • • You cannot use this machine as a fax via the internet phone. For more information ask the internet service provider.
5. Press Start on the control panel. The machine starts to scan and send a fax to destinations. When you want to cancel a fax job, press Stop/Clear before the machine start transmission. Sending a fax manually This method is sending a fax using On Hook Dial on the control panel. 1. Press 2. 3. 4. 5. 6. (Fax) on the control panel. Load originals face down into the document feeder. Adjust the resolution and the darkness to suit your fax needs (See "Adjusting the document settings" on page 38).
You can press speed dial numbers or select group dial number using Address book button. For details, see "Setting up address book" on page 39. 6. The display asks you to enter another fax number to send the document. 7. To enter more fax numbers, press OK when Yes appears and repeat steps 5. You can add up to 10 destinations. Once you entered a group dial number, you cannot enter another group dial numbers anymore. 8.
Receiving a fax This part explains how to receive a fax, and the special receiving methods available. Changing the receive modes Your machine is preset to Fax mode at the factory. When you receive a fax, the machine answers the call on a specified number of rings and automatically receives the fax. But if you want to change the Fax mode to another mode, follow the steps below: (Fax) on the control panel. 1. Press 2. Press Receive Mode on the control panel. 3.
Receiving faxes using DRPD mode Distinctive Ring is a telephone company service which enables an user to use a single telephone line to answer several different telephone numbers. The particular number someone uses to call you is identified by different ringing patterns, which consist of various combinations of long and short ringing sounds.
Adjusting the document settings Before starting a fax, change the following settings according to your original’s status to get the best quality. Resolution The default document settings procedure good results when using typical text-based originals. However, if you send originals that are of poor quality, or contain photographs, you can adjust the resolution to produce a higher quality fax. 1. Press (Fax) on the control panel. 2. Press Resolution on the control panel. 3.
7. Enter the ending time using left/right arrow or numeric keypad and press OK. 8. Press Stop/Clear to return to ready mode. Subsequent received faxes will be forwarded to the specified fax machine. Setting up address book You can set up Address Book with the fax numbers you use most frequently. Your machine provides you with the following features for setting up Address Book: Before beginning to store fax numbers, make sure that your machine is in Fax mode.
Group dial numbers If you frequently send the same document to several destinations, you can group these destinations and set them under a group dial number. You can then use a group dial number to send a document to all of the destinations within the group. You can set up to 250 (0 through 249) group dial numbers using the destination’s existing speed dial numbers. Registering a group dial number 1. Press 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. (Fax) on the control panel.
1. Press (Fax) on the control panel. 2. Press Address Book on the control panel. 3. Press the left/right arrow until Print appears and press OK. The machine begins printing. Printing sent fax report automatically You can set the machine to print a report with detailed information about the previous 50 communication operations, including time and dates. 1. Press 2. 3. 4. 5. (Fax) on the control panel. Press Menu until Fax Setup appears. Press the left/right arrow until Auto Report appears and press OK.
Machine status and advanced feature 6. This chapter explains how to browse the current status of your machine, and the method of setting for the advanced machine setup. Read this chapter carefully in order to use your machine's diverse features. This chapter includes: • • • • • Fax setup Copy setup Printing a report Clearing memory Menu overview Fax setup Changing the fax setup options Your machine provides you with various user-selectable options for setting up the fax system.
OPTION DESCRIPTION Discard Size When receiving a fax containing pages as long as or longer than the paper in your machine, you can set the machine to discard a specific length from the end of the received fax. The machine will print the received fax on one or more sheets of paper, minus the data that would have been on the specified discard segment.
OPTION ECM Mode DESCRIPTION This mode helps with poor line quality and makes sure any faxes you send are sent smoothly to any other ECM-equipped fax machine. Sending a fax using ECM may take more time. Copy setup Changing the copy setup options For copy output, you can set up several options in advance. 1. Press Copy on the control panel. 2. Press Menu until Copy Setup appears. 3. Press the left/right arrow until Default-Change appears and press OK. 4.
3. 4. 5. 6. Press the left/right arrow until the item you want to clear appears and press OK. Press OK when Yes appears to confirm clearing. Repeat steps 3 through 4 to clear another item. Press Stop/Clear to return to ready mode. Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine. OPTION DESCRIPTION Clear All Mem. Clears all of the data stored in memory and resets all of your settings to the factory default.
Menu overview The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing Menu. Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine. ITEMS OPTION Paper Setting Paper Type Paper Size Tray Paper Copy Setup Default-Change Darkness Original Type Reduce/Enlarge No.
ITEMS OPTION Machine Setup Machine ID Date & Time Clock Mode Dial Mode Language Toner Save Power Save Clear Toner Maintenance Clean Drum Notify Toner Clear Memory Clear All Mem.
Maintenance 7. This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • • • Cleaning a machine Storing the Toner cartridge Tips for moving & storing your machine Cleaning a machine If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep the best printing condition and use your machine longer.
3. With a dry, lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area. While cleaning the inside of the machine, be careful not to damage the transfer roller or any other inside parts. Do not use solvents such as benzene or thinner to clean. Printing quality problems can occur and cause damage to the machine. 4. Locate the long strip of glass (LSU) inside the machine and gently swab the glass to see if dirt turns the white cotton black. 5.
The right end of the white roller has a plastic bush that is snapped shut with small tab on it. Pull the tab inward slightly then lift the tab until the roller is released. Lift the roller upwards and to the right, releasing the left end of the roller, then rotate the bushing until it reach a slot. Then pull the roller upward. 4. Wipe the roller surface with a soft cloth dampened with water. 5. Carefully wipe the scanning glass with a soft dry cloth.
7. Reconnect the support and the control panel and then close the control panel firmly until it clicks into place. Cleaning the drum If there are streaks or spots on your machine, the OPC drum of the cartridge may require cleaning. 1. Before setting the cleaning procedure, make sure that paper is loaded in the machine. 2. Press Menu until Maintenance appears. 3. Press the left/right arrow until Clean Drum appears and press OK. 4. Press the left/right arrow until On appears and press OK.
Tips for moving & storing your machine • When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or bad print quality.
8. Troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • • • • • • • Redistributing toner Clearing original document jams Tips for avoiding paper curls Tips for avoiding paper jams Clearing paper jams Understanding display messages Solving other problems Redistributing toner When the toner cartridge is near the end of its life: • White streaks or light printing occurs. • Prepare new cartridge appears on the display.
correct position until it locks into place completely. 5. Close the front door. Ensure that the cover is securely closed. Clearing original document jams When an original jams while passing through the document feeder, a warning message appears on the display screen. To avoid tearing the document, remove the jammed document slowly and gently. Input Misfeed 1. Remove any remaining pages from the document feeder. 2. Pull the jammed document gently out of the document feeder. 3.
Exit Misfeed 1. Remove any remaining pages from the document feeder. 2. Open the control panel by gripping it on the bottom edge and pulling it. 3. Pull the document gently out of the document feeder. 4. Close the control panel. Then load the documents back into the document feeder. Tips for avoiding paper curls 1. Open the rear door. 2. Pull down the pressure lever on each side. 1 Pressure lever Keep the rear cover opened during printing. Only use when the printout has more than 20 mm curl.
Tips for avoiding paper jams By selecting the correct media types, most paper jams can be avoided. When a paper jam occurs, refer to the next guidelines. • Ensure that the adjustable guides are positioned correctly (See "Loading paper in the tray" on page 29). • Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. • Do not remove paper from the tray while your machine is printing. • Flex, fan, and straighten paper before loading.
Inside the machine Click this link to open an animation about clearing a jam. The fuser area is hot. Take care when removing paper from the machine. 1. Open the front door and pull the toner cartridge out, lightly pushing it down. 2. Remove the jammed paper by gently pulling it straight out. 3. Replace the toner cartridge and close the front door. Printing automatically resumes. In exit area Click this link to open an animation about clearing a jam. 1. Open and close the front door.
2. Gently pull the paper out of the output tray. If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step. 3. Open the rear door. 4. Pull the pressure levers down and remove the paper. 1 Pressure lever If you do not see the jammed paper, go to next step. 5. Pull the fuser cover levers down and remove he paper. Return the pressure levers to their original position. The fuser area is hot. Take care when removing paper from the machine. 6.
Understanding display messages Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables below to understand the messages’ and their meaning, and correct the problem, if necessary. Checking display messages • • • If a message is not in the table, restart the machine and try the desired job again. If the problem persists, call for service. When you call for service, provide the service representative with the contents of display message.
MESSAGE MEANING SUGGESTED SOLUTIONS Operation Not Assigned You are doing in the Add/Cancel operation, but there is no jobs waiting. Check the display to see if there is any scheduled job. The display should indicate them in standby mode, for example, Delay Fax. [Paper Jam 0] Open/Close Door Paper has jammed in the feeding area of the paper tray. Clear the jam (See "In tray 1" on page 56). [Paper Jam 1] Open/Close Door Paper has jammed in the paper exit area.
Solving other problems The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, call for service. Paper feeding problems CONDITION SUGGESTED SOLUTIONS Paper jams during printing. Clear the paper jam (See "Clearing paper jams" on page 56). Paper sticks together. • • • • Check the maximum paper capacity of the tray (See "Print media specifications" on page 71).
CONDITION Light or faded print SUGGESTED SOLUTIONS • • • • Toner specks A aB bC c A aB bC c A aB bC c A aB bC c A aB bC c Dropouts A aBb C A aBb C A aBb C A aBb C A aBb C • • • If a vertical white streak or faded area appears on the page, the toner supply is low. You may be able to temporarily extend the toner cartridge life (See "Redistributing toner" on page 53). If this does not improve the print quality, install a new toner cartridge.
CONDITION SUGGESTED SOLUTIONS Black background If the amount of background shading becomes unacceptable: • Change to a lighter weight paper (See "Print media specifications" on page 71). • Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount of background shading. • Remove the old toner cartridge and, install a new one (See "Replacing the toner cartridge" on page 68).
CONDITION SUGGESTED SOLUTIONS • • • Ensure that the paper is loaded properly. Check the paper type and quality (See "Print media specifications" on page 71). Ensure that the guides are not too tight or too loose against the paper stack. • • • Ensure that the paper is loaded properly. Check the paper type and quality. Both high temperature and humidity can cause paper curl (See "Print media specifications" on page 71). Turn the stack of paper over in the tray.
CONDITION Loose toner SUGGESTED SOLUTIONS • • • • Character Voids A Horizontal stripes A aBb C A aBb C A aBb C A aBb C A aBb C Clean the inside of the machine (See "Cleaning the inside" on page 48). Check the paper type and quality (See "Print media specifications" on page 71). Remove the toner cartridge and then, install a new one (See "Replacing the toner cartridge" on page 68). If the problem persists, the machine may require repair. Contact a service representative.
CONDITION Frequent copy paper jams occur. SUGGESTED SOLUTION • • • Toner cartridge produces fewer copies than expected before running out of toner. • • Fan the stack of paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if necessary. Ensure that the paper is the proper paper weight. Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared.
Supplies and accessories 9. This chapter provides information on purchasing supplies, accessories and maintenance parts available for your machine. This chapter includes: • • • • How to purchase Available supplies Available maintenance parts Replacing the toner cartridge Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available accessories.
AVERAGE YIELDa PARTS PART NAME Document feeder rubber pad Approx. 10,000 pages RMO ADF RUBBER White roller Approx. 50,000 pages ROLLER-WHITE Fuser unit Approx. 50,000 pages FUSER Pickup roller Approx. 50,000 pages ROLLER-PICK UP Cassette pad unit Approx. 50,000 pages CASSETTE a. It will be affected by media type, media size and job complexity. To purchase maintenance parts, contact the source where you bought the machine.
5. Locate the sealing tape at the end of the toner cartridge. Carefully pull the tape completely out of the cartridge and discard it. • • The sealing tape should be longer than 60 cm when correctly removed. Holding the toner cartridge, pull the sealing tape straight to remove it from the cartridge. Be careful not to cut the tape. If this happens, you cannot use the toner cartridge. • Refer to the helpful pictures on the cartridge wrapping paper. 6.
Specifications 10. This chapter guides you about this machine’s specifications such as various features. This chapter include: • • • • Hardware specifications Environmental specifications Electrical specifications Print media specifications The specification values here are based on preliminary data. See www.samsung.com/printer for current information. Hardware specifications ITEM Dimension DESCRIPTION Height 293.7 mm (11.5 inches) Depth 391.2 mm (15.4 inches) Width 360 mm (14.
Print media specifications TYPE SIZE DIMENSIONS PRINT MEDIA WEIGHTa/ CAPACITYb TRAY1 Plain paper Letter 216 x 279 mm (8.50 x 11.00 inches) Legal 216 x 356 mm (8.50 x 14.00 inches) US Folio 216 x 330 mm (8.50 x 13.00 inches) A4 210 x 297 mm (8.27 x 11.69 inches) 2 60 to 120 g/m (16 to 32 lb bond) • 250 sheets of 80 g/m2 (20 lb bond) Oficio 216 x 343 mm (8.50 x 13.50 inches) JIS B5 182 x 257 mm (7.17 x 10.12 inches) ISO B5 176 x 250 mm (6.93 x 9.84 inches) Executive 184 x 267 mm (7.
Contact SAMSUNG worldwide If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. COUNTRY/REGION CUSTOMER CARE CENTER WEB SITE ARGENTINE 0800-333-3733 www.samsung.com/ar AUSTRALIA 1300 362 603 www.samsung.com/au AUSTRIA 0810-SAMSUNG (7267864, € 0.07/min) www.samsung.com/at BELGIUM 02 201 2418 www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) BRAZIL 0800-124-421 4004-0000 www.samsung.com/br CANADA 1-800-SAMSUNG (726-7864) www.
COUNTRY/REGION CUSTOMER CARE CENTER WEB SITE LUXEMBURG 02 261 03 710 www.samsung.com/lu MALAYSIA 1800-88-9999 www.samsung.com/my MEXICO 01-800-SAMSUNG (726-7864) www.samsung.com/mx NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/min) www.samsung.com/nl NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com/nz NICARAGUA 00-1800-5077267 www.samsung.com/latin NORWAY 3-SAMSUNG (7267864) www.samsung.com/no PANAMA 800-7267 www.samsung.
Glossary The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user’s guide. 802.11 802.11 is a set of standards for wireless local area network (WLAN) communication, developed by the IEEE LAN/MAN Standards Committee (IEEE 802). 802.11b/g 802.11b/g can share same hardware and use the 2.4 GHz band. 802.11b supports bandwidth up to 11 Mbps; 802.11g up to 54 Mbps. 802.
CSV Comma Separated Values (CSV). A type of file format, CSV is used to exchange data between disparate applications. The file format, as it is used in Microsoft Excel, has become a pseudo standard throughout the industry, even among non-Microsoft platforms. DADF A Duplex Automatic Document Feeder (DADF) is a mechanism that will automatically feed and flip over an original sheet of paper so that the machine can scan on both sides of the paper.
Ethernet Ethernet is a frame-based computer networking technology for local area networks (LANs). It defines wiring and signaling for the physical layer, and frame formats and protocols for the media access control (MAC)/data link layer of the OSI model. Ethernet is mostly standardized as IEEE 802.3. It has become the most widespread LAN technology in use during the 1990s to the present. EtherTalk A suite of protocols developed by Apple Computer for computer networking.
IPM The Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM rate indicates the number of single-sided sheets a printer can complete within one minute. IPP The Internet Printing Protocol (IPP) defines a standard protocol for printing as well as managing print jobs, media size, resolution, and so forth.
MMR Modified Modified READ (MMR) is a compression method recommended by ITU-T T.6. Modem A device that modulates a carrier signal to encode digital information, and also demodulates such a carrier signal to decode transmitted information. MR Modified Read (MR) is a compression method recommended by ITU-T T.4. MR encodes the first scanned line using MH. The next line is compared to the first, the differences determined, and then the differences are encoded and transmitted.
PRN file An interface for a device driver, this allows software to interact with the device driver using standard input/output system calls, which simplifies many tasks. Protocol A convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints. PS See PostScript.
Toner Cartridge A kind of bottle within a machine like printer which contains toner. Toner is a powder used in laser printers and photocopiers, which forms the text and images on the printed paper. Toner can be melted by the heat of the fuser, causing it to bind to the fibers in the paper. TWAIN An industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program.
Index delay sending 34 multi sending 34, 35 redialing the last number 34 sending a fax 33, 35 A adjusting tray size 25 answering machine/fax 36 fax setup 42 authentication faxing address book 39, 38 changing receiving mode 36, 42, 43 delaying a fax transmission 34 forwarding faxes 38 group dial 40 preparing to fax 33 receiving 36, 37, 36, 34 sending 33, 35, 33, 39 printing a report 44 C cleaning inside 48 outside 48, 51 cleaning a machine 48 control panel 20 features 17 machine features 42, 70
T time setting 23 toner cartridge estimated life 51 handling instructions 51 non-Samsung and refilled 51 redistributing toner 53, 68 storing 51 toner save mode 25 tray adjusting the width and length 28 changing the tray size 28 setting the paper size and type 30 turning on the machine 21 Index_ 82
