Εγχειρίδιο χρήσης

Error Lamp
If there are error conditions, the lamps on the front of your
SmartJet are lit up or blink. The lamps indicate:
Lamp Status Description
¥ The SCAN/FAX lamp glows red.
¥ Fax communication error occurs. The SCAN/FAX lamp will
be off after 4 seconds.
¥ The SCAN/FAX lamp glows red.
¥ Paper is jammed in the automatic paper feeder. To clear
jam, see page 3.6.
¥ Paper is not loaded in the automatic paper feeder.
¥ Document is not loaded.
¥ Document is jammed in the manual feed. To clear jam, see
page 3.6.
¥ The print cartridge is not installed or installed improperly.
¥ The cartridge type is not correct. For example, you have
installed a colour cartridge when you receive a fax or make
a copy.
¥ The colour of the SCAN/FAX lamp is red.
¥ The print cartridge runs out of ink.
¥ The colour of the SCAN/FAX lamp is red.
¥ The SmartJet memory is full.
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
3.13
Troubleshooting
3 Troubleshooting
on off blinking
07-Troubleshooting 2/5/99 9:42 AM Page 13