Εγχειρίδιο χρήσης

Symptom
Light or blurred characters
Smudged or dark characters
Characters with white lines
Cause and Solution
¥ You may be using ÔFast DraftÕ print quality or ÔNormalÕ
mode. Try using ÔHighÕ print quality. See page 2.5.
¥ The print cartridge may be running out of ink. Replace the
print cartridge. See page 3.20. The Status monitor shows the
amount of ink left in the cartridge.
¥ Make sure that you are using the correct type of paper. Try
another type of paper.
¥ You may be printing on the wrong side of the paper.
¥ The print head may need cleaning. See ÔPrint Cartridge
Nozzle TestÕ on page 3.15.
¥ Make sure that you are using the correct type of paper. Try
another type of paper.
¥ Make sure that the paper is straight and unwrinkled.
¥ Let ink dry before handling the paper. You can use ÔDry
Time DelayÕ check box in the print setting. See page 2.5.
¥ Change the ÔPrint QualityÕ setting to ÔFast Draft.Õ See page
2.5.
¥ The print head may need cleaning. See ÔPrint Cartridge
Nozzle TestÕ on page 3.15.
¥ The print cartridge may be running out of ink. Replace the
print cartridge. The Status monitor shows the amount of
ink left in the cartridge.
¥ Remove and reinstall the print cartridge. See ÔReplacing the
Print CartridgeÕ on page 3.20.
¥ The print head may need cleaning. See ÔPrint Cartridge
Nozzle TestÕ on page 3.15.
¥ If printing on transparencies, try changing the fill pattern in
your application software.
Print Quality is Poor
3.4
Troubleshooting
07-Troubleshooting 2/5/99 9:42 AM Page 4