SAMSUNG Inkjet Telephone Fax User’s Guide SF-370 series
Important Precautions and Safety Information When using this fax machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 1 Read and understand all instructions. 2 Use common sense whenever operating electrical appliances. 3 Follow all warnings and instructions marked on the product and in the literature accompanying the product.
13 Unplug the machine from the telephone jack, PC, and AC wall outlet, and refer servicing to qualified service personnel under the following conditions: • • • • • • When any part of the power cord, plug, or connecting cable is damaged or frayed. If liquid has been spilled into the product. If the product has been exposed to rain or water. If the product does not operate properly after instructions have been followed. If the product has been dropped, or the cabinet appears damaged.
Chapter 1: Setup and Copying List of features .......................................................................................................................................................... Familiarizing yourself with your new machine ........................................................................................................ Front view ......................................................................................................................................................
To erase all recorded messages .......................................................................................................................... Using the answering machine from a remote phone ................................................................................................ Accessing the machine ....................................................................................................................................... Using remote commands .................................
Cleaning the document scanner ................................................................................................................................ 8.2 Replacing the print cartridge .................................................................................................................................... 8.3 Cleaning the printhead .............................................................................................................................................. 8.
Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding Samsung products, contact the SAMSUNG customer care center. Country Country ARGENTINE AUSTRALIA AUSTRIA BELGIUM BRAZIL Customer Care Center 0800-333-3733 1300 362 603 0800-SAMSUNG (726-7864) Web Site www.samsung.com/ar www.samsung.com/au www.samsung.com/at 0032 (0)2 201 24 18 www.samsung.com/be 0800-124-421 www.samsung.com/br 4004-0000 CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca CHILE 800-726-7864 (SAMSUNG) www.samsung.
CHAPTER 1 SETUP AND COPYING This chapter describes the preliminary setup procedure. A full installation instruction is explained in the separate Quick Install Guide. If you are installing or reinstalling the machine from the beginning, refer to the Quick Install Guide provided with the machine.
List of features This machine was designed using the latest technology. It is a full-featured, high-performance machine that not only meets, but also exceeds industry standards. The following is a list of its many exciting features: Common features to SF-370 Series (SF-370/SF-371P/SF-375TP) • • • • • • • • • • • • • • • • • • • • Save Ink (See "Copying/receiving in Ink Save mode" on page 1.8.) Inkjet printing on plain paper 14.
SETUP AND COPYING Familiarizing yourself with your new machine Take a moment to familiarise yourself with your new machine by looking at the pictures on the next few pages. SETUP AND COPYING Front view2 Paper Support SETUP AND COPYING Document Tray Paper Guide Dust Cover Handset SETUP AND COPYING Document Guide SETUP AND COPYING Rear view SETUP AND COPYING USB Connector (SF-371P/SF-375TP) 2.
Control Panel No Button name Function 1 Rcv.mode/Darkness This button has two functions: When no document is loaded, pressing this button changes the Receive Mode. When a document is loaded, the pressing this button changes the darkness. 2 Resolution Improves the clarity of a document you are sending or copying. 3 Cartridge Change Used to install a new cartridge or replace an old one. 4 My Favorites Used to store the document used frequently and send it conveniently.
SETUP AND COPYING To receive faxes or make copies, you should load the paper in the ASF3. You can load approximately 50 sheets of paper. Before loading the paper, see if the paper size is set correctly in the System Setup. For more information, see "Paper Size" on page 6.10. Pull the Dust Cover toward you. 3 Fan the papers and insert them into the ASF with the print side face up. 4 Squeeze the Paper Guide, and move it to the right to match the width of the paper.
Making a copy If you want to save ink while copying or receiving a fax, see "Copying/receiving in Ink Save mode" on page 1.8. 1 Turn the page face down and insert it into the document feeder. 2 Adjust the document guide to match the width of the document. 3 Feed the document into the machine. 4 Adjust the resolution by pressing Resolution. 5 Press Start Copy. Document Guide • The display shows Number of Copies. 6 Enter the number of copies you want, and press OK. • The display shows Zoom Rate.
1 Press Menu. 2 Press Left/right arrow buttons to choose SET SYSTEM ID and press OK. 3 Press OK when the display shows Fax Number. 4 Enter the fax number to which your machine is connected. You can enter up to 20 digits, and include special characters (space, plus sign, etc.) To enter a delimiter, press #. To enter plus symbol (+), press *. If you enter a wrong number, use Left/right arrow buttons to move to the number and correct it.
Keypad character assignments Key Assigned numbers, letters, or characters Assigned numbers, letters, or characters Key 1 (Space) 1 6 M N O 6 2 A B C 2 7 P Q R S 7 3 D E F 3 8 T U V 8 4 G H I 4 9 W X Y Z 9 5 J K L 5 0 (Symbols) + - , . ’ / * # & 0 Copying/receiving in Ink Save mode Your machine has an Ink Save mode to optimize consumption of ink when copying and receiving a fax. 1 Press Menu. 2 Press Left/right arrow buttons to choose SETUP SYSTEM and press OK.
CHAPTER 2 PROGRAMMING AND DIALLING
Making a phone call Your new machine provides many ways for making a phone call. You can use either of following: • • • • On-Hook dialling Phone book dialling (One-Touch and Speed dial) redialling manual dialling via the handset as you do with a regular telephone Speaker Phone dialling You do not need to pick up the handset to make a phone call. When dialling, just press the Speaker Phone (or On Hook Dial) button and enter the numbers.
Enter the name and press OK. • If you do not want a name, just skip this step by pressing OK. If you have subscribed to a Caller ID service, it is recommended you enter a name. • You can assign up to 20 characters to a name. See "How to enter letters" on page 1.7. Press Stop/Clear to exit. PROGRAMMING AND DIALLING 6 Editing a number in the Phonebook 1 Press Phone Book button.
Deleting a number in the Phonebook 1 Press Phone Book. 2 Press Left/right arrow buttons to choose Delete and press OK. • The display shows Speed [00-99]>##. 3 Enter a two-digit (00 ~ 99) number you want to delete and press OK. • Select ‘Y ’ and press OK when asked Delete? Y/N 4 Press Stop/Clear to exit. Redialling You can redial the number last called or one of ten unique numbers recently stored in memory. To redial the last number called 1 Press Redial/Pause.
CHAPTER 3 THE FAX MACHINE
Sending a fax Sending a fax is very simple if you follow the instructions starting from here. They will describe how to load the document, set the resolution/contrast and dial the number. Loading documents 1 Load your document(s) top down in the document tray with the printed side facing away from you. • Be sure that your document is dry and free of staples, paper clips, and other foreign objects. • For more information on what kind of paper you can use for documents, see "Acceptable documents" on page 3.
1 Turn the page face down and insert it into the document feeder. For more information, see "Loading documents" on page 3.2. 2 Press Resolution as many times as you want to adjust the sharpness and clarity. • STANDARD works well for printed or typewritten originals with normal-sized characters. • FINE is good for documents containing a lot of detail. • SUPER FINE works well for documents containing extremely fine detail. SUPER FINE only works if the remote machine also has the SUPER FINE feature.
Confirm" on page 6.4. Automatic redial When you send a fax, if the number you have dialled is busy or there is no answer, the machine will attempt to redial the number every three minutes up to two times. Before redialling, the display shows To redial now, press Start Fax. If you want to redial the number immediately, press Start Fax. Or, press Stop/Clear to cancel redialling and then the machine returns to Standby Mode.
THE FAX MACHINE To set the machine to FAX Mode, press Rcv.Mode/Darkness repeatedly until Fax Mode is displayed. • In Standby Mode, FAX appears in the right hand corner of the display. • When you get a call, the machine answers after the second ring, and receives the fax automatically. When reception is complete, the machine returns to Standby Mode. • If you want to change the ‘Rings to Answer ’ option, see "Rings To Answer" on page 6.10. Receiving in TEL mode To set the machine to TEL Mode, press Rcv.
Receiving in DRPD mode DRPD stands for Distinctive Ring Pattern Detection, which is a telephone company service. It enables a user to use a single telephone line to answer several different telephone numbers. To receive a fax in DRPD mode, you should first set DRPD and activate it. Once you have activated DRPD mode it can be one of the receiving modes which can be selectable by pressing the Rcv.Mode/Darkness button as FAX, TEL and AUTO. To set up DRPD, see "DRPD Mode" on page 6.10. Press Rcv.
CHAPTER 4 THE ANSWERING MACHINE This chapter is only for SF-375TP users. In this chapter, you will learn how to check your TAM (Telephone Answering Machine) greeting message, monitor incoming calls, play/erase messages, and access your machine from a remote telephone. All the instructions in this chapter assume that your fax machine is set to TAM Mode. The SF-375TP uses electronic memory as a recording medium. Recording time is dependent on the content of the message.
Recording your TAM message The TAM (Telephone Answering Machine) message is an greeting message which plays whenever a call comes in and the machine is in TAM Mode. For more information about reception modes, see "Receiving in TAM mode (SF-375TP only)" on page 3.5. 1 Press and hold Greeting until you hear a beep. 2 Speak into the microphone on the Control Panel within 30 cm range from the time you see Record in the display. • You can record a message which lasts up to 20 seconds.
THE ANSWERING MACHINE Simply press Play/Record. • The machine briefly displays recorded time then starts to play the message. This procedure is repeated for all NEW messages. • When the display reads 50s(01/03), ‘01’ is the number of the caller message currently being played and ‘03’ is the total number of new caller messages in memory. ‘50s’ is the play back time for the message currently playing. This time counts down as the message plays back.
Erasing old messages you’ve heard The memory of your machine fills up as messages are recorded. Make room for new messages by erasing old messages that you have already listened to. If the memory becomes full while recording, your machine beeps a warning and disconnects the line. The machine will not function as an answering machine unless you make space by erasing unwanted recorded messages. This is why you should erase old messages. To erase a selected message Press Erase while the message is playing.
THE ANSWERING MACHINE Using the answering machine from a remote phone • When the correct password is recognized by the machine, you will hear two short beeps (the confirmation tone). 3 Enter the Remote Command corresponding to the operation within 15 seconds. • When the specified operation is complete, you hear a short beep. You can then enter another command for another operation.
CHAPTER 5 ADVANCED FAX In this chapter, you will learn how to use the advanced fax features of your machine. For example, how to send the same documents to many different locations (Broadcasting) or how to set up your machine to send faxes at a preset time (Delayed Fax).
Broadcasting With Broadcasting you can programme your machine to automatically scan and send documents to a number of different recipients. The documents are automatically erased from memory when Broadcasting is finished. 1 Turn the document face down and feed it into the machine. 2 Press Menu. 3 Press Left/right arrow buttons to choose ADVANCED FAX and press OK. 4 Select Set Broadcasting by pressing Left/right arrow buttons, and press OK. 5 Enter the fax number.
My Favorites enables you to store documents that are frequently faxed and send them to selected fax numbers without the originals. Store a document into memory and give the document an ID name. When you use this feature, set contrast to PHOTO by pressing Rcv.Mode/Darkness is not supported. Saving documents 1 Turn the document face down and feed it into the machine. 2 Press My Favorites repeatedly and press OK when Save appears.
Polling Polling enables you (or a remote fax machine) to retrieve a document. This is useful when a person who has a document to be sent is leaving the office. The person who wants to receive the document at a later time places a call to the machine holding the original, and requests that the document be sent. In other words, it “requests” the machine holding the original. Setting send polling You can programme your fax machine to send documents in your absence when it is requested by a remote fax machine.
Fax forwarding While you are away from your home or office, you do not have to miss important faxes. Your machine can forward any faxes it receives to a fax machine at your new location, and it can print a copy for you to review when you get back as well. 1 Press Menu repeatedly, and press OK when ADVANCED FAX appears. 2 Select Set Fax Forward by pressing Left/right arrow buttons, and press OK. The display shows Off, Forward or Forward & Print whenever you press Left/right arrow buttons.
Received fax remote notifcation (SF-375TP only) While you are away from your home or office, you can know if there is a new fax or not. Your machine can send a voice message with a recorded number you select when the new fax comes in. 1 Press Menu repeatedly, and press OK when ADVANCED FAX appears. 2 Select Set Fax Notice by pressing Left/right arrow buttons, and press OK. The display shows Off or On whenever you press Left/right arrow buttons.
CHAPTER 6 SPECIAL FEATURES
Inserting a pause With some private telephone systems, you must dial an access code (9, for example) and listen for a second dial tone before dialling an outside number. In such cases, you need to insert a pause in the number when you are registering Auto Dial such as a One-Touch or Speed Dial number. If you are asked for the number when setting up Auto Dial, follow this procedure: Press Redial/Pause to insert a pause while entering the number.
SPECIAL FEATURES Recording a conversation (SF-375TP only) SPECIAL FEATURES While you are talking on the phone via speaker phone you may need to record the conversation for tracking a story. Your machine provides this convenience for your purpose. To record the conversation Press Play/Record while you are speaking. • The machine starts to record the conversation, and recording time is unlimited before memory is full. • The recorded conversation will be treated as an incoming message (ICM).
User reports Your fax machine can print reports containing useful information - Scheduled Info, System Data, Help report, etc. To print a report 1 Press Menu respectively until REPORTS appears, and press OK. 2 Choose the report you want by using Left/right arrow buttons. 3 Press OK when the desired report is displayed. The selected report will be printed.
SPECIAL FEATURES You may sometimes need to re-print a received fax. Your machine stores the most recently received faxes in memory. As this memory is filled, old faxes that have been printed will be erased to make room for new faxes. To access this facility: 1 Press Menu respectively until REPORTS appears, and press OK. 2 Press Left/right arrow buttons to choose Print Fax, and press OK.
Using Short Message Service (SMS) Your machine supports the short message service. Using this feature, you can transmit short messages sending to other machine and receive short messages coming from other machines such as faxes, computers, or mobile phones. When you read or print your messages, the font not supported by your machine appears as blank. See page 9.5 and page 9.6 for information about font available with your machine. Reading SMS messages You can read sent and received messages .
SPECIAL FEATURES 7 Then Sending... appears in the display. Printing SMS messages 1 Press Menu repeatedly until SHORT MESSAGE appears, and press OK. 2 Select Print by pressing Left/right arrow buttons and press OK. 3 Press Left/right arrow buttons until the menu item you want appears, and press OK. SPECIAL FEATURES You can print sent and received messages . • You can choose Print Sent SMS, Print RCV. SMS. The selected menu item prints out.
Register flow: Your machine is capable of transmitting and receiving SMS text messages from any SMS capable device. Prior to transmitting and receiving SMS messages you must subscribe to the Caller Display Service on the line that the facsimile device is to be connected to. Please contact your telecoms provider to have this service enabled. Having subscribed to the Caller Display Service, your machine must be registered with your telecoms provider.
SPECIAL FEATURES Clearing memory 1 Press Menu repeatedly until MEMORY CLEAR appears, and press OK. The display shows the type of information you can clear from memory. 2 Select what you want to delete by pressing Left/right arrow buttons, and press OK. 3 Select ‘Y’ and press OK when the machine asks if you are sure. SPECIAL FEATURES You can selectively clear information stored in your machine’s memory. • The types of information you can clear are: Delete your system ID.
When you have entered System Setup, now you can see one of the options in the display by selecting Left/right arrow buttons. The right column shows the suboptions belonging to the options. Option Suboption Ink Save Used for less ink consumption. It toggles On and Off. Silent Mode Used when you want to turn off all sounds made by the machine. Language The LCD Language setting determines the language of the text that appears on the control panel display and information printing.
SPECIAL FEATURES You can prevent the Image TCR (Transmission Confirmation Report) from being included in the confirmation report for privacy or security protection. Dial Moded Set the dialling mode to the type of the exchange to which you are connected. Behind PABXd If your machine is connected to the line from PABX (Private Automatic Branch eXchange), you need to enable this option by selection On. a. b. c. d. Error Correction Mode This option may not work when connected to a PABX.
CHAPTER 7 USING PRINTING This chapter is only for SF-371P and SF-375TP users.
Making Connection Connect the USB cable which came with your machine. • The “New Hardware found” message is shown, click the “cancel” button. Installing Printer Software This printer supports only black print. You must install software using the supplied Printer Software CD after you have set up your machine and connected it to your computer. System Requirements Verify the following: • At least 128 MB (Windows 2000), 256 MB (Windows XP), 1024 MB (Windows Vista) or more of RAM is installed on your PC.
USING PRINTING After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next. 4 If the test page prints out correctly, click Yes. If not, click No to reprint it. 5 To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site. Otherwise, just click Finish.
Setting the dafault printer To set your printer as the default printer, follow the below steps: 1 Click the Windows Start menu. 2 For Windows 2000, select Settings and then Printers. For Windows XP, select Printers and Faxes. For Windows Vista, select Control Panel > Hardware and Sound > Printers. 3 Select Samsung SF-370_CF-370 Series printer. 4 Click the right mouse button on the printer icon and: 5 For Windows 2000/XP/Vista, select Set as Default Printers.
USING PRINTING Removing Printer Software You can select Start > Programs > Samsung SF-370_CF-370 Series > Maintenance. 2 Select Remove and click Next. 3 After the software is removed, click Finish. The following procedure describes the general steps required for printing from various Windows applications. The exact steps for printing a document may vary depending on the application program you are using. Refer to the user’s guide of your software application for the exact printing procedure.
The orientation option allows you to select the direction in which information is printed on a page. • Portrait prints across the width of the page, letter style. • Landscape prints across the length of the page, spreadsheet style. Landscape Portrait The Pages per Sheet option allows you to select the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages are smaller.
USING PRINTING • Click the right mouse button on the printer icon and: • For Windows 2000/XP, select Printing Preferences. For Windows Vista, select Properties. • Change the settings on each tab and click OK. If the print job is waiting in a print queue or print spooler, such as the Printer group in Windows, delete the job as follows: • Click the Windows Start menu. • For Windows 2000, Select Settings and then Printers. For Windows XP, select Printers and Faxes.
CHAPTER 8 CARE AND MAINTENANCE
Cleaning the document scanner To keep your machine working properly, occasionally clean the White Roller, ADF (Automatic Document Feeder) Rubber, and the Scanning Glass. If they are dirty, documents sent to another fax machine won’t be clear. If you turn the power off to clean the scanner, documents stored in memory will be lost. 1 Open the Control Panel. 2 Remove the White Roller. • At the right-hand end of the White Roller there is a bushing that is secured with a small tab.
• mono: INK-M41/41V for European countries. INK-M43 for India and South Africa. 1 Prepare a cartridge. CARE AND MAINTENANCE • Take out a cartridge from its packaging and carefully remove the tape covering the printhead. • Hold the cartridge by the colored top or black areas only. Do not touch the copper area. CARE AND MAINTENANCE When you notice that the print becomes light or Ink Low. Install new ink cartridge appears in the display, replace the print cartridge.
Cleaning the printhead If the nozzles seem to be clogged and characters are not printing completely, clean the printhead as described below: 1 Press Menu repeatedly until MAINTENANCE appears, and press OK. 2 Scroll to Clean Head by pressing Left/right arrow buttons, and press OK. 3 Examine the printed test pattern. • If print quality does not improve, reinstall the cartridge and repeat Clean Head. • If the line is still broken, wipe the nozzles and contacts.
CARE AND MAINTENANCE Self testing Print cartridge maintenance The print cartridge life is very sensitive to the content of the received fax or a copy you made. To increase its life, we recommend you follow the instructions below: • DO NOT unpack the cartridge until you are ready to use it. • Store it in the same environment as the printer. • If you have unpacked the cartridge but are not using it, store it in a storage unit.
Cleaning the cartridge carrier contacts Before cleaning these parts, there should be no scheduled job such as Delayed Fax, Send Polling, or faxes received into memory. Once you have unplugged the power cord from the machine, all data will be lost. 1 Press Cartridge Change. 2 Open the Control Panel and Cartridge Compartment Cover and remove the cartridge. 3 Remove the print cartridge. 4 Unplug the power cord from the electrical outlet of the rear of the machine.
CARE AND MAINTENANCE LCD error messages Related to: Adjust scanner first in Maintenance menu The shading waveform to be used as a reference is corrupted due Scanner to unknown reason. Adjust the scanner to fix this problem as described in "Shading adjustment" on page 8.4. Check white paper document and try again The scanning level is too low to compare with reference level. To adjust shading, you should use the plain and white paper.
Display Status/Solution Related to: Memory Full Memory has become full while receiving a fax or short message. Fax/Telephone Memory Full Press OK to continue Memory has become full while scanning a document. Press OK to send or copy the scanned pages only. To cancel the job press Stop/Clear and try again when memory becomes available, or split the new document into smaller parts. Fax/Copy Memory Received When it toggles with: The machine has data stored in memory.
Related to: There is an error while sending a fax. Fax System Initial It indicates that the machine is initializing when the power is on. System To Clear Carrier Stall Error, Press Stop/Clear The cartridge carrier is stalled during printing or copying. Paper To redial now, press Start Fax The machine is waiting to automatically redial the fax number that was busy or did not answer. Fax Used Cartridge is installed You tried to install a used pen with selecting New option.
Fixing Problems Your problem may be listed in "LCD error messages" on page 8.7. The chart below shows other problems you can solve yourself. If not, call the service company shown in the separate Warranty Card. Fax problems Problem Solution The machine is not working, there is no display and the buttons are not working. Unplug the power cord and plug it in again. Check that your socket is live. No dial tone. Check that the phone is connected properly.
Characters with white lines. If Ink Low. Install new ink cartridge is displayed, install a new print cartridge as described in "Replacing the print cartridge" on page 8.3. Remove and reinstall the print cartridge. Clean the print cartridge (see "Cleaning the cartridge" on page 8.5). Improperly formed or misaligned characters. Clean the print cartridge (see "Cleaning the cartridge" on page 8.5).
Clearing jams Document jams during transmission If a document jams during transmission or copying, Remove jammed document appears in the display. DO NOT pull the document out of the slot. Doing so could harm your machine. To clear document jam: 1 Open the Control Panel. 2 Carefully remove the jammed document. 3 Close the Control Panel firmly until it clicks into place.
CHAPTER 9 APPENDIX
Specifications General specifications Item Description ADF (Automatic Document Up to 15 sheets (0.1 mm thickness, 75 g/m2 bond) Feeder) ADF document size Width: 148 to 216 mm Length: 128 to 390 mm ASF (Automatic Sheet Up to 50 sheets (75 g/m2 bond) Feeder) ASF document size A4 (210 x 297 mm), Letter (216 x 279 mm), Legal (216 x 356 mm) Consumables 1-piece Ink cartridge system Power rating See Rating label attached on the back of the machine. Power consumption Standby: 4.
APPENDIX a. Print speed will be affected by operating system used, computing performance, application software, connecting method, media size, and job complexity. b. Please visit www.samsungprint.com to download the latest software version.
A sample of ITU #1 chart (reduced to 60.5%) 9.
9.
Font List for LCD 9.
APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX Replacing the fitted plug (UK) 9.
Declaration of conformity (European countries) 9.
APPENDIX 9.
In case of interference (US) Fax branding (US) See "Chapter 1" for instructions on how to enter this information into your Samsung FAX machine’s memory. 9.
9.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
INDEX A ADF 8.2, 9.2 alignment 8.3 appearance 1.3 ASF 1.5, 8.11 auto journal 6.10 auto reduction 6.10 B broadcasting 1.2, 3.3, 5.1, 5.2, 8.7 C call monitor 1.2, 4.2, 6.11 caller id 2.3, 2.4, 6.2, 6.4, 6.5, 6.10, 8.8 canceling print 7.7 cartridge alignment 8.4 cleaning 8.4, 8.5, 8.6, 8.11 ink level 8.4 installation 8.7, 8.8, 8.11 maintenance 8.5 replacing 1.4, 8.3, 8.7, 8.9, 8.11 contrast 3.2, 3.3 control panel 1.4, 2.2, 3.2, 4.2, 4.5, 8.2, 8.3, 8.5, 8.6, 8.12 D Darkness 6.11 darkness 1.4 default printer 7.
polling 1.2, 5.4, 6.4, 8.6, 8.8, 8.10 printer driver install 7.2 uninstall 7.5 R receive mode auto mode 3.4, 3.5 DRPD 1.2, 3.4, 3.6, 6.10 fax mode 3.5, 5.4 TAM mode 1.4, 3.4, 3.5, 4.1, 4.2, 4.5, 6.11 tel mode 3.5, 8.10 remote command 4.5 remote commands 4.5 remote password 4.5, 6.11 remote test 6.10 report 1.2, 6.4, 6.9, 6.10, 8.5, 8.7, 8.10 resolution 1.6, 2.3, 3.2, 3.3, 6.10 ring volume 1.8 rings to answer 3.5, 6.10, 6.11 S save charge 6.11 scanning glass 8.2 scheduled job 5.4, 8.6, 8.7, 8.8 search 1.
www.samsungprinter.
