Datasheet

Select Languages
English
Category
SE-T084L
External DVD Writer
DISC
Usable Discs
DVD
:DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM,
DVD-Video, DVD+R (Dual), DVD-R (Dual), Light
Scribe DVD±R , DVD-RAM
CD
: CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G)
CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD
CD-I, CD-I Bridge (Photo-CD, Video-CD),
Multisession CD (Photo-CD, CD-EXTRA, Portforio),
Light Scribe CD-R
Disc Diameter 4.72 Inch or 3.15 Inch (120mm or 80mm)
Interface Support
Interface Port USB 2.0
ACCESS TIME
(Random)
CD-ROM 160ms (Random)
DVD-ROM 160ms (Random)
Disc
Labeling
Time
Setting Titles only Titles and contents
The entire label area
(including graphics)
Best
Less than 4 min Less than 9 min Less than 36 minutes
Normal
Less than 3 min Less than 7 min Less than 28 minutes
Draft
Less than 2 min Less than 4 min Less than 20 minutes
Data
Transfer
Speed
Format/
Speed
AC Adaptor(MAX) USB Power
Read Write Read Write
DVD-RAM PCAV 5X PCAV 5X CLV 2X CLV 2X
DVD-R CAV 8X PCAV 8X CAV 4X ZCLV 4X
DVD-RW CAV 8X ZCLV 6X CAV 4X ZCLV 4X
DVD-R DL CAV 8X ZCLV 4X CAV 4X ZCLV 4X
DVD+R CAV 8X PCAV 8X CAV 4X ZCLV 4X
DVD+RW CAV 8X ZCLV 8X CAV 4X ZCLV 4X
DVD+R DL CAV 8X ZCLV 6X CAV 4X ZCLV 4X
DVD-ROM CAV 8X - CAV 4X -
CD-R CAV 24X CAV 24X CAV 10X CLV 10X
CD-RW CAV 24X ZCLV 24X CAV 10X CLV 10X
CD-ROM CAV 24X - CAV 10X -
Buffer Memory
2MB
Drive Installation
Horizontal
Operating
Environment
Temperature 41°F ~ 104 °F (5°c ~ 40°C)
Humidity 10% ~ 80% (RH)
Size(Width x Height x
Length)
5.55 X 0.80 X6.18 Inch (141 X 20.3 X 157mm)
Weight
370g
Note
Does not support DVD-R for Authoring.
Cannot playback or record on both sides of a two-sided disc simultaneously.
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Severe vibration or external impact may decrease the quality of printed images.
Please firmly place the product onto the PC before use.
In case of disc identification error message, thoroughly clean the surface of the disc
where the label is presented and then start printing.
The quality of the printed image cannot be ensured if printing an image on the area
which is already used for printing.
For more information on the writing and duplicating the Lightscribe disk label,