Compact & Clear High Resolution Day & Night Dome Camera SID-45C/46C User’s Manual SALES NETWORK • SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do 462-703, Korea TEL : +82-31-740-8137~8139 FAX : +82-31-740-8145 • SAMSUNG OPTO-ELECTRONICS UK, LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS TEL : +44-1932-45-5308 FAX : +44-1932-45-5325 www.samsungtechwin.com www.samsungcctv.com • TIANJIN SAMSUNG OPTO-ELECTRONICS CO.
Before operating the camera, confirm the camera model and proper input power voltage. In order that you can understand this manual thoroughly, we'll introduce our model description.
Features Horizontal Resolution 530 TV Lines High Sensitivity Clear image quility has been achieved by employing a CCD with 410,000 pixels(NTSC), 470,000 pixels(PAL) and optimized WINNER3 DSP CHIP which provides a horizontal resolution of 530 TV lines. The built-in high sensitivity COLOR CCD enables a clear image even in 0.002Lux (Sens-up) or lower illumination.
Contents Precautions 8 Composition 10 Name and Function of Each Part 11 11 12 Front Back • SHUTTER (condition and speed control) 17 17 18 19 • WHITE BALANCE control 20 • BACKLIGHT (Backlight Compensation) 22 • AGC (Auto Gain Control) 23 • SSNR (Samsung Super Noise reduction) 24 26 Camera Operation Menu Setting • SPECIAL Installation Installing Camera Connecting To Monitor Connecting To Power Panning & Tilting Control 13 13 14 15 16 Troubleshooting 32 Specification 34 Dimension 35
Precautions Do not install the camera in extreme temperature conditions. Do not install or use the camera in an environment where the humidity is high. Only use the camera under conditions where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures. It can cause the image quality to be poor. Do not install the camera under unstable lighting conditions. Never use the camera close to a gas or oil leak.
Composition Name and Function of Each Part FRONT 1. HIGH RESOLUTION DAY & NIGHT DOME CAMERA SID-45C/46C 2. Instruction Manual Pan Base You can rotate the lens from 340˚ 3. M3 Tapping Screws 4EA PCB Front Cover Tilt Base You can adjust up and down the camera(30°~90°). Funtion Setting Button SETUP button : Used for the menu display. Conform the status of the selected function. 4. Bracket LEFT & RIGHT button: Used when changing item values, by moving the cursor to the left or right on the menu screen.
Name and Function of Each Part Installation Installing Camera BACK 1. Fix the Bracket to suitable position where the camera will be installed. 2. After inserting the Bracket pin to camera hole, rotate the camera right. 3. After adjusting the camera, cover the Dome-Cover.
Installation Connecting to a Monitor Connecting to Power Please connect the video output terminal located on the back of the camera to the monitor. •The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. •Please turn off the power when connecting. •Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and select 75Ω for the Intermediate device as shown in the picture below.
Camera Operation Installation Panning & Tilting Control Menu You can adjust the Panning and Tilting angle freely. (Panning angle: 0˚ to 340˚, Tilting angle: 30˚~90˚) 1. Adjustment Panning angle: After attaching the dome camera to ceiling, adjust the panning angle for better monitoring area by rotating the Pan Base. The panning angle can be adjusted to 0˚ from 340˚ freely. 2.
Camera Operation Settings Settings can be made using the 5 buttons located on the inside of the camera. SET button Modes can be changed using the LEFT and RIGHT buttons. Select any function you wish to operate by using the UP and DOWN buttons. DOWN button LEFT button UP button RIGHT button 1. Please press the SETUP button •Settings can now be made. The SETUP menu is displayed on the monitor. 3. Please press the LEFT or RIGHT button if you wish to change mode.
Camera Operation FLK: Please select 'FLK' mode when flickering occurs on the screen, due to an imbalance between illumination and frequency. NTSC Model:1/100, PAL MODEL: 1/120 ESC: Auto control of the shutter speed can be achieved. When ESC mode is on, the speed is controlled automatically according to the brightness of the screen. MANUAL: The shutter speed can be controlled manually. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
Camera Operation BACKLIGHT (Backlight Compensation) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. HIGH/MIDDLE/LOW: You can adjust the sensitivity of Backlight Compensation.
Camera Operation SSNR (Samsung Super Noise reduction) The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. 1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using the UP and DOWN buttons. 2.
Camera Operation 3) Please press the SETUP button. SPECIAL Camera ID ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz -. 123456789 CLR POS END 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. 4) Up to 15 letters can be used for the ID. Please move the cursor to the letter you wish to choose by using the UP and DOWN button.
Camera Operation 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. Camera ID ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz -. 123456789 CLR POS END The name will appear at the top left hand corner. Notes •If AGC is OFF, you can’t select AUTO mode. •When an infrared light is used, there may be a problem with focusing and COLOR (DAY & NIGHT).
Camera Operation •Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button. MIRROR - ON : Sets a horizontal image inversion. - OFF : Cancels the inversion. MIRROR ON •Please press the SETUP button to save the changes and complete the setting. Notes •'MD' is on screen display only words. MIRROR OFF SHARPNESS: The outline of the video image becomes cleaner and more distinctive as the level of SHARPNESS increases.
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Nothing appears on the screen. The video image is not clear. Solution Problem Solution The MOTION DETECTION function is not working. • Please check the video signal line connection. • Please check the Brightness of Auto Iris lens. Colors are not quite right. • Please check the 'WHITE BAL' setting.
Dimension Specifications ITEM SID-45CN Input Voltage POWER Power Consumption C Sensor C Total Pixels D Effective Pixels Scanning System S y Synchronization n c. Frequency Video Output Resolution S/N (Y signal) Min. Illumination Back Light Compensation COLOR (DAY&NIGHT) Gain Control White Balance Electronic shutter speed SID-45CP SID-46CP DC 12V ± 10% Max. 1.8W 1/3 inch, Sony Super HAD CCD 811(H) x 508(V) 795(H) x 596(V) 768(H) x 494(V) 752(H) x 582(V) 2:1 Interlace Internal H : 15.734KHz / V : 59.
DECLARATION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SID-45CP Beginning Serial NO. S6700001 Year of Manufacture 2006. 7.
MEMO MEMO
