SecureVIEW™ Baby Monitor User Manual SEW-3035 If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product. SEW-3035-ENGLISH.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). • Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. • Use only the AC adapters provided with the product, as other adapters may damage the product.
Getting Started What’s Included The system comes with the following components: Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure and private signal • Up to 350ft (about 100m) wireless open space transmission range. The actual range may vary depending on the use environment.
Getting to know your Monitoring system Wireless Receiver 01 After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls MENU Button 3.5” LCD Screen Displays video from the camera. SLEEP / Press to access the receiver menu. Press the button again to exit. SEW-3035 Button Used to activate the screen saver mode. Press the [A/M] or [SLEEP] button again to exit the screen saver mode.
Back Controls A/M record Antenna Locking Switch Press to auto record or manual record during monitoring. Only available when the Micro SD card is inserted.* REC [A] : Start recording when an alarm is detected. REC [M] : Start recording when the button is pressed. Slide the switch to unlocking position, the receiver antenna will pop up. Then you can adjust the antenna for better signal reception. Speaker Night Light Button Produces the sound transmitted from the camera(s).
Wireless Camera Front & Back Controls Camera Antenna Lens/IR LED Cover Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the receiver. Charging Indication LED LED is off when there is no rechargeable battery inside the camera base; the LED is red when the rechargeable battery pack is charging; the LED turns off when the rechargeable battery is fully charged. n ` ` ` Press to turn the night light ON or OFF.
Side Controls Camera ON/OFF Switch Sound Alarm Trigger Turns the camera ON or OFF. Adjust the sensitivity knob to set the sound alarm sensitivity. The receiver will beep to alert you when the sound is above a preset sound level. Adjust to increase or decrease the level of sensitivity. Camera on and low battery indication Turn on the camera, the LED light will blink green once; Low battery, the LED will blink repeatedly. When the camera is turned on, the LED light would appear green.
Installation How to Install 1. 2. Caution if you use the system to watch a young child, do not place the camera where the child can reach. Place the receiver in a place that will have clear reception with your camera(s). 2. Pull out the stand. n ` Do not pull up the stand lever with an excessive force. Otherwise, it may be broken. n 3.
Viewing Mode Display Wireless Receiver SEW-3035 Night light Press [ ] in the wireless receiver to remotely turn on/off the night light on the wireless camera currently being displayed. An indicator light will be visible if on. Auto Mute If you set Auto Mute to , the applicable message appears on the screen. Micro SD card status Indicates when a Micro SD card is inserted. It indicates that micro SD card get full capacity when the icon is red,and card has some spaces when icon is white.
Menu Operation Power Saving Enables receiver power save mode (when no activity on the camera is detected). The Power Saving Menu is used to turn off the screen at a predetermined time, to conserve battery power. After selected time, the monitor will go to a select screen saver or black screen if blank is selected as the screen saver. Power Saving mode will be deactivated by pushing [A], [M] or [SLEEP] on the front panel of monitor or by higher sound detected by cameras.
Alarm Setting Sets the time value with HH, MM and select the ON or OFF to decide alarm or not. Pairing Camera 1. Date Setting Sets the year, month, date value to show in the monitor screen. Power on and turn the switch to ON. The power LED for the camera and receiver should be ON. 2. Press the [MENU] button on the receiver. 3. Date Format Sets the date format to show in the monitor screen. Select Pairing menu by pressing [A] or [M] key. Press the [ ] button to go into the Pairing menu. 4.
Appendix Selecting a Memory Card For Video Recording Your Samsung BabyVIEW™ baby monitor supports MicroSD memory cards. You may experience compatibility issues depending on the model and maker of the memory card. For your Samsung BabyVIEW™ baby monitor, we recommend you use a MicroSD memory card from the following manufacturers: Sandisk® and Kingston®. However, these memory card brands are only recommendations, and other Micro SD card brands will function with your baby monitor. Micro SD Card Capacity 2.
Using Your Monitor with Skype™ Using Your Monitor with MSN™ 1. Install USB Driver (see previous section). 1. Install USB Driver (Page 13). 2. Connect your monitor to a PC. Your monitor should indicate that it is in "USB PC CAMERA MODE". 2. Connect your monitor to a PC. Your monitor should indicate that it is in "USB PC CAMERA MODE". 3. Install and Open Skype™. 3. Install and Open MSN™. 4. Select "Echo / Sound Test Service" under contacts.
Specifications Item Camera Details Item 2.0 Mbps Transmitting Power 16dBm (MAX) Modulation Type GFSK Transmitting Distance 350ft (about 100m) / (Line of Sight) Image Sensor Type 1/4” Color CMOS Image Sensor Effective Pixels H: 640 V: 480 Image Processing Motion JPEG Image Resolution / Frame Rate H: 640 V: 480 / 12 fps Max (H: 320, V:240 / 20 fps) White Balance Auto Lens 4.9mm / F2.
Troubleshooting Problem Solution The monitor beeps or vibrates for no apparent reason The unit may be beeping or vibrating because the sound sensitivity on the camera is too high. No picture from a camera 1. 2. 3. 4. 5. 6. Audio problems The picture is or has become choppy The Picture appears to be grainy when using AV out function to view on a large screen TV/Monitor n ` 16 · Appendix 1. Try lowering the sound alarm trigger on the camera (shown on page 6) to an appropriate sensitivity level.
67mm [2.6 inch] TEMPLATE Screw holes for the Camera installation This template is used to install the camera on the wall. CAMERA FRONT SEW-3035-ENGLISH.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungsv.com SEW-3035-ENGLISH.indd 18 SAMSUNG TECHWIN EUROPE LTD.
