Ultra High Resolution Camera SDC-435 User Guide Before installing and operating this product, please read this manual thoroughly.
Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model pert numbers.
Features Contents • Features…………………………………………………………………………… 5 • Warnings & Cautions… ……………………………………………………… 6 • Precautions… …………………………………………………………………… 7 • Components and Accessories……………………………………………… 8 • Overview…………………………………………………………………………… 9 • Installation… …………………………………………………………………… 10 ■ LENS………………………………………………………………………………………… ■ Connecting to the Monitor… ………………………………………………………… ■ Using Coaxial Communications……………………………………………………… ■ Connecting to the Power……………………………………………………………… 10… • Operating your Came
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment.
Precautions Overview Do not expose the camera to rain or other types of liquids. Front View Do not expose the camera to radioactivity. Side View 5 4 3 2 1 May cause a product malfunction.Wipe dry any liquids. Liquids may contain minerals that are corrosive to electronic components. Radioactivity exposure may damage the CCD. Notes • Exposure to the spotlights or objects reflecting bright light, smearing or blooming may occur.
Installation Overview When Using Auto Iris Lens Rear View 1. Strip the insulation of the auto iris lens cable 8mm from the end. 7 2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length. 2mm 8mm 9 8 ❿ *High Voltage Type 7 Power lamp : Lights up when the correct power is supplied to the camera. 8 Function Setup Button •SETUP button : Displays the menu on the screen and uses enter sub menu. •Up&Down button : Used to move the cursor up or down in the menu screen.
• The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. • Please turn off the power when connecting. • Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and select 75Ω for the Intermediate device as shown in the picture below. Installation When using a CS-Mount lens 1. Please take off the CCD protection cap and C-mount adaptor. C-mount adaptor CCD Camera Intermediate 2.
Installation Operating Your Camera Menu Configuration Connecting to the Power Each model has a different power input specification. Please check the model type and standard power requirement before connecting to power. AC/DC Power Type DC Power Type • Use AC24V, 300mA adaptor or DC12V, 500mA for SDC-435N/P MAIN MENU LENS EXPOSURE • Use DC12V, 500mA for SDC-435ND/PD WHITE BALANCE SSDR BACKLIGHT SSNR3 DAY/NIGHT SPECIAL EXIT ●DC ●BRIGHTNESS ●SENS-UP ●ATW ●MANUAL ●OFF ●OFF ●OFF ●COLOR ●IMAGE ADJ.
Operating Your Camera Select the function using the UP or DOWN button. MAIN MENU 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT 8.SPECIAL 9.EXIT DC Change the status using the LEFT or RIGHT button. ATW OFF OFF ON COLOR SAVE 2. Select a desired function using the Up and Down buttons. • Place the cursor over a desired item. 3. Set up a selected item by using the Left and Right buttons. 4. To finish the setting, select ‘EXIT’ and press the SET button.
Operating Your Camera SHUTTER : You can select either auto or manual shutter. - --: Shutter speed is fixed at 1/60sec(1/50sec). - A.FLK : Select this when you experience picture flicker, which can happen when there is a clash with the frequency of the installed lighting. - ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is automatically controlled depending on the ambient illumination of the subject. - MANUAL : You can control shutter speed manually.
Operating Your Camera SSDR (Samsung Super Dynamic Range) MAIN MENU 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. MAIN MENU 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT DC DC ATW OFF OFF 2. S elect a desired mode using the Left and Right buttons depending on the camera purpose.
Operating Your Camera DAY/NIGHT Notes • Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. • When dark, the HLC is only activated when a bright light exceeding a specific size.in NIGHT ONLY mode. • The HLC is not activated in day light or when bright light is not present at night.in NIGHT ONLY mode. You can display pictures in color or black and white. 1.
Operating Your Camera 2) Select a desired mode using the Up and Down buttons. SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. MAIN MENU 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT 8.SPECIAL 9.EXIT DC ATW OFF OFF ON COLOR SAVE 2. Select a desired mode using the Up and Down buttons. 1. 2. 3. 4. 5. 6. 7. 8. 9.
Operating Your Camera CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Up and Down buttons so that the arrow indicates ‘CAM TITLE’. 2) Set it to ‘ON’ by using the Left and Right buttons. CAMERA TITLE SETUP 3) Press the SET button. 4) Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET button. Repeat this to enter multiple letters. You can enter up to 15 letters.
Operating Your Camera 1) When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow indicates ‘PRIVACY’. 2) Set up the mode using the 4 direction buttons. - AREA SEL : You can select up to 12 PRIVACY areas. - MODE : Determines whether to use the area selected in the AREA SEL. - MASK COLOR : D etermine area color. You can select Green, Red, Blue, Black, White, Gray. - MASK TONE : Adjust the brightness of MASK COLOR.
Specifications SDC-435ND ELECTRICAL Input Voltage Power Consumption VIDEO Imaging Device Total Pixels Effective Pixels Scanning System Synchronization Frequency Horizontal Resolution Min.
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE CO., LTD.
