HIGH RESOLUTION COLOR CCD CAMERA INSTRUCTION MANUAL SDC-415 SERIES Please read this manual carefully before installing and using the product. SALES NETWORK •SAMSUNG TECHWIN CO., LTD. Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong, Jungwon-Gu, Sungnam, Gyeonggi-do, Korea 462-703 TEL: 82-31-740-8137~41 FAX: 82-31-740-8145 •SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA) Closed Circuit Division 40 Seaview Drive, Secaucus NJ 07094, U.S.
Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
Warning Features Horizontal Resolution 530 TV Lines High Sensitivity Clear image quality has been achieved by employing a SONY CCD with 410,000 (effective) pixels, which provides a horizontal resolution of 530 TV lines. The built-in high sensitivity SONY COLOR CCD enables a clear image even in 0.3Lux(0.1Lux B/W) or lower illumination. The camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction.
Contents 4 Features 5 Warnings and precautions 22 24 11 • WHITE BALANCE control 25 11 12 13 14 • BACKLIGHT (Backlight Compensation) 26 • AGC (Auto gain compensation) 27 • SSNR (Samsung Super Noise Reduction) 27 • SENS-UP 28 • SPECIAL 30 • EXIT 35 Names and functions of parts ■ Front ■ Back Installation ■ Lens • Using auto iris • Using C/CS mount lens 15 ■ Connecting to a monitor 18 19 15 ■ Connecting to power COLOR CCD CAMERA 6 User’s Manual 20 21 ■ Settings • SHUTTER (condit
Precautions Do not install the camera in extreme temperature conditions. Do not install or use the camera in an environment where the humidity is high. Only use the camera under conditions where temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures. Do not install the camera under unstable lighting conditions. It can cause the image quality to be poor. Do not drop the camera or subject them to physical shocks.
Components Names and Functions of Parts Front 1. COLOR CCD CAMERA SDC-415 SERIES 2. Auto iris lens connection plug 3. C-Mount adaptor Lens protection cap Please cover the lens when not using it. C-Mount lens adaptor Please attach the C-Mount lens here. 4. Instruction manual CS-Mount lens adaptor Please remove the C-MOUNT lens adaptor and then attach it. Back Focus clamp screw Please loosen the clamp screw with a screwdriver before adjusting the Back Focal length.
Names and Functions of Parts Side Bottom Mounting bracket screw hole Please use the screw hole when fixing the camera onto the mounting bracket. Please use the clamp screw as specified below. Auto iris lens connector This is the connection terminal for the auto iris lens. The mounting bracket can be separated and attached to the top of the camera. In this instance please do not tighten the screw to a depth of more than 5mm, otherwise serious damage can occur to the inside of the camera.
Names and Functions of Parts Installation ■ Lens Back Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount lens can be used. Note • Use of the DC auto iris lens is recommended to achieve the best results for operating this product effectively. • Please keep the lens clean. • Any foreign objects and fingermarks on the lens can cause inferior image quality in low light level conditions. When using an auto iris lens 1.
Installation 3. Please remove the cover of the auto iris lens connection plug and solder the lens cable to the connector pin in the plug. Pin No. DC DampingDamping+ Drive+ Drive- No.1 Pin No.2 Pin No.3 Pin No.4 Pin LENS VEDIO Red(power) NC White(video signal) Black(GND) Lens cable When using a C-Mount lens Please take off the lens protection cap and attach the C-Mount lens to the camera by screwing it in clockwise. C-mount adaptor When using a CS-Mount lens 1.
Installation ■ Connecting to a monitor ■ Please connect the video output terminal located on the back of the camera to the monitor. Connecting to power Each model has a different power input specification. Please check the model type and standard power requirement before connecting to power. AC Power Type (AC 24V, 500mA) CCD Camera Monitor DC Power Type (DC 12V, 500mA) • The connection method varies depending on the type of monitor and accessories.
Camera Operation ■ Menu ■ Settings Settings can be made using the 5 buttons located on the side of the camera.
Camera Operation SETUP Select any function you wish to operate by using the UP and DOWN buttons. LENS SHUTTER WHITE BAL. BACKLIGHT AGC SSNR SENS-UP SPECIAL EXIT DC/VIDEO : Auto iris lens selection MANUAL ESC ATW OFF LOW LOW OFF Modes can be changed using the LEFT and RIGHT buttons. 3. Please press the LEFT or RIGHT button if you wish to change mode. • When the LEFT or RIGHT button is pressed, available values and modes are displayed in order.
Camera Operation WHITE BALANCE control SHUTTER (condition and speed control) Auto or manual control can be selected. 1. When the SETUP menu is on the screen, please position the arrow to point to 'SHUTTER' by using the DOWN button. 2. Please select the shutter mode by pressing the LEFT or RIGHT button. FLK : Please select 'FLK' mode when flickering occurs on the screen, due to an imbalance between illumination and frequency.
Camera Operation BACKLIGHT(Backlight Compensation) AGC (Auto Gain Control) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. SETUP LENS SHUTTER WHITE BAL.
Camera Operation SSNR (Samsung Super Noise reduction) The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. SETUP LENS SHUTTER WHITE BAL. BACKLIGHT AGC SSNR SENS-UP SPECIAL 1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using the UP and DOWN buttons. 2.
Camera Operation 3) Please press the SETUP button. SPECIAL Camera ID ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz -. 123456789 CLR POS END 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. SPECIAL CAMERA ID COLOR SYNC MOTION DET PRIVACY MIRROR SHARPNESS RESET RETURN OFF ON INT OFF OFF OFF ON 4) Up to 15 letters can be used for the ID.
Camera Operation 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. Camera ID ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz -. 123456789 CLR POS END • When an infrared light is used, there may be a problem with focusing. SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between cameras without a synchronous generator.
Camera Operation MOTION DETECTION: This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected; hence a single individual can conduct supervision efficiently. The camera detects an object's movement by sensing disparity of outline, and level of brightness and color. • Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled.
Troubleshooting If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Troubleshooting Nothing appears on the screen. Troubleshooting • Please check if 'MOTION DETECTION' mode is turned on. • Please check the power connection. • Please check the setting of the MD AREA. • Please check if the lens is clean. Please clean the lens with a clean cloth or brush. Colors are not quite right.
DECLARATION OF CONFORMITY Specifications Item SDC-415NA Power Source C C D SDC-415ND SDC-415PA AC24V, 60Hz DC12V AC24V, 50Hz DC12V 3.5W(Max) 2.5W(Max) 3.5W(Max) 2.5W(Max) Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Size Synchronization 0~359°(Adjustable) Frequency INT Horizontal:15.734 KHz Vertical :59.94 Hz Resolution 1.0Vp-p/75Ω(Video 0.714Vp-p Sync 0.286Vp-p) S/N (Y signal) SAMSUNG TECHWIN CO.
MEMO MEMO
